Willkommen Gast. Bitte einloggen oder registrieren. Haben Sie Ihre Aktivierungs E-Mail übersehen?
30.10.2020, 00:16:21

.
Einloggen mit Benutzername, Passwort und Sitzungslänge

Mitglieder
Statistiken
  • Beiträge insgesamt: 691577
  • Themen insgesamt: 55984
  • Heute online: 450
  • Am meisten online: 2287
  • (22.01.2020, 19:20:24)
Benutzer Online
Mitglieder: 7
Gäste: 422
Gesamt: 429

Autor Thema:  Scanner beim Netzwerkdrucker Samsung M-267x  (Gelesen 1118 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

Re: Scanner beim Netzwerkdrucker Samsung M-267x
« Antwort #15 am: 29.09.2020, 12:22:30 »
Hast du das aus Antwort #11 berücksichtigt...?
Korrektur:
sudo apt-get install libusb-0.1-4
« Letzte Änderung: 29.09.2020, 12:37:02 von Wolfgang58 »

Kellerkind_2009

  • Gast
Re: Scanner beim Netzwerkdrucker Samsung M-267x
« Antwort #16 am: 29.09.2020, 22:09:46 »
Der Samsung läuft jetzt nicht mit dem smfp Treiber,sondern mit dem xerox_mfp Treiber.Der ist nur als Test von mir zu Verstehen gewesen.

Sane Funktioniert demnach -- also bleibt die Installation des Samsung Paketes als Fehlerquelle. Zeige mal locate smfpnetdiscovery
Was hast du gewählt bei der Frage If you want to configure firewall automatically, enter 'y' or just press 'Enter'. To skip, enter 'n'. : ?

Gruß Stephan

Re: Scanner beim Netzwerkdrucker Samsung M-267x
« Antwort #17 am: 30.09.2020, 15:13:14 »
Zeige mal locate smfpnetdiscovery
locate smfpnetdiscovery
/home/joh/.local/share/Trash/files/home/joh/install/uld/i386/smfpnetdiscovery
/home/joh/.local/share/Trash/files/home/joh/install/uld/x86_64/smfpnetdiscovery
/home/joh/.local/share/Trash/files/uld/i386/smfpnetdiscovery
/home/joh/.local/share/Trash/files/uld/x86_64/smfpnetdiscovery
/home/joh/.local/share/Trash/files/uld.2/i386/smfpnetdiscovery
/home/joh/.local/share/Trash/files/uld.2/x86_64/smfpnetdiscovery
/home/joh/SOFT/lin/Samsung-Fax/uld/i386/smfpnetdiscovery
/home/joh/SOFT/lin/Samsung-Fax/uld/x86_64/smfpnetdiscovery
/home/joh/SOFT/lin/uld_20171125/armv4/smfpnetdiscovery
/home/joh/SOFT/lin/uld_20171125/i386/smfpnetdiscovery
/home/joh/SOFT/lin/uld_20171125/x86_64/smfpnetdiscovery
/home/joh/uld/i386/smfpnetdiscovery
/home/joh/uld/x86_64/smfpnetdiscovery
/opt/smfp-common/printer/bin/smfpnetdiscovery
/timeshift/snapshots/2020-09-25_23-00-01/localhost/opt/smfp-common/printer/bin/smfpnetdiscovery
/timeshift/snapshots/2020-09-25_23-00-01/localhost/usr/lib/cups/backend/smfpnetdiscovery
/usr/lib/cups/backend/smfpnetdiscovery

Was hast du gewählt bei der Frage If you want to configure firewall automatically, enter 'y' or just press 'Enter'. To skip, enter 'n'. : ?
Das kann ich leider nicht mehr sicher beantworten. Was wäre denn die sicherere Auswahl?

Re: Scanner beim Netzwerkdrucker Samsung M-267x
« Antwort #18 am: 30.09.2020, 21:17:19 »
sudo apt-get install libusb-0.1-4
ja, libusb-0.1-4 ist installiert

Kellerkind_2009

  • Gast
Re: Scanner beim Netzwerkdrucker Samsung M-267x
« Antwort #19 am: 30.09.2020, 23:20:52 »
Die Eingabe wäre y und Enter oder einfach nur Enter.Deinstalliere den Samsung nochmal (uninstall.sh) und Installiere ihn wieder.

Eigentlich sind die Samsung problemlos -- hmmmm. Falls wieder scheitert unbeding mal an USB Port Testen --damit wir den Kreis mal enger machen  ;D

Gruß Stephan

Re: Scanner beim Netzwerkdrucker Samsung M-267x
« Antwort #20 am: 03.10.2020, 09:09:22 »
unbeding mal an USB Port Testen --damit wir den Kreis mal enger machen
Jubel 1/2   per USB kann ich jetzt mit gscan2pdf wieder normal scannen
BTW: aber auch vor Anstecken des USB Kabels (3x verlängert quer durch die Bude, was sagt die Berufsgenossenschaft :)
hat er bei Änderungen am USB seltsamerweise immer per TCP den Samsung aufgeweckt

Kellerkind_2009

  • Gast
Re: Scanner beim Netzwerkdrucker Samsung M-267x
« Antwort #21 am: 03.10.2020, 12:08:09 »
Bei mir war die Berufsgenossenschaft noch nicht  :P

Ok,den Sammsung von USB abklemmen und einschalten export SANE_DEBUG_DLL=255 && scanimage -L
avahi-browse -rt _ipp._tcp
id
Gruß Stephan

