Benutzer

Willkommen Gast. Bitte einloggen oder registrieren. Haben Sie Ihre Aktivierungs E-Mail übersehen?
05.03.2021, 11:53:47

.
Einloggen mit Benutzername, Passwort und Sitzungslänge

Mitglieder
Statistiken
  • Beiträge insgesamt: 719935
  • Themen insgesamt: 58220
  • Heute online: 671
  • Am meisten online: 2287
  • (22.01.2020, 19:20:24)
Benutzer Online
« vorheriges nächstes »
Seiten: [1] 2   Nach unten

Autor Thema: [gelöst]  LM 20 Cinnamon- USB3 Ports inaktiv  (Gelesen 700 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

StoneageThreadstarter

  • *
[gelöst] LM 20 Cinnamon- USB3 Ports inaktiv
« am: 26.12.2020, 09:14:27 »
Hallo,

leider funktionieren bei mir die USB 3 Ports nicht.
Alles was an USB2 gehängt wird erkennt  Linux sofort, bei USB 3 passiert gar nichts. :(
Unter Windows 7 läuft alles.

MB: Gigabyte GA-970
Linux Mint 20 Cinnamon

Falls Infos fehlen bitte melden - danke! :)

« Letzte Änderung: 29.12.2020, 22:21:48 von Stoneage »
Gespeichert

nudels

Re: LM 20 Cinnamon- USB3 Ports inaktiv
« Antwort #1 am: 26.12.2020, 09:17:44 »
poste mal
Code: [Auswählen]
inxi -Fz
Gespeichert

StoneageThreadstarter

  • *
Re: LM 20 Cinnamon- USB3 Ports inaktiv
« Antwort #2 am: 26.12.2020, 10:15:43 »
Bitte sehr:

Code: [Auswählen]
~$ inxi -fz
CPU:
  Topology: Quad Core model: AMD Phenom II X4 955 bits: 64 type: MCP
  L2 cache: 2048 KiB
  Speed: 800 MHz min/max: 800/3200 MHz Core speeds (MHz): 1: 2100 2: 800
  3: 2100 4: 800
  Flags: 3dnow 3dnowext 3dnowprefetch abm apic clflush cmov cmp_legacy
  constant_tsc cpuid cr8_legacy cx16 cx8 de extapic extd_apicid fpu fxsr
  fxsr_opt ht hw_pstate ibs lahf_lm lbrv lm mca mce misalignsse mmx mmxext
  monitor msr mtrr nodeid_msr nonstop_tsc nopl npt nrip_save nx osvw pae pat
  pdpe1gb pge pni popcnt pse pse36 rdtscp rep_good sep skinit sse sse2 sse4a
  svm svm_lock syscall tsc vme vmmcall wdt
Gespeichert

tommix

Re: LM 20 Cinnamon- USB3 Ports inaktiv
« Antwort #3 am: 26.12.2020, 10:18:00 »
Immer aufpassen!
Bei Linux ist die Groß- und Kleinschreibung wichtig.
Daher
Code: [Auswählen]
inxi -Fznicht "inxi -fz"  ;D ;D ;D
Gespeichert

tommix

Re: LM 20 Cinnamon- USB3 Ports inaktiv
« Antwort #4 am: 26.12.2020, 10:22:36 »
Andere Frage: Hast du einen extra USB3 Controller eingebaut?

Zitat von: Stoneage am 26.12.2020, 10:15:43
AMD Phenom II X4 955
Denn der dürfte kein USB3 können.
Gespeichert

StoneageThreadstarter

  • *
Re: LM 20 Cinnamon- USB3 Ports inaktiv
« Antwort #5 am: 26.12.2020, 10:35:41 »
Ok, jetzt mit großem "F":

