[gelöst] LMint20.1 startet verzögert; Win7 & LinMin20.1 Cinnamon 64bit

[haeremai]

Hallo
Ich benutze 2 Festplatten mit je 2 OS.
Auf Platte sda ist Win7 und LinMint20.1 und auf Platte sdb ist Ubuntu20.04 und auch LinMint20.1 installiert.
Um LinMint20.1 auf sda zu starten dauert es ca. 1,5 min.
Ich füge  Terminalausgaben bei, vielleicht könnt Ihr damit etwas anfangen.

Danke für Hilfe
 

Code: [Auswählen]

servus@servus-desktop ~ $ inxi -Fz
System:
  Kernel: 5.4.0-65-generic x86_64 bits: 64 Desktop: Cinnamon 4.6.7
  Distro: Linux Mint 20 Ulyana
Machine:
  Type: Desktop Mobo: ASRock model: FM2A88X Extreme4+ serial: <filter>
  UEFI [Legacy]: American Megatrends v: P3.00 date: 02/05/2016
CPU:
  Topology: Quad Core model: AMD A10-7800 Radeon R7 12 Compute Cores 4C+8G
  bits: 64 type: MCP L2 cache: 2048 KiB
  Speed: 1749 MHz min/max: 1400/3500 MHz Core speeds (MHz): 1: 1754 2: 1737
  3: 1397 4: 1396
Graphics:
  Device-1: AMD Kaveri [Radeon R7 Graphics] driver: radeon v: kernel
  Display: x11 server: X.Org 1.20.9 driver: ati,radeon
  unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
  OpenGL: renderer: AMD KAVERI (DRM 2.50.0 5.4.0-65-generic LLVM 11.0.0)
  v: 4.5 Mesa 20.2.6
Audio:
  Device-1: AMD Kaveri HDMI/DP Audio driver: snd_hda_intel
  Device-2: AMD FCH Azalia driver: snd_hda_intel
  Sound Server: ALSA v: k5.4.0-65-generic
Network:
  Device-1: Qualcomm Atheros QCA8171 Gigabit Ethernet driver: alx
  IF: enp4s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 698.65 GiB used: 28.93 GiB (4.1%)
  ID-1: /dev/sda vendor: Samsung model: SSD 850 EVO 500GB size: 465.76 GiB
  ID-2: /dev/sdb vendor: Samsung model: SSD 840 EVO 250GB size: 232.89 GiB
Partition:
  ID-1: / size: 22.22 GiB used: 13.60 GiB (61.2%) fs: ext4 dev: /dev/sda5
  ID-2: /home size: 96.00 GiB used: 15.33 GiB (16.0%) fs: ext4
  dev: /dev/sda7
  ID-3: swap-1 size: 4.64 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/sda6
Sensors:
  System Temperatures: cpu: 0.0 C mobo: N/A
  Fan Speeds (RPM): N/A
Info:
  Processes: 194 Uptime: 18m Memory: 6.73 GiB used: 1.44 GiB (21.5%)
  Shell: bash inxi: 3.0.38
servus@servus-desktop ~ $


Code: [Auswählen]

servus@servus-desktop ~ $ systemd-analyze
Startup finished in 4.352s (kernel) + 1min 31.595s (userspace) = 1min 35.947s
graphical.target reached after 1min 31.561s in userspace
servus@servus-desktop ~ $


Code: [Auswählen]

systemd-analyze blame

Code: [Auswählen]

servus@servus-desktop ~ $ systemd-analyze critical-chain
The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.

graphical.target @1min 31.561s
└─multi-user.target @1min 31.560s
  └─getty.target @1min 31.560s
    └─getty@tty1.service @1min 31.560s
      └─system-getty.slice @1min 31.559s
        └─setvtrgb.service @1min 31.528s +29ms
          └─systemd-user-sessions.service @1min 30.748s +12ms
            └─network.target @1min 30.744s
              └─NetworkManager.service @1min 30.525s +218ms
                └─dbus.service @1min 30.517s
                  └─basic.target @1min 30.493s
                    └─sockets.target @1min 30.493s
                      └─uuidd.socket @1min 30.493s
                        └─sysinit.target @1min 30.487s
                          └─systemd-timesyncd.service @980ms +163ms
                            └─systemd-tmpfiles-setup.service @945ms +29ms
                              └─local-fs.target @934ms
                                └─home.mount @924ms +10ms
                                  └─systemd-fsck@dev-disk-by\x2duuid-3b7a5981\x>
                                    └─dev-disk-by\x2duuid-3b7a5981\x2dfb5a\x2d4>
lines 1-23


