Systemanalyse-LM19 Tessa-64 Bit-8Gb-IP4 - Bootzeit fast 3 Minuten

[Butterklatscher]

Code: [Auswählen]

Hallo mein Rechner braucht über 2:45 Minuten zum Hochfahren. Ich bitte um Hilfe diese Startzeit zu verkürzen.

[peter@peter-P5K:~$ lspci -v
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: Intel 82P35 Northbridge
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>

00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000cf800000-00000000dfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at b880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at bc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Flags: bus master, medium devsel, latency 0, IRQ 18
Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Flags: bus master, fast devsel, latency 0, IRQ 25
Memory at fe7f8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 17
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: c0000000-c03fffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 17
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000c0600000-00000000c07fffff
Capabilities: <access denied>
Kernel driver in use: pcieport

00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at b080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at b400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at b480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at fe7ff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. 82801IB (ICH9) LPC Interface Controller
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich

00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] (rev 02) (prog-if 8f [PCI native mode controller, supports both channels switched to ISA compatibility mode, supports bus mastering])
Subsystem: ASUSTeK Computer Inc. 82801IB (ICH9) 2 port SATA Controller [IDE mode]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 22
I/O ports at a000 [size=8]
I/O ports at 9c00 [size=4]
I/O ports at 9880 [size=8]
I/O ports at 9800 [size=4]
I/O ports at 9480 [size=16]
I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: pata_acpi

00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Flags: medium devsel, IRQ 5
Memory at fe7ff400 (64-bit, non-prefetchable) [size=256]
I/O ports at 0400 [size=32]
Kernel modules: i2c_i801

00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] (rev 02) (prog-if 85 [PCI native mode-only controller, supports bus mastering])
Subsystem: ASUSTeK Computer Inc. P5K PRO Motherboard: 82801IR [ICH9R]
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 22
I/O ports at b000 [size=8]
I/O ports at ac00 [size=4]
I/O ports at a880 [size=8]
I/O ports at a800 [size=4]
I/O ports at a480 [size=16]
I/O ports at a400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: pata_acpi

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii PRO [Radeon R9 290/390] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology Hawaii PRO [Radeon R9 290/390]
Flags: bus master, fast devsel, latency 0, IRQ 24
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at cf800000 (64-bit, prefetchable) [size=8M]
I/O ports at c000 [size=256]
Memory at fe880000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: amdgpu
Kernel modules: radeon, amdgpu

01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X]
Subsystem: PC Partner Limited / Sapphire Technology Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X]
Flags: bus master, fast devsel, latency 0, IRQ 26
Memory at fe8fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel

02:00.0 Ethernet controller: Qualcomm Atheros Attansic L1 Gigabit Ethernet (rev b0)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 27
Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fe9a0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl1
Kernel modules: atl1

03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. JMB363 SATA/IDE Controller
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at feafe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at feae0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci

03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 03) (prog-if 85 [PCI native mode-only controller, supports bus mastering])
Subsystem: ASUSTeK Computer Inc. JMB363 SATA/IDE Controller
Flags: bus master, fast devsel, latency 0, IRQ 17
I/O ports at dc00 [size=8]
I/O ports at d880 [size=4]
I/O ports at d800 [size=8]
I/O ports at d480 [size=4]
I/O ports at d400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
Kernel modules: pata_jmicron, pata_acpi

05:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Motherboard
Flags: bus master, medium devsel, latency 64, IRQ 16
Memory at febff800 (32-bit, non-prefetchable) [size=2K]
I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire_ohci

]

[billyfox05]

schau mal hier - da gibt es auch Bootzeit-Prbleme
https://www.linuxmintusers.de/index.php?topic=56055.msg755823;topicseen#new

zum Ermitteln der UUID`s eignen sich m.E. besser

Code: [Auswählen]

blkidoder

Code: [Auswählen]

lsblk -f

[Slangbein]

Um die Ursache einzugrenzen, ist folgender Befehl sinvoll:
systemd-analyze blame
Die Zeitfresser stehen oben

[ehtron]

Hi
fehlt noch die desktop angabe und

Code: [Auswählen]

cat /etc/fstab
und zeige auch mal

Code: [Auswählen]

inxi -Fz

[Butterklatscher]

Bitte hier die Daten. Übrigens habe ich den CINNAMON 4.0.10 Desktop. Sorry.