Code: [Auswählen]
System:
  Kernel: 5.4.0-58-generic x86_64 bits: 64 Desktop: Cinnamon 4.6.7
  Distro: Linux Mint 20 Ulyana
Machine:
  Type: Desktop System: Gigabyte product: N/A v: N/A serial: <filter>
  Mobo: Gigabyte model: 970A-DS3P serial: <filter> UEFI: American Megatrends
  v: FD date: 02/26/2016
CPU:
  Topology: Quad Core model: AMD Phenom II X4 955 bits: 64 type: MCP
  L2 cache: 2048 KiB
  Speed: 800 MHz min/max: 800/3200 MHz Core speeds (MHz): 1: 3200 2: 2100
  3: 2100 4: 2100
Graphics:
  Device-1: AMD Barts PRO [Radeon HD 6850] driver: radeon v: kernel
  Display: x11 server: X.Org 1.20.8 driver: ati,radeon
  unloaded: fbdev,modesetting,vesa
  resolution: 1920x1080~60Hz, 1680x1050~60Hz
  OpenGL: renderer: AMD BARTS (DRM 2.50.0 / 5.4.0-58-generic LLVM 10.0.0)
  v: 3.3 Mesa 20.0.8
Audio:
  Device-1: AMD Barts HDMI Audio [Radeon HD 6790/6850/6870 / 7720 OEM]
  driver: snd_hda_intel
  Device-2: Creative Labs Sound Core3D [Sound Blaster Recon3D / Z-Series]
  driver: snd_hda_intel
  Sound Server: ALSA v: k5.4.0-58-generic
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
  driver: r8169
  IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 3.75 TiB used: 1.59 TiB (42.4%)
  ID-1: /dev/sda vendor: Samsung model: SSD 840 EVO 120GB size: 111.79 GiB
  ID-2: /dev/sdb vendor: Samsung model: SSD 860 QVO 1TB size: 931.51 GiB
  ID-3: /dev/sdc vendor: Samsung model: SSD 870 QVO 1TB size: 931.51 GiB
  ID-4: /dev/sdd type: USB vendor: Western Digital
  model: WD My Passport 2626 size: 1.82 TiB
Partition:
  ID-1: / size: 61.72 GiB used: 9.99 GiB (16.2%) fs: ext4 dev: /dev/sda4
Sensors:
  System Temperatures: cpu: 45.1 C mobo: N/A gpu: radeon temp: 61 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 229 Uptime: 4h 11m Memory: 5.84 GiB used: 1.71 GiB (29.3%)
  Shell: bash inxi: 3.0.38
Ja, es ist ein USB3 Controller verbaut - die Bezeichnung müsste ich bei Gelegenheit mal checken...

Update: VIA USB3XP müsst es sein, oder so ähnlich.
« Letzte Änderung: 26.12.2020, 10:39:13 von Stoneage »
Gespeichert

Flash63

  • ******
Re: LM 20 Cinnamon- USB3 Ports inaktiv
« Antwort #6 am: 26.12.2020, 15:50:29 »
Zitat von: Stoneage am 26.12.2020, 10:35:41
Ja, es ist ein USB3 Controller verbaut - die Bezeichnung müsste ich bei Gelegenheit mal checken...
Update: VIA USB3XP müsst es sein, oder so ähnlich.
Hallo,
dann zuerst schauen, ob der Adapter überhaupt erkannt wird:
Code: [Auswählen]
lspci -nnk
lsusb
Gespeichert

StoneageThreadstarter

  • *
Re: LM 20 Cinnamon- USB3 Ports inaktiv
« Antwort #7 am: 26.12.2020, 17:02:23 »
Ich glaube der USB3 Controller wurde erkannt:

Code: [Auswählen]
lspci -nnk
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge [1002:5a14] (rev 02)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge [1002:5a14]
00:00.2 IOMMU [0806]: Advanced Micro Devices, Inc. [AMD/ATI] RD890S/RD990 I/O Memory Management Unit (IOMMU) [1002:5a23]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RD890S/RD990 I/O Memory Management Unit (IOMMU) [1002:5a23]
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0) [1002:5a16]
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0) [1002:5a18]
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 1) [1002:5a19]
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 4) [1002:5a1c]
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40)
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1458:b002]
Kernel driver in use: ahci
Kernel modules: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1458:5004]
Kernel driver in use: ohci-pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller [1458:5004]
Kernel driver in use: ehci-pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1458:5004]
Kernel driver in use: ohci-pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller [1458:5004]
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385]
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4, sp5100_tco
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40)
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1458:5004]
Kernel driver in use: ohci-pci
00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1458:5004]
Kernel driver in use: ohci-pci
00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
Subsystem: Gigabyte Technology Co., Ltd SB7x0/SB8x0/SB9x0 USB EHCI Controller [1458:5004]
Kernel driver in use: ehci-pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201]
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202]
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
Kernel driver in use: k10temp
Kernel modules: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204]
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Barts PRO [Radeon HD 6850] [1002:6739]
Subsystem: PC Partner Limited / Sapphire Technology Barts PRO [Radeon HD 6850] [174b:e174]
Kernel driver in use: radeon
Kernel modules: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Barts HDMI Audio [Radeon HD 6790/6850/6870 / 7720 OEM] [1002:aa88]
Subsystem: PC Partner Limited / Sapphire Technology Barts HDMI Audio [Radeon HD 6790/6850/6870 / 7720 OEM] [174b:aa88]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 USB controller [0c03]: VIA Technologies, Inc. VL805 USB 3.0 Host Controller [1106:3483] (rev 01)
Subsystem: Gigabyte Technology Co., Ltd VL805 USB 3.0 Host Controller [1458:5007]
03:00.0 Audio device [0403]: Creative Labs Sound Core3D [Sound Blaster Recon3D / Z-Series] [1102:0012] (rev 01)
Subsystem: Creative Labs SB1570 SB Audigy Fx [1102:0010]
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Subsystem: Gigabyte Technology Co., Ltd Onboard Ethernet [1458:e000]
Kernel driver in use: r8169
Kernel modules: r816
und lsusb

Code: [Auswählen]
lsusb
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 046d:c245 Logitech, Inc. G400 Optical Mouse
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 046a:0023 Cherry GmbH Keyboard
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
peter@aunet-peter:~$ ^C

Gespeichert

Flash63

  • ******
Re: LM 20 Cinnamon- USB3 Ports inaktiv
« Antwort #8 am: 26.12.2020, 17:35:49 »
Erkannt ja, es wird aber kein Treibermodul geladen. Möglicherweise ein Bug/Fehler. Was zeigt;
Code: [Auswählen]
dmesg | grep -i xhci
modprobe -c | grep -i "13d3.*3247"Teste mal folgende Bootoption:
Code: [Auswählen]
sudo sed -i 's/GRUB_CMDLINE_LINUX=""/GRUB_CMDLINE_LINUX="iommu=soft"/g' /etc/default/grub
sudo update-grubNeustart (bekanntes Problem mit dem I/O Memory Management bei AM3/4 Boards) und im BIOS/UEFI die Option "IOMMU" deaktivieren.
« Letzte Änderung: 26.12.2020, 17:38:53 von Flash63 »
Gespeichert

StoneageThreadstarter

  • *
Re: LM 20 Cinnamon- USB3 Ports inaktiv
« Antwort #9 am: 26.12.2020, 19:47:22 »
Nach Deiner Anleitung wird der Stick am USB3 Port sofort gemountet, jedoch erzeugt die externe WD MyPassport HDD jetzt einen Fehler und kann nicht gemountet werden - weder USB3 noch USB2.

IOMMU ist im BIOS deaktiviert.
Gespeichert

Flash63

  • ******
Re: LM 20 Cinnamon- USB3 Ports inaktiv
« Antwort #10 am: 26.12.2020, 19:52:35 »
Das ist ja zumindest schon mal gut (ein Fortschritt), soweit. Bitte noch die Abfragen zur Kontrolle.
Code: [Auswählen]
modprobe -c | grep -i "13d3.*3247"
lsusbDann im Terminal USB/UDEV-Monitoring aktivieren:
Code: [Auswählen]
udevadm monitorTerminalfenster geöffnet lassen und beobachten. Dann die Festplatte anschließen.  Mit Strg+C nach Ende des Vorgangs abbrechen und die Ausgabe hier zeigen.
Probeweise IOMMU im BIOS zuvor wieder aktivieren.
« Letzte Änderung: 26.12.2020, 19:57:03 von Flash63 »
Gespeichert

StoneageThreadstarter

  • *
Re: LM 20 Cinnamon- USB3 Ports inaktiv
« Antwort #11 am: 26.12.2020, 20:14:08 »
IOmmu ist aktiviert.