Re: Scanner beim Netzwerkdrucker Samsung M-267x
« Antwort #22 am: 05.10.2020, 22:48:34 »
export SANE_DEBUG_DLL=255 && scanimage -L
[22:43:16.287729] [sanei_debug] Setting debug level of dll to 255.
[22:43:16.288061] [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.29
[22:43:16.288225] [dll] sane_init/read_dlld: attempting to open directory `./dll.d'
[22:43:16.288415] [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d'
[22:43:16.288580] [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d'
[22:43:16.288753] [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip
[22:43:16.288923] [dll] sane_init/read_config: reading dll.d/hplip
[22:43:16.289095] [dll] add_backend: adding backend `hpaio'
[22:43:16.289258] [dll] sane_init/read_dlld: done.
[22:43:16.289424] [dll] sane_init/read_config: reading dll.conf
[22:43:16.289588] [dll] add_backend: adding backend `net'
[22:43:16.289743] [dll] add_backend: adding backend `abaton'
[22:43:16.289897] [dll] add_backend: adding backend `agfafocus'
[22:43:16.290052] [dll] add_backend: adding backend `apple'
[22:43:16.290205] [dll] add_backend: adding backend `artec'
[22:43:16.290359] [dll] add_backend: adding backend `artec_eplus48u'
[22:43:16.290527] [dll] add_backend: adding backend `as6e'
[22:43:16.290681] [dll] add_backend: adding backend `avision'
[22:43:16.290835] [dll] add_backend: adding backend `bh'
[22:43:16.290990] [dll] add_backend: adding backend `canon'
[22:43:16.291176] [dll] add_backend: adding backend `canon630u'
[22:43:16.291334] [dll] add_backend: adding backend `canon_dr'
[22:43:16.291488] [dll] add_backend: adding backend `cardscan'
[22:43:16.291642] [dll] add_backend: adding backend `coolscan'
[22:43:16.291796] [dll] add_backend: adding backend `coolscan3'
[22:43:16.291962] [dll] add_backend: adding backend `dell1600n_net'
[22:43:16.292119] [dll] add_backend: adding backend `dmc'
[22:43:16.292273] [dll] add_backend: adding backend `epjitsu'
[22:43:16.292426] [dll] add_backend: adding backend `epson2'
[22:43:16.292578] [dll] add_backend: adding backend `epsonds'
[22:43:16.292731] [dll] add_backend: adding backend `escl'
[22:43:16.292883] [dll] add_backend: adding backend `fujitsu'
[22:43:16.293036] [dll] add_backend: adding backend `genesys'
[22:43:16.293190] [dll] add_backend: adding backend `gt68xx'
[22:43:16.293345] [dll] add_backend: adding backend `hp'
[22:43:16.293498] [dll] add_backend: adding backend `hp3500'
[22:43:16.293650] [dll] add_backend: adding backend `hp3900'
[22:43:16.293817] [dll] add_backend: adding backend `hp4200'
[22:43:16.293971] [dll] add_backend: adding backend `hp5400'
[22:43:16.294124] [dll] add_backend: adding backend `hp5590'
[22:43:16.294277] [dll] add_backend: adding backend `hpljm1005'
[22:43:16.294439] [dll] add_backend: adding backend `hpsj5s'
[22:43:16.294609] [dll] add_backend: adding backend `hs2p'
[22:43:16.294801] [dll] add_backend: adding backend `ibm'
[22:43:16.294895] [dll] add_backend: adding backend `kodak'
[22:43:16.294935] [dll] add_backend: adding backend `kodakaio'
[22:43:16.295023] [dll] add_backend: adding backend `kvs1025'
[22:43:16.295099] [dll] add_backend: adding backend `kvs20xx'
[22:43:16.295189] [dll] add_backend: adding backend `kvs40xx'
[22:43:16.295222] [dll] add_backend: adding backend `leo'
[22:43:16.295298] [dll] add_backend: adding backend `lexmark'
[22:43:16.295371] [dll] add_backend: adding backend `ma1509'
[22:43:16.295406] [dll] add_backend: adding backend `magicolor'
[22:43:16.295482] [dll] add_backend: adding backend `matsushita'
[22:43:16.295515] [dll] add_backend: adding backend `microtek'
[22:43:16.295589] [dll] add_backend: adding backend `microtek2'
[22:43:16.295665] [dll] add_backend: adding backend `mustek'
[22:43:16.295698] [dll] add_backend: adding backend `mustek_usb'
[22:43:16.295772] [dll] add_backend: adding backend `mustek_usb2'
[22:43:16.295804] [dll] add_backend: adding backend `nec'
[22:43:16.295878] [dll] add_backend: adding backend `niash'
[22:43:16.295951] [dll] add_backend: adding backend `pie'
[22:43:16.295986] [dll] add_backend: adding backend `pieusb'
[22:43:16.296060] [dll] add_backend: adding backend `pint'
[22:43:16.296092] [dll] add_backend: adding backend `pixma'
[22:43:16.296166] [dll] add_backend: adding backend `plustek'
[22:43:16.296238] [dll] add_backend: adding backend `qcam'
[22:43:16.296274] [dll] add_backend: adding backend `ricoh'
[22:43:16.296349] [dll] add_backend: adding backend `ricoh2'
[22:43:16.296385] [dll] add_backend: adding backend `rts8891'
[22:43:16.296465] [dll] add_backend: adding backend `s9036'
[22:43:16.296536] [dll] add_backend: adding backend `sceptre'
[22:43:16.296571] [dll] add_backend: adding backend `sharp'
[22:43:16.296645] [dll] add_backend: adding backend `sm3600'
[22:43:16.296677] [dll] add_backend: adding backend `sm3840'
[22:43:16.296751] [dll] add_backend: adding backend `snapscan'
[22:43:16.296823] [dll] add_backend: adding backend `sp15c'
[22:43:16.296859] [dll] add_backend: adding backend `tamarack'
[22:43:16.296933] [dll] add_backend: adding backend `teco1'
[22:43:16.296967] [dll] add_backend: adding backend `teco2'
[22:43:16.297041] [dll] add_backend: adding backend `teco3'
[22:43:16.297116] [dll] add_backend: adding backend `u12'
[22:43:16.297148] [dll] add_backend: adding backend `umax'
[22:43:16.297223] [dll] add_backend: adding backend `umax1220u'
[22:43:16.297256] [dll] add_backend: adding backend `v4l'
[22:43:16.297332] [dll] add_backend: adding backend `xerox_mfp'
[22:43:16.297407] [dll] add_backend: adding backend `smfp'
[22:43:16.297490] [dll] sane_get_devices
[22:43:16.297608] [dll] load: searching backend `smfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:16.297685] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-smfp.so.1'
[22:43:16.297776] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-smfp.so.1'
[22:43:16.302801] [dll] init: initializing backend `smfp'
[22:43:16.312613] [dll] init: backend `smfp' is version 1.0.1
[22:43:17.719935] [dll] load: searching backend `xerox_mfp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:17.720009] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[22:43:17.720059] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-xerox_mfp.so.1'
[22:43:17.720375] [dll] init: initializing backend `xerox_mfp'
[22:43:17.741685] [dll] init: backend `xerox_mfp' is version 1.0.13
[22:43:18.759259] [dll] load: searching backend `v4l' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.759333] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1'
[22:43:18.759381] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-v4l.so.1' (No such file or directory)
[22:43:18.759419] [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1'
[22:43:18.759635] [dll] load: couldn't open `/usr/lib/sane/libsane-v4l.so.1' (No such file or directory)
[22:43:18.759759] [dll] load: trying to load `/usr/lib64/sane/libsane-v4l.so.1'
[22:43:18.759842] [dll] load: couldn't open `/usr/lib64/sane/libsane-v4l.so.1' (No such file or directory)
[22:43:18.759919] [dll] load: couldn't find backend `v4l' (No such file or directory)
[22:43:18.759954] [dll] load: searching backend `umax1220u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.760031] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[22:43:18.760124] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax1220u.so.1'
[22:43:18.760465] [dll] init: initializing backend `umax1220u'
[22:43:18.768856] [dll] init: backend `umax1220u' is version 1.0.2
[22:43:18.776501] [dll] load: searching backend `umax' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.776732] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[22:43:18.776970] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-umax.so.1'
[22:43:18.777865] [dll] init: initializing backend `umax'
[22:43:18.822052] [dll] init: backend `umax' is version 1.0.45
[22:43:18.822389] [dll] load: searching backend `u12' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.822628] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[22:43:18.822889] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-u12.so.1'
[22:43:18.823555] [dll] init: initializing backend `u12'
[22:43:18.844380] [dll] init: backend `u12' is version 1.0.0
[22:43:18.847328] [dll] load: searching backend `teco3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.847515] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[22:43:18.847700] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco3.so.1'