Code: [Auswählen]

/dev/sda1: UUID="nGVeaC-eijz-MMdz-hI1o-0Xjd-Ywmp-NfsCo3" TYPE="LVM2_member" PARTUUID="a5e9d3ff-01"
/dev/mapper/mint--vg-root: UUID="e678454e-2a2a-44ae-b8db-8862077d6357" TYPE="ext4"
/dev/mapper/mint--vg-swap_1: UUID="c0514e23-b052-4106-b972-3e6d3933b6cf" TYPE="swap"

[/dev/sda1: UUID="nGVeaC-eijz-MMdz-hI1o-0Xjd-Ywmp-NfsCo3" TYPE="LVM2_member" PARTUUID="a5e9d3ff-01"
/dev/mapper/mint--vg-root: UUID="e678454e-2a2a-44ae-b8db-8862077d6357" TYPE="ext4"
/dev/mapper/mint--vg-swap_1: UUID="c0514e23-b052-4106-b972-3e6d3933b6cf" TYPE="swap"
][/code]

[/dev/sda1: UUID="nGVeaC-eijz-MMdz-hI1o-0Xjd-Ywmp-NfsCo3" TYPE="LVM2_member" PARTUUID="a5e9d3ff-01"
/dev/mapper/mint--vg-root: UUID="e678454e-2a2a-44ae-b8db-8862077d6357" TYPE="ext4"
/dev/mapper/mint--vg-swap_1: UUID="c0514e23-b052-4106-b972-3e6d3933b6cf" TYPE="swap"
peter@peter-P5K:~$ systemd-analyze blame
         39.152s postgresql@10-main.service
         34.786s amavis.service
         23.412s postfix@-.service
         20.591s libvirtd.service
         19.824s configure-printer@usb-001-003.service
         15.883s networkd-dispatcher.service
         14.388s teamviewerd.service
         10.053s systemd-journal-flush.service
          8.840s ubuntu-system-adjustments.service
          8.650s lightdm.service
          8.649s plymouth-quit-wait.service
          8.056s ModemManager.service
          7.920s NetworkManager.service
          7.130s NetworkManager-wait-online.service
          6.747s apparmor.service
          6.672s accounts-daemon.service
          6.322s udisks2.service
          6.252s dev-mapper-mint\x2d\x2dvg\x2droot.device
          5.027s bacula-director.service
          4.511s vboxdrv.service
          4.215s fruhod.service
          4.170s ssh.service
          3.764s gpu-manager.service
lines 1-23

[peter@peter-P5K:~$ inxi -Fz
System:
  Host: peter-P5K Kernel: 5.0.0-20-generic x86_64 bits: 64
  Desktop: Cinnamon 4.0.10 Distro: Linux Mint 19.1 Tessa
Machine:
  Type: Desktop Mobo: ASUSTeK model: P5K v: Rev 1.xx serial: <filter>
  BIOS: American Megatrends v: 1201 date: 10/14/2008
CPU:
  Topology: Quad Core model: Intel Core2 Quad bits: 64 type: MCP
  L2 cache: 4096 KiB
  Speed: 1969 MHz min/max: 1596/2394 MHz Core speeds (MHz): 1: 1847 2: 1885
  3: 1604 4: 1604
Graphics:
  Device-1: AMD Hawaii PRO [Radeon R9 290/390] driver: amdgpu v: kernel
  Display: x11 server: X.Org 1.19.6 driver: amdgpu,ati
  unloaded: fbdev,modesetting,radeon,vesa resolution: 1920x1080~60Hz
  OpenGL: renderer: AMD Radeon R9 200 Series (HAWAII DRM 3.27.0
  5.0.0-20-generic LLVM 8.0.0)
  v: 4.5 Mesa 19.0.2
Audio:
  Device-1: Intel 82801I HD Audio driver: snd_hda_intel
  Device-2: AMD Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X]
  driver: snd_hda_intel
  Device-3: Logitech QuickCam E2500 series type: USB
  driver: gspca_zc3xx,snd-usb-audio
  Sound Server: ALSA v: k5.0.0-20-generic
Network:
  Device-1: Qualcomm Atheros Attansic L1 Gigabit Ethernet driver: atl1
  IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 931.51 GiB used: 552.78 GiB (59.3%)
  ID-1: /dev/sda vendor: Western Digital model: WD10EZEX-60WN4A0
  size: 931.51 GiB
Partition:
  ID-1: / size: 907.83 GiB used: 552.78 GiB (60.9%) fs: ext4 dev: /dev/dm-0
  ID-2: swap-1 size: 8.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/dm-1
Sensors:
  System Temperatures: cpu: 63.0 C mobo: N/A gpu: amdgpu temp: 63 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 275 Uptime: 4h 10m Memory: 7.79 GiB used: 4.29 GiB (55.1%)
  Shell: bash inxi: 3.0.27

