Willkommen Gast. Bitte einloggen oder registrieren. Haben Sie Ihre Aktivierungs E-Mail übersehen?
28.02.2021, 08:38:38

.
Einloggen mit Benutzername, Passwort und Sitzungslänge

Mitglieder
  • Mitglieder insgesamt: 25320
  • Letzte: SvRe
Statistiken
  • Beiträge insgesamt: 718718
  • Themen insgesamt: 58131
  • Heute online: 520
  • Am meisten online: 2287
  • (22.01.2020, 19:20:24)
Benutzer Online

Autor Thema: [gelöst]  64 Bit Mint20 Cinnamon,Verbindung über das Netzwerk zur FritzboxNAS schlägt fehl  (Gelesen 637 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

Hy, finde keine Lösung, hier der Ablauf nach öffnen des Netzwerkes:
Bild 01 dann 02, wobei der Ordner leer bleibt. Fritzbox ist richtig eingestellt.
Das Win Netzwerk wird geöffnet.
« Letzte Änderung: 11.12.2020, 18:30:59 von blujaz »

kenne jetzt deinen Anbieter nicht,
hier bei der Telekom würde es so aussehen
smb://192.168.178.1/fritz.nas/
in Nemo oben eingeben,
habe es dann als Lesezeichen gesetzt

Schmeiß einfach mal die Forensuche an, da waren in der letzten Zeit mehrere Thread zu diesem Thema. Wahrscheinlich hast Du auch das neue Fritz-Os. Mal ein paar Beispiele
https://www.linuxmintusers.de/index.php?topic=64297
https://www.linuxmintusers.de/index.php?topic=65238

Schmeiß einfach mal die Forensuche an, da waren in der letzten Zeit mehrere Thread zu diesem Thema. Wahrscheinlich hast Du auch das neue Fritz-Os. Mal ein paar Beispiele
https://www.linuxmintusers.de/index.php?topic=64297
https://www.linuxmintusers.de/index.php?topic=65238

Verstehe nicht ganz warum Mint19 (an mehreren Rechnern ausprobiert) hier klar kommt, Mint20 scheinbar weniger. Vielleicht kommt ja ein Update, ich warte mal ab.
Nach dem ich mich etwas eingelesen habe denke ich nicht das es ein Update geben wird.

So wie ich das verstanden habe gibt es Verbindungsprotokolle

client min protocol = NT1
client min protocol = NT2
client min protocol = NT3

wobei client min protocol = NT1 mittlerweile ein Risiko da stellt und dieses nicht mehr verwendet wird. Ältere Fritzboxen brauchen aber auf beiden Seiten das client min protocol = NT1, darum muss es in der Datei smb.conf eingetragen werden. Ebenso habe ich noch server min protocol = NT1 dazu gepackt.
---------------------------

Meine Lösung ist hier ein Starter "Netz Ein" und "Netz aus", nach dem Aufbau der Verbindungen durch Netz Ein zur Fritzbox und im Netzwerk zweiter PC(und PC2 zu PC1)
einfach wieder durch Netz Aus das Protokoll wieder zu verändern..
so sieht es aus bei mir.
---------------------------------

Dazu einen Ordner "0smb.confNT1Netzschalter"

Dazu mit den Ordnerinhalt "Netz Ein" und "Netz aus"
--------------------------------
--------------------------------

Ordner "Netz Ein"

Starter Netzverbindungein.txt
Desktop Entry]
Name=Netzverbindung
Exec=bash -c "sudo cp /0smb.confNT1Netzschalter/netzschalterein/smb.conf /etc/samba"
Comment=
Terminal=true
Type=Application
Name[de_DE]=Netzverbindung Ein
GenericName[de_DE]=Netzstarter für Laptop
Icon=/0smb.confNT1Netzschalter/netzschalterein/Netz ein.bmp
Categories=System;

und die dazugehörige smb.conf

client min protocol = NT1
server min protocol = NT1

[0netzworf]
path= /home/worf
writeable = yes
guest ok = yes

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = HOKUSPOKUS

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.
   logging = file

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone server" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
   server role = standalone server