[Bernibär]

Zeig mal

Code: [Auswählen]

blkid
cat /etc/fstab

[haeremai]

Code: [Auswählen]

servus@servus-desktop ~ $ blkid
/dev/sda1: LABEL="Win7" UUID="FABAD053BAD00DCF" TYPE="ntfs" PARTUUID="81e103a5-01"
/dev/sda2: LABEL="Win7-Daten" UUID="08FFF56A6F82661B" TYPE="ntfs" PTTYPE="dos" PARTUUID="81e103a5-02"
/dev/sda5: LABEL="LMint 20" UUID="74fa46ac-d514-4331-99b4-ff3bffbd84e2" TYPE="ext4" PARTUUID="81e103a5-05"
/dev/sda6: UUID="3269bedc-7fa8-4e76-99b0-c2b6f25e246d" TYPE="swap" PARTUUID="81e103a5-06"
/dev/sda7: LABEL="LMint 20 - Home" UUID="3b7a5981-fb5a-45e3-bb25-2bcf98f09576" TYPE="ext4" PARTUUID="81e103a5-07"
/dev/sdb5: UUID="374a2833-e1a8-4da8-9b09-52df8a52a4d4" TYPE="ext4" PARTUUID="462df7c6-05"
/dev/sdb6: UUID="952014b9-6ee0-4633-846b-2f4e8c5d5976" TYPE="swap" PARTUUID="462df7c6-06"
/dev/sdb7: UUID="77d4e66b-5640-4034-9583-339bc918ae41" TYPE="ext4" PARTUUID="462df7c6-07"
/dev/sdb8: UUID="8ccf0f05-daf7-476e-8477-d213cf03820e" TYPE="ext4" PARTUUID="462df7c6-08"
/dev/sdb9: UUID="77e2d991-a4f4-4cb0-a976-c242b37e69c8" TYPE="swap" PARTUUID="462df7c6-09"
/dev/sdb10: LABEL="LinMint20.1-Home" UUID="a5f105fb-a61b-4d4f-92f3-28a761a7ea66" TYPE="ext4" PARTUUID="462df7c6-0a"
servus@servus-desktop ~ $


Code: [Auswählen]

servus@servus-desktop ~ $ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda5 during installation
UUID=74fa46ac-d514-4331-99b4-ff3bffbd84e2 /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda7 during installation
UUID=3b7a5981-fb5a-45e3-bb25-2bcf98f09576 /home           ext4    defaults        0       2
# swap was on /dev/sda6 during installation
UUID=3269bedc-7fa8-4e76-99b0-c2b6f25e246d none            swap    sw              0       0
# swap was on /dev/sdb6 during installation
UUID=6ebd7103-8cdd-4a95-806a-d70001fc9136 none            swap    sw              0       0
# swap was on /dev/sdb9 during installation
UUID=67c085e1-1b23-4276-b7ae-3ecf8834e945 none            swap    sw              0       0
servus@servus-desktop ~ $









[Bernibär]

Es ist schon irritierend drei swap Partitionen zu sehen.

Die erste swap Partition in der fstab gibt es tatsächlich auch. Die zweite und dritte kann ich nicht bei blkid wiederfinden. Am einfachsten ist die fstab mit erweiterten Rechten zu öffnen und die letzten beiden swap Partitionen mit einem "#" auszukommentieren.

[get_well(soon)]

Es ist schon irritierend drei swap Partitionen zu sehen.

Das haben wir in dem Thema auch schon angeschnitten:
https://www.linuxmintusers.de/index.php?topic=67555.0

PS: Die UUIDs haben sich seitdem auch geändert.