[22:43:18.848062] [dll] init: initializing backend `teco3'
[22:43:18.855537] [dll] init: backend `teco3' is version 1.0.1
[22:43:18.859333] [dll] load: searching backend `teco2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.859531] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[22:43:18.859863] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco2.so.1'
[22:43:18.860313] [dll] init: initializing backend `teco2'
[22:43:18.863376] [dll] init: backend `teco2' is version 1.0.10
[22:43:18.867473] [dll] load: searching backend `teco1' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.867757] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[22:43:18.868039] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-teco1.so.1'
[22:43:18.868537] [dll] init: initializing backend `teco1'
[22:43:18.870964] [dll] init: backend `teco1' is version 1.0.10
[22:43:18.871275] [dll] load: searching backend `tamarack' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.871445] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[22:43:18.871620] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-tamarack.so.1'
[22:43:18.872013] [dll] init: initializing backend `tamarack'
[22:43:18.872877] [dll] init: backend `tamarack' is version 1.0.0
[22:43:18.875440] [dll] load: searching backend `sp15c' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.875621] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[22:43:18.875807] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sp15c.so.1'
[22:43:18.876180] [dll] init: initializing backend `sp15c'
[22:43:18.876731] [dll] init: backend `sp15c' is version 1.0.0
[22:43:18.876927] [dll] load: searching backend `snapscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.877090] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[22:43:18.877259] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-snapscan.so.1'
[22:43:18.877667] [dll] init: initializing backend `snapscan'
[22:43:18.895734] [dll] init: backend `snapscan' is version 1.4.53
[22:43:18.896031] [dll] load: searching backend `sm3840' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.896197] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[22:43:18.896370] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3840.so.1'
[22:43:18.896879] [dll] init: initializing backend `sm3840'
[22:43:18.906843] [dll] init: backend `sm3840' is version 1.0.0
[22:43:18.907249] [dll] load: searching backend `sm3600' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.907417] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[22:43:18.907590] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sm3600.so.1'
[22:43:18.908065] [dll] init: initializing backend `sm3600'
[22:43:18.929798] [dll] init: backend `sm3600' is version 1.0.6
[22:43:18.930065] [dll] load: searching backend `sharp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.930280] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[22:43:18.930477] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sharp.so.1'
[22:43:18.930920] [dll] init: initializing backend `sharp'
[22:43:18.931955] [dll] init: backend `sharp' is version 1.0.0
[22:43:18.932165] [dll] load: searching backend `sceptre' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.932349] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[22:43:18.932575] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-sceptre.so.1'
[22:43:18.932914] [dll] init: initializing backend `sceptre'
[22:43:18.934166] [dll] init: backend `sceptre' is version 1.0.10
[22:43:18.934379] [dll] load: searching backend `s9036' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.934570] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[22:43:18.934765] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-s9036.so.1'
[22:43:18.936833] [dll] init: initializing backend `s9036'
[22:43:18.937803] [dll] init: backend `s9036' is version 1.0.0
[22:43:18.938000] [dll] load: searching backend `rts8891' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.938182] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[22:43:18.938379] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-rts8891.so.1'
[22:43:18.938827] [dll] init: initializing backend `rts8891'
[22:43:18.957845] [dll] init: backend `rts8891' is version 1.0.2401
[22:43:18.958309] [dll] load: searching backend `ricoh2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.958476] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[22:43:18.958652] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh2.so.1'
[22:43:18.959099] [dll] init: initializing backend `ricoh2'
[22:43:18.968513] [dll] init: backend `ricoh2' is version 1.0.0
[22:43:18.968742] [dll] load: searching backend `ricoh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.968906] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[22:43:18.969080] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ricoh.so.1'
[22:43:18.969486] [dll] init: initializing backend `ricoh'
[22:43:18.970131] [dll] init: backend `ricoh' is version 1.0.0
[22:43:18.970314] [dll] load: searching backend `qcam' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.970489] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[22:43:18.970663] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-qcam.so.1'
[22:43:18.970975] [dll] init: initializing backend `qcam'
[22:43:18.971209] [dll] init: backend `qcam' is version 1.0.0
[22:43:18.971373] [dll] load: searching backend `plustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.971536] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[22:43:18.971702] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-plustek.so.1'
[22:43:18.972078] [dll] init: initializing backend `plustek'
[22:43:18.993605] [dll] init: backend `plustek' is version 1.0.0
[22:43:18.993927] [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:18.994156] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[22:43:18.994801] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1'
[22:43:18.995735] [dll] init: initializing backend `pixma'
[22:43:19.009345] [dll] init: backend `pixma' is version 1.0.27
[22:43:19.532281] [dll] load: searching backend `pint' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:19.532546] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1'
[22:43:19.532644] [dll] load: couldn't open `/usr/lib/x86_64-linux-gnu/sane/libsane-pint.so.1' (No such file or directory)
[22:43:19.532723] [dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1'
[22:43:19.532890] [dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory)
[22:43:19.532967] [dll] load: trying to load `/usr/lib64/sane/libsane-pint.so.1'
[22:43:19.533048] [dll] load: couldn't open `/usr/lib64/sane/libsane-pint.so.1' (No such file or directory)
[22:43:19.533081] [dll] load: couldn't find backend `pint' (No such file or directory)
[22:43:19.533163] [dll] load: searching backend `pieusb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:19.533197] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[22:43:19.533286] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pieusb.so.1'
[22:43:19.533721] [dll] init: initializing backend `pieusb'
[22:43:19.553114] [dll] init: backend `pieusb' is version 1.0.1
[22:43:19.560962] [dll] load: searching backend `pie' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:19.561209] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[22:43:19.561456] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pie.so.1'
[22:43:19.562009] [dll] init: initializing backend `pie'
[22:43:19.565834] [dll] init: backend `pie' is version 1.0.9
[22:43:19.566081] [dll] load: searching backend `niash' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:19.566302] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[22:43:19.566532] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-niash.so.1'
[22:43:19.567365] [dll] init: initializing backend `niash'
[22:43:19.587930] [dll] init: backend `niash' is version 1.0.1
[22:43:19.588170] [dll] load: searching backend `nec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:19.593398] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[22:43:19.595579] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-nec.so.1'
