Willkommen Gast. Bitte einloggen oder registrieren. Haben Sie Ihre Aktivierungs E-Mail übersehen?
09.12.2019, 15:56:17

.
Einloggen mit Benutzername, Passwort und Sitzungslänge

Mitglieder
  • Mitglieder insgesamt: 22926
  • Letzte: logox
Statistiken
  • Beiträge insgesamt: 623689
  • Themen insgesamt: 50361
  • Heute online: 863
  • Am meisten online: 992
  • (17.11.2018, 20:17:55)
Benutzer Online

Autor Thema:  LM19 Tessa-64 Bit-8Gb-IP4 bleibt öfters hängen in den Anwendungen  (Gelesen 1649 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

Hallo neuerdings bleibt mein Rechner während den Anwendungen öfters hängen. Vor allem wenn ich Dateikoffer auf dem Schreibtisch hin und her schiebe. Aber auch bei anderen Anwendungen. Dann muss ich wieder neu hochfahren und beim zweiten Male geschieht das viel weniger, also kaum noch. Aber trotzdem aller 2 Stunden doch einmal. Was mir aufgefallen ist, neuerdings kommen beim Hochfahren aus dem Lautsprecher Knackgeräusche und auch hin und wieder wenn ich Anwendungen anstosse. Das war bis vor Kurzem nicht. Nun dachte ich dass es an meiner neuen GRAKA liegt (ist eine Gebrauchte), aber alle Spielanwendungen laufen ohne Aussetzer und Knackgeräusche in den Grafikanwendungen auf Stufe Maximum ohne hängenzubleiben.

Nebenbei, ich weiss nicht ob das für diesen Fehler von Bedeutung ist....mein Hochfahren dauert seit vielen Monaten über 3 Minuten. Das ging früher mit LM18 sehr viel schneller. Es dauerte da nur 90 sec. Ausser der GRAKA sind die Innereien alle noch drinn seit LM18.

Hi :)
bitte hilfe hier oben auf der page verinnerlichen .. danke :)

desktop?
zeig mal bitte als codeblock
inxi -Fz

Nein lieber ehtron, das heisst bei Linux Schreibtisch und nicht Desktop.  :D  Und wie meinst Du das mit der Hilfe oben verinnerlichen?

[~$ inxi -Fz
System:
  Host: peter-P5K Kernel: 5.0.0-20-generic x86_64 bits: 64
  Desktop: Cinnamon 4.0.10 Distro: Linux Mint 19.1 Tessa
Machine:
  Type: Desktop Mobo: ASUSTeK model: P5K v: Rev 1.xx serial: <filter>
  BIOS: American Megatrends v: 1201 date: 10/14/2008
CPU:
  Topology: Quad Core model: Intel Core2 Quad bits: 64 type: MCP
  L2 cache: 4096 KiB
  Speed: 1604 MHz min/max: 1596/2394 MHz Core speeds (MHz): 1: 1604 2: 1604
  3: 1604 4: 1604
Graphics:
  Device-1: AMD Hawaii PRO [Radeon R9 290/390] driver: radeon v: kernel
  Display: x11 server: X.Org 1.19.6 driver: ati,radeon
  unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
  OpenGL: renderer: AMD HAWAII (DRM 2.50.0 5.0.0-20-generic LLVM 8.0.0)
  v: 4.5 Mesa 19.0.2
Audio:
  Device-1: Intel 82801I HD Audio driver: snd_hda_intel
  Device-2: AMD Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X]
  driver: snd_hda_intel
  Device-3: Logitech QuickCam E2500 series type: USB
  driver: gspca_zc3xx,snd-usb-audio
  Sound Server: ALSA v: k5.0.0-20-generic
Network:
  Device-1: Qualcomm Atheros Attansic L1 Gigabit Ethernet driver: atl1
  IF: enp2s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 931.51 GiB used: 546.86 GiB (58.7%)
  ID-1: /dev/sda vendor: Western Digital model: WD10EZEX-60WN4A0
  size: 931.51 GiB
Partition:
  ID-1: / size: 907.83 GiB used: 546.86 GiB (60.2%) fs: ext4 dev: /dev/dm-0
  ID-2: swap-1 size: 8.00 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/dm-1
Sensors:
  System Temperatures: cpu: 56.0 C mobo: N/A gpu: radeon temp: 45 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 249 Uptime: 20m Memory: 7.79 GiB used: 2.29 GiB (29.3%)
  Shell: bash inxi: 3.0.27
]