Hier mal der ganze Vorgang:

Code: [Auswählen]
~$ modprobe -c | grep -i "13d3.*3247"
alias usb:v13D3p3247d*dc*dsc*dp*ic*isc*ip*in* rt2800usb

~$ lsusb
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 046a:0023 Cherry GmbH Keyboard
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 002: ID 05e3:0612 Genesys Logic, Inc. Hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 008 Device 004: ID 046d:c245 Logitech, Inc. G400 Optical Mouse
Bus 008 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 008 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

~$ udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent

KERNEL[179.522105] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2 (usb)
KERNEL[179.523139] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0 (usb)
KERNEL[179.523599] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6 (scsi)
KERNEL[179.523680] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/scsi_host/host6 (scsi_host)
KERNEL[179.523748] bind     /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0 (usb)
KERNEL[179.523861] bind     /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2 (usb)
UDEV  [179.539267] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2 (usb)
UDEV  [179.544132] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0 (usb)
UDEV  [179.546329] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6 (scsi)
UDEV  [179.548224] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/scsi_host/host6 (scsi_host)
UDEV  [179.550633] bind     /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0 (usb)
UDEV  [179.557132] bind     /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2 (usb)
KERNEL[180.531226] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0 (scsi)
KERNEL[180.531313] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0 (scsi)
KERNEL[180.531406] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0/scsi_device/6:0:0:0 (scsi_device)
KERNEL[180.532059] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0/scsi_disk/6:0:0:0 (scsi_disk)
KERNEL[180.532207] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0/scsi_generic/sg3 (scsi_generic)
KERNEL[180.532320] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0/bsg/6:0:0:0 (bsg)
KERNEL[180.532396] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:1 (scsi)
KERNEL[180.532473] bind     /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:1 (scsi)
KERNEL[180.532519] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:1/scsi_device/6:0:0:1 (scsi_device)
KERNEL[180.532632] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:1/scsi_generic/sg4 (scsi_generic)
UDEV  [180.536776] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0 (scsi)
UDEV  [180.540665] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:1 (scsi)
UDEV  [180.541447] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0 (scsi)
UDEV  [180.542255] bind     /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:1 (scsi)
UDEV  [180.543724] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0/scsi_device/6:0:0:0 (scsi_device)
UDEV  [180.544465] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:1/scsi_device/6:0:0:1 (scsi_device)
UDEV  [180.545493] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0/scsi_disk/6:0:0:0 (scsi_disk)
UDEV  [180.547017] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0/scsi_generic/sg3 (scsi_generic)
UDEV  [180.547733] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:1/scsi_generic/sg4 (scsi_generic)
UDEV  [180.549256] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0/bsg/6:0:0:0 (bsg)
KERNEL[188.096192] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:1/bsg/6:0:0:1 (bsg)
UDEV  [188.105085] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:1/bsg/6:0:0:1 (bsg)
KERNEL[188.124801] add      /devices/virtual/bdi/8:48 (bdi)
UDEV  [188.127672] add      /devices/virtual/bdi/8:48 (bdi)
KERNEL[188.167322] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0/block/sdd (block)
KERNEL[188.167365] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0/block/sdd/sdd1 (block)
KERNEL[188.168872] bind     /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0 (scsi)
UDEV  [188.318725] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0/block/sdd (block)
UDEV  [188.462501] add      /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0/block/sdd/sdd1 (block)
UDEV  [188.464607] bind     /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0 (scsi)
KERNEL[188.601610] change   /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0/block/sdd/sdd1 (block)
UDEV  [188.612127] change   /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb9/9-1/9-1.2/9-1.2:1.0/host6/target6:0:0/6:0:0:0/block/sdd/sdd1 (b
Gespeichert

Flash63

  • ******
Re: LM 20 Cinnamon- USB3 Ports inaktiv
« Antwort #12 am: 26.12.2020, 20:25:59 »
Da fehlt noch etwas bei der Ausgabe, für mich sieht es jetzt aber so aus, als würde die Platte wieder als sdd1 gemounted, oder doch nicht? Auch wieder an USB 2.x testen.
USB 3.0 ist jetzt aber vorhanden, nur ein WLAN-USB-Treiber (rt2800usb) wurde zugewiesen. Das kann nicht korrekt sein. Diesen mal sperren:
Code: [Auswählen]
echo "blacklist rt2800usb" | sudo tee /etc/modprobe.d/blacklist_rt2800usb.conf
Gespeichert

StoneageThreadstarter

  • *
Re: LM 20 Cinnamon- USB3 Ports inaktiv
« Antwort #13 am: 26.12.2020, 20:49:21 »
WLAN USB-Treiber wurde gesperrt und die Platte nochmal am USB2 Port angeschlossen - leider wieder fehlgeschlagen.