[22:43:19.596021] [dll] init: initializing backend `nec'
[22:43:19.596816] [dll] init: backend `nec' is version 1.0.0
[22:43:19.596980] [dll] load: searching backend `mustek_usb2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:19.597138] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[22:43:19.597306] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb2.so.1'
[22:43:19.597674] [dll] init: initializing backend `mustek_usb2'
[22:43:19.597858] [dll] init: backend `mustek_usb2' is version 1.0.10
[22:43:19.618388] [dll] load: searching backend `mustek_usb' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:19.618630] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[22:43:19.618802] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek_usb.so.1'
[22:43:19.619296] [dll] init: initializing backend `mustek_usb'
[22:43:19.642136] [dll] init: backend `mustek_usb' is version 1.0.18
[22:43:19.642181] [dll] load: searching backend `mustek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:19.642214] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[22:43:19.642248] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-mustek.so.1'
[22:43:19.642698] [dll] init: initializing backend `mustek'
[22:43:19.644187] [dll] init: backend `mustek' is version 1.0.138
[22:43:19.644215] [dll] load: searching backend `microtek2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:19.644241] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[22:43:19.644274] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek2.so.1'
[22:43:19.644470] [dll] init: initializing backend `microtek2'
[22:43:19.645468] [dll] init: backend `microtek2' is version 1.0.0
[22:43:19.645511] [dll] load: searching backend `microtek' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:19.645542] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[22:43:19.645575] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-microtek.so.1'
[22:43:19.645770] [dll] init: initializing backend `microtek'
[22:43:19.646631] [dll] init: backend `microtek' is version 1.0.0
[22:43:19.646658] [dll] load: searching backend `matsushita' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:19.646688] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[22:43:19.646719] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-matsushita.so.1'
[22:43:19.646888] [dll] init: initializing backend `matsushita'
[22:43:19.657885] [dll] init: backend `matsushita' is version 1.0.7
[22:43:19.657932] [dll] load: searching backend `magicolor' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:19.657985] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[22:43:19.658043] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-magicolor.so.1'
[22:43:19.659812] [dll] init: initializing backend `magicolor'
[22:43:19.686466] [dll] init: backend `magicolor' is version 1.0.1
[22:43:21.191166] [dll] load: searching backend `ma1509' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:21.191238] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[22:43:21.191297] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ma1509.so.1'
[22:43:21.191687] [dll] init: initializing backend `ma1509'
[22:43:21.201332] [dll] init: backend `ma1509' is version 1.0.3
[22:43:21.204434] [dll] load: searching backend `lexmark' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:21.204523] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[22:43:21.204605] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-lexmark.so.1'
[22:43:21.205047] [dll] init: initializing backend `lexmark'
[22:43:21.245750] [dll] init: backend `lexmark' is version 1.0.32
[22:43:21.245952] [dll] load: searching backend `leo' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:21.245975] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[22:43:21.246047] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-leo.so.1'
[22:43:21.246352] [dll] init: initializing backend `leo'
[22:43:21.247499] [dll] init: backend `leo' is version 1.0.11
[22:43:21.247536] [dll] load: searching backend `kvs40xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:21.247598] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[22:43:21.247650] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs40xx.so.1'
[22:43:21.248000] [dll] init: initializing backend `kvs40xx'
[22:43:21.269887] [dll] init: backend `kvs40xx' is version 1.0.1
[22:43:21.270681] [dll] load: searching backend `kvs20xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:21.270731] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[22:43:21.270794] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs20xx.so.1'
[22:43:21.271200] [dll] init: initializing backend `kvs20xx'
[22:43:21.287029] [dll] init: backend `kvs20xx' is version 1.0.2
[22:43:21.288475] [dll] load: searching backend `kvs1025' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:21.288555] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[22:43:21.288606] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kvs1025.so.1'
[22:43:21.289023] [dll] init: initializing backend `kvs1025'
[22:43:21.306440] [dll] init: backend `kvs1025' is version 1.0.5
[22:43:21.309959] [dll] load: searching backend `kodakaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:21.310054] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[22:43:21.310128] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodakaio.so.1'
[22:43:21.326126] [dll] init: initializing backend `kodakaio'
[22:43:21.336883] [dll] init: backend `kodakaio' is version 1.0.3
[22:43:23.203657] [dll] load: searching backend `kodak' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:23.203742] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[22:43:23.203808] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-kodak.so.1'
[22:43:23.204075] [dll] init: initializing backend `kodak'
[22:43:23.204100] [dll] init: backend `kodak' is version 1.0.7
[22:43:23.204413] [dll] load: searching backend `ibm' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:23.204433] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[22:43:23.204457] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-ibm.so.1'
[22:43:23.204596] [dll] init: initializing backend `ibm'
[22:43:23.205033] [dll] init: backend `ibm' is version 1.0.0
[22:43:23.205051] [dll] load: searching backend `hs2p' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:23.205068] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[22:43:23.205092] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hs2p.so.1'
[22:43:23.205227] [dll] init: initializing backend `hs2p'
[22:43:23.205848] [dll] init: backend `hs2p' is version 1.0.0
[22:43:23.205867] [dll] load: searching backend `hpsj5s' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:23.205921] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[22:43:23.205971] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpsj5s.so.1'
[22:43:23.206145] [dll] init: initializing backend `hpsj5s'
[22:43:23.206208] [dll] init: backend `hpsj5s' is version 1.0.3
[22:43:23.206236] [dll] load: searching backend `hpljm1005' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:23.206292] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[22:43:23.206345] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpljm1005.so.1'
[22:43:23.206541] [dll] init: initializing backend `hpljm1005'
[22:43:23.214703] [dll] init: backend `hpljm1005' is version 1.0.1
[22:43:23.214747] [dll] load: searching backend `hp5590' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:23.214772] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[22:43:23.214799] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5590.so.1'
[22:43:23.215145] [dll] init: initializing backend `hp5590'
[22:43:23.239055] [dll] init: backend `hp5590' is version 1.0.8
[22:43:23.239201] [dll] load: searching backend `hp5400' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:23.239238] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[22:43:23.239286] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp5400.so.1'
[22:43:23.239736] [dll] init: initializing backend `hp5400'
[22:43:23.251802] [dll] init: backend `hp5400' is version 1.0.3
[22:43:23.251895] [dll] load: searching backend `hp4200' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:23.251971] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[22:43:23.252028] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp4200.so.1'