Nein lieber ehtron, das heisst bei Linux Schreibtisch und nicht Desktop.

Das heißt schon Desktop!
Desktop: Cinnamon, Mate, Xfce, LXDE oder noch LM 18.X KDE!

Desktop: Cinnamon 4.0.10


Und wie meinst Du das mit der Hilfe oben verinnerlichen?

https://www.linuxmintusers.de/index.php?action=wiki;page=Supportanfrage

Was du bei dem Rechner mit dem 5.0er Ubuntu - Kernel willst, weiß ich nicht!?
« Letzte Änderung: 11.07.2019, 21:16:57 von tommix »

Ich bin früher mal darauf hingewiesen worden und sogar angegangen worden, wenn ich das nicht mache, würde man mir weitere Hilfe versagen. Von wem weiss ich nicht mehr, aber ich solle in der Betreffzeile sämtliche Daten angeben, auch das System. Somit mache ich das immer. Ja stimmt, mit dem Desktop. Ich dachte dass das mit dem Desktop nur für Windows gilt, weil im System nur vom Schreibtisch die Rede ist.

Aber gibt es noch keine Erkenntnisse zu meiner Fehlerangabe? Gerade eben, bevor ich hier geschrieben habe, ist er wieder hängengeblieben. das 4. Mal heute innerhalb 10 Stunden.


Hallo,
Zitat
Device-1: AMD Hawaii PRO [Radeon R9 290/390] driver: radeon
bei der aktuellen Karte sollte normalerweise der Treiber amdgpu angeboten und verwendet werden, die R9 290 könnte aber auch gerade noch aus der Unterstützung herausfallen.
Zitat
Gerade eben, bevor ich hier geschrieben habe, ist er wieder hängengeblieben. das 4. Mal heute innerhalb 10 Stunden.
... Hochfahren dauert seit vielen Monaten über 3 Minuten.
Mal im Kernelpuffer schauen, wo es hakt.
dmesg > dmesg.txt(auf den Zeitstempel am Anfang achten)
Ansonsten das Übliche:  Speicherprüfung mehrere Stunden bei Systemstart auswählen und laufen lassen (memtest) und Festplattenstatus prüfen (smartmon). → https://wiki.ubuntuusers.de/Festplattenstatus/

Hi :)
ich meinte die hilfe hier oben im menü der page... so wie viele seiten als auch programme eine hilfe haben, die man nutzen sollte.

3min boot?
da würde ich mich in sachen falsche fstab eintragungen schlau machen.

ansonsten bleibt noch
speichercheck
smart werte der festplatte (laufwerke)
so wie du das bescheibst wird auch das netzteil gern genommen....

Ja mit einigen Infos von euch kann ich leider nicht viel anfangen. Ausser dass ich danach googeln könnte. Ich habe nun auch schon viele Monate Linux, aber konnte mich berufsmässig aus Zeitgründen noch nicht allzuviel mit den Tiefen von Linux beschäftigen. Nun habe ich total keine Ahnung wohin ich diese Info eintragen oder suchen soll: dmesg > dmesg.txt. Ich habe es schon ins Terminal eingegeben...aber es hat ja was mit TXT zu tun. Das gehört ja nicht ins Terminal. Der Treiber ist vorhanden, nur stehen da zwei weitere. Soll ich die anderen zwei mal ausprobieren?  Ja und mit fstab habe ich mich auch noch nicht beschäftigt. Speichercheck wird nicht das Problem sein. Ausserdem habe ich noch andere Speicherriegel da. Muss ich mal wechseln und ausprobieren. Aber wie ist das mit dem Netzteil gemeint? Soll ich ein anderes Netzteil ausprobieren? Ich habe übrigens mal einen anderen Kernel ausprobiert. Damit hatte sich aber auch nichts geändert. Ich habe aber bei der neuen Aktualisierung des letzten oder vorletzten Kernel folgende Fehlermeldungen erhalten.