[$ cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
/dev/mapper/mint--vg-root /               ext4    errors=remount-ro 0       1
/dev/mapper/mint--vg-swap_1 none            swap    sw              0       0

[aexe]

Die Zeitfresser stehen oben

Code: [Auswählen]

         39.152s postgresql@10-main.service
         34.786s amavis.service
         23.412s postfix@-.service
         20.591s libvirtd.service
         19.824s configure-printer@usb-001-003.service
         15.883s networkd-dispatcher.service
         14.388s teamviewerd.service
         [ … ]
Weißt Du welche Anwendungen dahinter stecken?

[Slangbein]

Hallo Butterklatscher,

die meisten Startprobleme kommen von Problemen beim Einbinden/ Mounten von Geräten. Bei dir scheint es vom Setup deiner Serversoftware zu kommen:
postgresql ist eine Datenbanksoftware
amavis ist eine Mail-Virusscan-Software
postfix ein Mailserver
libvirtd eine Virtualisierungssoftware
configure-printer richtet deinen an USB angeschlossenen Drucker ein
teamviewer ist eine Fernwartungssoftware

Da braucht es schon spezielles Knowhow, wie viel Zeit die üblicherweise beim Systemstart für ihre Initialisierung verbraten, und wie da mehr Zeit herauszukitzeln ist. Zu erst einmal: Sind die alle von dir in Verwendung, oder ist da mal installiert und dann vergessen worden?

[Butterklatscher]

Hallo, ja das ist auf jeden Fall möglich dass ich das eine und andere Programm mal ausprobieren wollte. Manches Mal entpacke ich die und dann finde ich die nirgends in der AV. Dann geraten die in Vergessenheit. Drucker und Teamviever benötige ich auf jeden Fall. Aber alle andere Software, wie z.Bsp. Virusscansoftware (wieso habe ich die mir via Linux ausprobieren wollen ist mir ein Rätsel). Vielleicht könnt ihr mir bitte helfen diese zu deinstallieren. Ich weiss garnicht wo ich diese finde. Ich vermute im Startprogramm. Ich werde da mal suchen und warte auch auf Eure Antworten. Danke

[losrobos]

Virusscansoftware

Welche hast Du denn installiert?

[geobart]

Amavis, u.a. Antwort #6

[losrobos]

Scheint recht einfach zu sein, hast den Spam-Filter wohl über die Paket-Verwaltung installiert, zeigt mal:

Code: [Auswählen]

sudo apt list --installed | grep amavis

[aexe]

Es geht auch noch einfacher:

Code: [Auswählen]

apt list --installed | grep amavis "sudo" nur verwenden, wenn es erforderlich ist.

[losrobos]

apt list --installed | grep amavis

Unter Debian nicht ...

[aexe]

Betreff: Systemanalyse-LM19 Tessa-64 Bit-8Gb-IP4 - Bootzeit fast 3 Minuten

Bei LMDE 3 (Debian-Edition) braucht "apt list" auch kein "sudo"

Bei Mint braucht "apt" grundsätzlich kein "sudo".
Bei Bedarf wird das Passwort abgefragt.
Info: https://www.howtogeek.com/234583/simplify-command-line-package-management-with-apt-instead-of-apt-get/

Dies ist ein LinuxMint-Forum (linuxmintusers.de)

[losrobos]

Bei LMDE 3 (Debian-Edition) braucht "apt list" auch kein "sudo"

OK, hast recht. Auch unter Debian, bisher wohl nicht vernommen ...