[22:43:23.252496] [dll] init: initializing backend `hp4200'
[22:43:23.290359] [dll] init: backend `hp4200' is version 1.0.0
[22:43:23.290424] [dll] load: searching backend `hp3900' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:23.290463] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[22:43:23.290508] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3900.so.1'
[22:43:23.291501] [dll] init: initializing backend `hp3900'
[22:43:23.306757] [dll] init: backend `hp3900' is version 1.0.0
[22:43:23.307425] [dll] load: searching backend `hp3500' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:23.307663] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[22:43:23.307911] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp3500.so.1'
[22:43:23.308500] [dll] init: initializing backend `hp3500'
[22:43:23.319064] [dll] init: backend `hp3500' is version 1.0.0
[22:43:23.319381] [dll] load: searching backend `hp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:23.319544] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[22:43:23.319716] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hp.so.1'
[22:43:23.320280] [dll] init: initializing backend `hp'
[22:43:23.320472] [dll] init: backend `hp' is version 1.0.8
[22:43:23.337340] [dll] load: searching backend `gt68xx' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:23.337654] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[22:43:23.337854] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-gt68xx.so.1'
[22:43:23.338662] [dll] init: initializing backend `gt68xx'
[22:43:23.355895] [dll] init: backend `gt68xx' is version 1.0.84
[22:43:23.356353] [dll] load: searching backend `genesys' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:23.356567] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[22:43:23.356776] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-genesys.so.1'
[22:43:23.357771] [dll] init: initializing backend `genesys'
[22:43:23.374994] [dll] init: backend `genesys' is version 1.0.0
[22:43:23.375569] [dll] load: searching backend `fujitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:23.375801] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[22:43:23.376010] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-fujitsu.so.1'
[22:43:23.376593] [dll] init: initializing backend `fujitsu'
[22:43:23.377351] [dll] init: backend `fujitsu' is version 1.0.134
[22:43:23.388392] [dll] load: searching backend `escl' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:23.388665] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[22:43:23.388857] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-escl.so.1'
[22:43:23.411770] [dll] init: initializing backend `escl'
[22:43:23.412184] [dll] init: backend `escl' is version 1.0.0
[22:43:24.438526] [dll] load: searching backend `epsonds' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:24.438577] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[22:43:24.438608] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epsonds.so.1'
[22:43:24.438995] [dll] init: initializing backend `epsonds'
[22:43:24.451164] [dll] init: backend `epsonds' is version 1.0.0
[22:43:24.451608] [dll] load: searching backend `epson2' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:24.451843] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[22:43:24.452077] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epson2.so.1'
[22:43:24.452748] [dll] init: initializing backend `epson2'
[22:43:24.487452] [dll] init: backend `epson2' is version 1.0.124
[22:43:25.489492] [dll] load: searching backend `epjitsu' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:25.489550] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[22:43:25.489587] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-epjitsu.so.1'
[22:43:25.489987] [dll] init: initializing backend `epjitsu'
[22:43:25.490018] [dll] init: backend `epjitsu' is version 1.0.31
[22:43:25.507622] [dll] load: searching backend `dmc' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:25.507697] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[22:43:25.507754] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dmc.so.1'
[22:43:25.508088] [dll] init: initializing backend `dmc'
[22:43:25.508864] [dll] init: backend `dmc' is version 1.0.0
[22:43:25.508927] [dll] load: searching backend `dell1600n_net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:25.508976] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[22:43:25.509032] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-dell1600n_net.so.1'
[22:43:25.509426] [dll] init: initializing backend `dell1600n_net'
[22:43:25.509481] [dll] init: backend `dell1600n_net' is version 1.0.0
[22:43:25.810041] [dll] load: searching backend `coolscan3' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:25.810121] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[22:43:25.810170] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan3.so.1'
[22:43:25.810626] [dll] init: initializing backend `coolscan3'
[22:43:25.820334] [dll] init: backend `coolscan3' is version 1.0.0
[22:43:25.820780] [dll] load: searching backend `coolscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:25.820803] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[22:43:25.820831] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-coolscan.so.1'
[22:43:25.821302] [dll] init: initializing backend `coolscan'
[22:43:25.822052] [dll] init: backend `coolscan' is version 1.0.0
[22:43:25.822075] [dll] load: searching backend `cardscan' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:25.822106] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[22:43:25.822137] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-cardscan.so.1'
[22:43:25.822423] [dll] init: initializing backend `cardscan'
[22:43:25.850359] [dll] init: backend `cardscan' is version 1.0.3
[22:43:25.855635] [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:25.855672] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[22:43:25.855708] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1'
[22:43:25.856167] [dll] init: initializing backend `canon_dr'
[22:43:25.856210] [dll] init: backend `canon_dr' is version 1.0.58
[22:43:25.882155] [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:25.882238] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[22:43:25.882283] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1'
[22:43:25.882993] [dll] init: initializing backend `canon630u'
[22:43:25.910232] [dll] init: backend `canon630u' is version 1.0.1
[22:43:25.912587] [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:25.912811] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[22:43:25.913062] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1'
[22:43:25.913701] [dll] init: initializing backend `canon'
[22:43:25.915642] [dll] init: backend `canon' is version 1.0.0
[22:43:25.915844] [dll] load: searching backend `bh' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:25.916210] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[22:43:25.916479] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-bh.so.1'
[22:43:25.916966] [dll] init: initializing backend `bh'
[22:43:25.920067] [dll] init: backend `bh' is version 1.0.4
[22:43:25.920108] [dll] load: searching backend `avision' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:25.931443] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[22:43:25.931540] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-avision.so.1'
[22:43:25.932053] [dll] init: initializing backend `avision'
[22:43:25.972791] [dll] init: backend `avision' is version 1.0.297
[22:43:26.003062] [dll] load: searching backend `as6e' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:26.011202] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[22:43:26.011292] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-as6e.so.1'
[22:43:26.012369] [dll] init: initializing backend `as6e'
[22:43:26.034837] [dll] load: searching backend `artec_eplus48u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:26.034890] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[22:43:26.034975] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec_eplus48u.so.1'
[22:43:26.035495] [dll] init: initializing backend `artec_eplus48u'