Code: [Auswählen]
~$ echo "blacklist rt2800usb" | sudo tee /etc/modprobe.d/blacklist_rt2800usb.conf       
blacklist rt2800usb

~$ udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent

KERNEL[2236.978254] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4 (usb)
KERNEL[2236.978749] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0 (usb)
KERNEL[2236.983707] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6 (scsi)
KERNEL[2236.983773] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/scsi_host/host6 (scsi_host)
KERNEL[2236.983844] bind     /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0 (usb)
KERNEL[2236.984086] bind     /devices/pci0000:00/0000:00:16.2/usb3/3-4 (usb)
UDEV  [2236.992228] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4 (usb)
UDEV  [2236.995384] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0 (usb)
UDEV  [2236.997178] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6 (scsi)
UDEV  [2236.998787] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/scsi_host/host6 (scsi_host)
UDEV  [2237.000677] bind     /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0 (usb)
UDEV  [2237.011624] bind     /devices/pci0000:00/0000:00:16.2/usb3/3-4 (usb)
KERNEL[2238.005467] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0 (scsi)
KERNEL[2238.005550] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0 (scsi)
KERNEL[2238.005625] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0/scsi_device/6:0:0:0 (scsi_device)
KERNEL[2238.005790] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0/scsi_disk/6:0:0:0 (scsi_disk)
KERNEL[2238.005940] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0/scsi_generic/sg3 (scsi_generic)
KERNEL[2238.006070] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0/bsg/6:0:0:0 (bsg)
KERNEL[2238.006148] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:1 (scsi)
KERNEL[2238.006224] bind     /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:1 (scsi)
KERNEL[2238.006313] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:1/scsi_device/6:0:0:1 (scsi_device)
KERNEL[2238.006387] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:1/scsi_generic/sg4 (scsi_generic)
UDEV  [2238.010588] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0 (scsi)
UDEV  [2238.012738] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0 (scsi)
UDEV  [2238.015766] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0/scsi_device/6:0:0:0 (scsi_device)
UDEV  [2238.016276] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0/scsi_disk/6:0:0:0 (scsi_disk)
UDEV  [2238.016987] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0/scsi_generic/sg3 (scsi_generic)
UDEV  [2238.018345] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:1 (scsi)
UDEV  [2238.019050] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0/bsg/6:0:0:0 (bsg)
UDEV  [2238.020350] bind     /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:1 (scsi)
UDEV  [2238.022226] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:1/scsi_device/6:0:0:1 (scsi_device)
UDEV  [2238.022797] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:1/scsi_generic/sg4 (scsi_generic)
KERNEL[2240.892036] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:1/bsg/6:0:0:1 (bsg)
UDEV  [2240.897696] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:1/bsg/6:0:0:1 (bsg)
KERNEL[2241.920823] add      /devices/virtual/bdi/8:48 (bdi)
UDEV  [2241.924066] add      /devices/virtual/bdi/8:48 (bdi)
KERNEL[2242.053873] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0/block/sdd (block)
KERNEL[2242.053911] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0/block/sdd/sdd1 (block)
KERNEL[2242.057442] bind     /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0 (scsi)
UDEV  [2242.174997] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0/block/sdd (block)
UDEV  [2242.340259] add      /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0/block/sdd/sdd1 (block)
UDEV  [2242.344147] bind     /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0 (scsi)
KERNEL[2242.531193] change   /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0/block/sdd/sdd1 (block)
UDEV  [2242.581013] change   /devices/pci0000:00/0000:00:16.2/usb3/3-4/3-4:1.0/host6/target6:0:0/6:0:0:0/block/sdd/sdd1 (block)
Gespeichert

Flash63

  • ******
Re: LM 20 Cinnamon- USB3 Ports inaktiv
« Antwort #14 am: 26.12.2020, 21:06:17 »
Unter Win 7 funktioniert die Platte? Wenn ja, mal über den Dateimanager prüfen/reparieren lassen und dann wieder unter Linux probieren.
« Letzte Änderung: 26.12.2020, 21:11:10 von Flash63 »
Gespeichert
Seiten: [1] 2   Nach oben
« vorheriges nächstes »