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap config * :              backend = tdb
;   idmap config * :              range   = 3000-7999
;   idmap config YOURDOMAINHERE : backend = tdb
;   idmap config YOURDOMAINHERE : range   = 100000-999999
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 means that usershare is disabled.
#   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   
Smiley Wink Cheesy Grin Angry Sad Shocked Cool Huh? Roll Eyes Tongue Embarrassed Lips Sealed Undecided Kiss Cry
printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin
--------------------------------
--------------------------------

Ordner Netz aus

Starter netzwerkverbindungaus

[code][Desktop Entry]
Name=Netzverbindung
Exec=bash -c "sudo sudo service smbd reload  &&  cp /0smb.confNT1Netzschalter/netzschalteraus/smb.conf /etc/samba/"
Comment=
Terminal=true
Type=Application
Name[de_DE]=Netzverbindung Aus
GenericName[de_DE]=Netzstarter für Laptop
Icon=/0smb.confNT1Netzschalter/netzschalteraus/Netz aus.bmp
Categories=System;
[/code]

und die dazugehörige smb.conf
client min protocol = NT3
server min protocol = NT3

[0netzworf]
path= /home/worf
writeable = yes
guest ok = yes

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = HOKUSPOKUS

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
# Append syslog@1 if you want important messages to be sent to syslog too.
   logging = file

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# Server role. Defines in which mode Samba will operate. Possible
# values are "standalone server", "member server", "classic primary
# domain controller", "classic backup domain controller", "active
# directory domain controller".
#
# Most people will want "standalone server" or "member server".
# Running as "active directory domain controller" will require first
# running "samba-tool domain provision" to wipe databases and create a
# new domain.
   server role = standalone server

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

#
# The following settings only takes effect if 'server role = primary
# classic domain controller', 'server role = backup domain controller'
# or 'domain logons' is set
#

# It specifies the location of the user's
# profile directory from the client point of view) The following
# required a [profiles] share to be setup on the samba server (see
# below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the
# SAMR RPC pipe. 
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe. 
; add group script = /usr/sbin/addgroup --force-badname %g

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap config * :              backend = tdb
;   idmap config * :              range   = 3000-7999
;   idmap config YOURDOMAINHERE : backend = tdb
;   idmap config YOURDOMAINHERE : range   = 100000-999999
;   template shell = /bin/bash

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 means that usershare is disabled.
#   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.
# Un-comment the following parameter to make sure that only "username"
# can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   guest ok = no
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   commhttps://www.linuxmintusers.de/Smileys/SoLoSMiLeYS1/smiley.gifent = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------

Voraussetzung Netzwerk ist aus,
durch den Starter Netzwerk Ein wird die mit der dazugehörigen  smb
(hier client min protocol = NT1, server min protocol = NT1) die smb überschrieben und die Netzwerverbindung mit dem client protocol = NT1(unsicher) aufgebaut.

Netzwerverbindungen Fritzbox, PC1, PC2 hin und her werden aufgebaut.

Wenn die Netzwerverbindungen stehen Starter Netzwerk aus betätigen und die mit der dazugehörigen  smb
(hier client min protocol = NT3, server min protocol = NT3) wird die smb überschrieben und die Netzwerverbindung mit dem client protocol = NT3(sicher) aufgebaut.
------------------------------
------------------------------

So lange die Netzwerkordner nicht ausgehängt werden bleibt das Netzwerk bestehen.
------------------------------

Also bei mir funktioniert es, bitte auf beiden PCs einen Ordner freigeben.
-----------------------------
Bitte wartet noch mal ab, so lange bin ich auch noch nicht dabei. Die Macher hier haben bestimmt noch etwas dazu zu sagen. Zumal ich mir nicht sicher bin wo der Ordner
"0smb.confNT1Netzschalter" gesetzt werden sollte.

Ich hoffe es ist zu verstehen.
« Letzte Änderung: 10.12.2020, 23:20:46 von blujaz »

Den ganzen Kram hättest du dir mE sparen können! Einfach SMB1 erlauben und gut. Das "Risiko" besteht eher für große Firmennetze, nicht für kleine Heimanwender wie dich.

Den ganzen Kram hättest du dir mE sparen können!

Mag schon sein, macht aber nichts, es haut ja hin und war somit nicht ganz umsonst.