[22:43:26.048117] [dll] init: backend `artec_eplus48u' is version 1.0.0
[22:43:26.048394] [dll] load: searching backend `artec' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:26.048568] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[22:43:26.048747] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-artec.so.1'
[22:43:26.049233] [dll] init: initializing backend `artec'
[22:43:26.050134] [dll] init: backend `artec' is version 1.0.0
[22:43:26.050314] [dll] load: searching backend `apple' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:26.050606] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[22:43:26.051150] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-apple.so.1'
[22:43:26.051910] [dll] init: initializing backend `apple'
[22:43:26.053101] [dll] init: backend `apple' is version 1.0.0
[22:43:26.053279] [dll] load: searching backend `agfafocus' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:26.053439] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[22:43:26.053602] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-agfafocus.so.1'
[22:43:26.053993] [dll] init: initializing backend `agfafocus'
[22:43:26.054589] [dll] init: backend `agfafocus' is version 1.0.0
[22:43:26.054750] [dll] load: searching backend `abaton' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:26.054904] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[22:43:26.055065] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-abaton.so.1'
[22:43:26.055378] [dll] init: initializing backend `abaton'
[22:43:26.056165] [dll] init: backend `abaton' is version 1.0.0
[22:43:26.056328] [dll] load: searching backend `net' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:26.056485] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[22:43:26.056649] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-net.so.1'
[22:43:26.057057] [dll] init: initializing backend `net'
[22:43:26.062205] [dll] init: backend `net' is version 1.0.29
[22:43:26.067306] [dll] load: searching backend `hpaio' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane:/usr/lib64/sane'
[22:43:26.067497] [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[22:43:26.067677] [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-hpaio.so.1'
[22:43:26.070254] [dll] init: initializing backend `hpaio'
[22:43:26.072621] [dll] init: backend `hpaio' is version 1.0.0
[22:43:27.647260] [dll] sane_get_devices: found 2 devices
device `smfp:net;192.168.178.30' is a Samsung M267x 287x Series on 192.168.178.30 Scanner
device `xerox_mfp:tcp 192.168.178.30' is a Samsung M267x 287x Series multi-function peripheral
[22:43:27.647696] [dll] sane_exit: exiting
[22:43:27.647864] [dll] sane_exit: calling backend `smfp's exit function
[22:43:27.648487] [dll] sane_exit: calling backend `xerox_mfp's exit function
[22:43:27.648718] [dll] sane_exit: calling backend `umax1220u's exit function
[22:43:27.648951] [dll] sane_exit: calling backend `umax's exit function
[22:43:27.653372] [dll] sane_exit: calling backend `u12's exit function
[22:43:27.653693] [dll] sane_exit: calling backend `teco3's exit function
[22:43:27.653986] [dll] sane_exit: calling backend `teco2's exit function
[22:43:27.654277] [dll] sane_exit: calling backend `teco1's exit function
[22:43:27.654567] [dll] sane_exit: calling backend `tamarack's exit function
[22:43:27.654856] [dll] sane_exit: calling backend `sp15c's exit function
[22:43:27.655159] [dll] sane_exit: calling backend `snapscan's exit function
[22:43:27.655474] [dll] sane_exit: calling backend `sm3840's exit function
[22:43:27.655787] [dll] sane_exit: calling backend `sm3600's exit function
[22:43:27.656239] [dll] sane_exit: calling backend `sharp's exit function
[22:43:27.656538] [dll] sane_exit: calling backend `sceptre's exit function
[22:43:27.656832] [dll] sane_exit: calling backend `s9036's exit function
[22:43:27.657120] [dll] sane_exit: calling backend `rts8891's exit function
[22:43:27.657448] [dll] sane_exit: calling backend `ricoh2's exit function
[22:43:27.665988] [dll] sane_exit: calling backend `ricoh's exit function
[22:43:27.666367] [dll] sane_exit: calling backend `qcam's exit function
[22:43:27.666665] [dll] sane_exit: calling backend `plustek's exit function
[22:43:27.666998] [dll] sane_exit: calling backend `pixma's exit function
[22:43:27.667344] [dll] sane_exit: calling backend `pieusb's exit function
[22:43:27.667681] [dll] sane_exit: calling backend `pie's exit function
[22:43:27.667989] [dll] sane_exit: calling backend `niash's exit function
[22:43:27.668300] [dll] sane_exit: calling backend `nec's exit function
[22:43:27.668597] [dll] sane_exit: calling backend `mustek_usb2's exit function
[22:43:27.668935] [dll] sane_exit: calling backend `mustek_usb's exit function
[22:43:27.669249] [dll] sane_exit: calling backend `mustek's exit function
[22:43:27.669560] [dll] sane_exit: calling backend `microtek2's exit function
[22:43:27.669859] [dll] sane_exit: calling backend `microtek's exit function
[22:43:27.670149] [dll] sane_exit: calling backend `matsushita's exit function
[22:43:27.672270] [dll] sane_exit: calling backend `magicolor's exit function
[22:43:27.681550] [dll] sane_exit: calling backend `ma1509's exit function
[22:43:27.681697] [dll] sane_exit: calling backend `lexmark's exit function
[22:43:27.681879] [dll] sane_exit: calling backend `leo's exit function
[22:43:27.682010] [dll] sane_exit: calling backend `kvs40xx's exit function
[22:43:27.682136] [dll] sane_exit: calling backend `kvs20xx's exit function
[22:43:27.684308] [dll] sane_exit: calling backend `kvs1025's exit function
[22:43:27.684623] [dll] sane_exit: calling backend `kodakaio's exit function
[22:43:27.684871] [dll] sane_exit: calling backend `kodak's exit function
[22:43:27.685124] [dll] sane_exit: calling backend `ibm's exit function
[22:43:27.685510] [dll] sane_exit: calling backend `hs2p's exit function
[22:43:27.691355] [dll] sane_exit: calling backend `hpsj5s's exit function
[22:43:27.691531] [dll] sane_exit: calling backend `hpljm1005's exit function
[22:43:27.691654] [dll] sane_exit: calling backend `hp5590's exit function
[22:43:27.691788] [dll] sane_exit: calling backend `hp5400's exit function
[22:43:27.692101] [dll] sane_exit: calling backend `hp4200's exit function
[22:43:27.692292] [dll] sane_exit: calling backend `hp3900's exit function
[22:43:27.692565] [dll] sane_exit: calling backend `hp3500's exit function
[22:43:27.692859] [dll] sane_exit: calling backend `hp's exit function
[22:43:27.693119] [dll] sane_exit: calling backend `gt68xx's exit function
[22:43:27.693423] [dll] sane_exit: calling backend `genesys's exit function
[22:43:27.694422] [dll] sane_exit: calling backend `fujitsu's exit function
[22:43:27.694785] [dll] sane_exit: calling backend `escl's exit function
[22:43:27.696052] [dll] sane_exit: calling backend `epsonds's exit function
[22:43:27.696376] [dll] sane_exit: calling backend `epson2's exit function
[22:43:27.696694] [dll] sane_exit: calling backend `epjitsu's exit function
[22:43:27.696986] [dll] sane_exit: calling backend `dmc's exit function
[22:43:27.697260] [dll] sane_exit: calling backend `dell1600n_net's exit function
[22:43:27.697696] [dll] sane_exit: calling backend `coolscan3's exit function
[22:43:27.697986] [dll] sane_exit: calling backend `coolscan's exit function
[22:43:27.698326] [dll] sane_exit: calling backend `cardscan's exit function
[22:43:27.698615] [dll] sane_exit: calling backend `canon_dr's exit function
[22:43:27.698906] [dll] sane_exit: calling backend `canon630u's exit function
[22:43:27.699196] [dll] sane_exit: calling backend `canon's exit function
[22:43:27.699445] [dll] sane_exit: calling backend `bh's exit function
[22:43:27.703362] [dll] sane_exit: calling backend `avision's exit function
[22:43:27.703641] [dll] sane_exit: calling backend `artec_eplus48u's exit function
[22:43:27.703846] [dll] sane_exit: calling backend `artec's exit function
[22:43:27.704045] [dll] sane_exit: calling backend `apple's exit function
[22:43:27.704239] [dll] sane_exit: calling backend `agfafocus's exit function
[22:43:27.704434] [dll] sane_exit: calling backend `abaton's exit function
[22:43:27.704637] [dll] sane_exit: calling backend `net's exit function
[22:43:27.706441] [dll] sane_exit: calling backend `hpaio's exit function
[22:43:27.707854] [dll] sane_exit: finished

avahi-browse -rt _ipp._tcp
+   eno1 IPv4 Samsung M267x 287x Series (SEC30CDA71A4820)   Internet Printer     local
=   eno1 IPv4 Samsung M267x 287x Series (SEC30CDA71A4820)   Internet Printer     local
   hostname = [SEC30CDA71A4820.local]
   address = [192.168.178.30]
   port = [631]
   txt = ["Staple=F" "Sort=F" "Fax=T" "Scan=T" "Punch=0" "PaperCustom=T" "Duplex=F" "Copies=T" "Color=F" "Collate=F" "Bind=F" "URF=W8,RS600,IS1,CP1,IFU0,PQ4,OB10,V1.2" "UUID=16a65700-007c-1000-bb49-30cda71a4820" "MDL=M267x 287x Series" "MFG=Samsung" "usb_CMD=MFG:Samsung;CMD:SPL,URF,FAX,FWV,PIC,DCU,EXT;MDL:M267x 287x Series;CLS:PRINTER;CID:SA_SPL3_BW;MODE:FAX3,SCN,SPL3,R000105;" "usb_MDL=M267x 287x Series" "usb_MFG=Samsung" "adminurl=http://SEC30CDA71A4820.local./sws/index.html?link=/sws/app/settings/network/AirPrint/AirPrint.html" "pdl=application/octet-stream,application/x-QPDL,image/urf" "product=(Samsung M267x 287x Series)" "ty=Samsung M267x 287x Series" "priority=51" "qtotal=1" "note=" "rp=ipp/print" "txtvers=1"]
id
uid=1000(joh) gid=1000(joh) Gruppen=1000(joh),4(adm),7(lp),20(dialout),24(cdrom),27(sudo),29(audio),30(dip),44(video),46(plugdev),100(users),115(lpadmin),118(netdev),125(scanner),135(sambashare),136(vboxusers)

Kellerkind_2009

  • Gast
Re: Scanner beim Netzwerkdrucker Samsung M-267x
« Antwort #23 am: 06.10.2020, 14:35:07 »
Der Samsung ist jetzt Verfügbar device `smfp:net;192.168.178.30' is a Samsung M267x 287x Series on 192.168.178.30 Scanner

Bitte mal Auswählen und Testen.

Re: Scanner beim Netzwerkdrucker Samsung M-267x
« Antwort #24 am: 07.10.2020, 22:57:38 »
Der Samsung ist jetzt Verfügbar device `smfp:net;192.168.178.30' is a Samsung M267x 287x Series on 192.168.178.30 Scanner

Bitte mal Auswählen und Testen.

Jubel 2/2. Das Scannen geht jetzt auch über Netzwerk.

Was mir noch eine Rätsel ist: Immer wenn ich an USB etwas ändere (z.B. Maus anstecke) dann wird der Samsung angesprochen (also ggf. aus dem sleep geholt)
Und das, obwohl er am USB gar nicht angeschlossen ist.

Re: Scanner beim Netzwerkdrucker Samsung M-267x
« Antwort #25 am: 07.10.2020, 23:03:57 »
Zitat
Immer wenn ich an USB etwas ändere (z.B. Maus anstecke) dann wird der Samsung angesprochen
nur so n Idee
eventuell schaust du mal unter Bevorzugte Anwendungen > Entfernbare Medien

Re: Scanner beim Netzwerkdrucker Samsung M-267x
« Antwort #26 am: 09.10.2020, 08:29:53 »
Zitat
Immer wenn ich an USB etwas ändere (z.B. Maus anstecke) dann wird der Samsung angesprochen
nur so n Idee
eventuell schaust du mal unter Bevorzugte Anwendungen > Entfernbare Medien

Ham wa nich:
screenshot
screenshot

Kellerkind_2009

  • Gast
Re: Scanner beim Netzwerkdrucker Samsung M-267x
« Antwort #27 am: 09.10.2020, 14:19:48 »
Zitat
Was mir noch eine Rätsel ist: Immer wenn ich an USB etwas ändere (z.B. Maus anstecke) dann wird der Samsung angesprochen (also ggf. aus dem sleep geholt)
Und das, obwohl er am USB gar nicht angeschlossen ist.

Das ist in der Tat merkwürdig! Dazu kann ich nichts sagen -- hatte ich noch nie  ::)

Gruß Stephan