Fehlerinformation bei Kernelaufrüstung:

W: Ziel Packages (main/binary-amd64/Packages) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:2
W: Ziel Packages (main/binary-i386/Packages) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:2
W: Ziel Packages (main/binary-all/Packages) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:2
W: Ziel Translations (main/i18n/Translation-de_DE) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:2
W: Ziel Translations (main/i18n/Translation-de) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:2
W: Ziel Translations (main/i18n/Translation-en) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:2
W: Ziel DEP-11 (main/dep11/Components-amd64.yml) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:2
W: Ziel DEP-11 (main/dep11/Components-all.yml) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:2
W: Ziel CNF (main/cnf/Commands-amd64) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:2
W: Ziel CNF (main/cnf/Commands-all) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:2
W: Ziel Packages (main/binary-amd64/Packages) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:3
W: Ziel Packages (main/binary-i386/Packages) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:3
W: Ziel Packages (main/binary-all/Packages) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:3
W: Ziel Translations (main/i18n/Translation-de_DE) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:3
W: Ziel Translations (main/i18n/Translation-de) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:3
W: Ziel Translations (main/i18n/Translation-en) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:3
W: Ziel DEP-11 (main/dep11/Components-amd64.yml) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:3
W: Ziel DEP-11 (main/dep11/Components-all.yml) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:3
W: Ziel CNF (main/cnf/Commands-amd64) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:3
W: Ziel CNF (main/cnf/Commands-all) ist mehrfach konfiguriert in /etc/apt/sources.list.d/additional-repositories.list:1 und /etc/apt/sources.list.d/additional-repositories.list:3

Die dmesg.txt liegt jetzt in deinem Benutzerverzeichnis und enthält die Daten des Kernelpuffers. Nachschauen und/oder hier hochladen/anhängen.

Deine https://wiki.ubuntuusers.de/sources.list/ enthält anscheinend mehrere doppelte Einträge. Mal prüfen.

Der neuere Grafiktreiber ist offensichtlich im Kernel enthalten. Kannst Du ggf. in der Treiberverwaltung akivieren.
« Letzte Änderung: 12.07.2019, 17:56:15 von Flash63 »

Danke Dir. Aber das mit dem Treiber in der Treiberverwaltung hatte ich schon vor ca. 4 Wochen hier als Thema mit Informationsaustausch von ca. 6 Seiten. Es ist keine Lösung gefunden worden. Aber es funktioniert ja. Bloss im Nachhinein erkenne ich ja, dass, wenn ich nicht in die T-Verwaltung reinkomme, garnicht an die Kernel rankomme. Oder gibt es da einen anderen Weg?  Im Benutzerverzeichnis habe ich Anhängendes gefunden. Aber das sind böhmische Dörfer für mich. Mit den doppelten Einträgen muss ich mich erst noch beschäftigen. Wenn ich diese löschen könnte, weiss nicht wie das geht, gibt es da ausser den Vorteil von mehr Speicherplatz auch noch andere? Könnten dann diese Fehler verschwinden? 

[[    0.000000] microcode: microcode updated early to revision 0x6a, date = 2010-10-02
[    0.000000] Linux version 5.0.0-20-generic (buildd@lgw01-amd64-039) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #21~18.04.1-Ubuntu SMP Thu Jun 27 04:04:37 UTC 2019 (Ubuntu 5.0.0-20.21~18.04.1-generic 5.0.8)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-20-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff7ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bff80000-0x00000000bff8dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bff8e000-0x00000000bffdffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: System manufacturer P5K/P5K, BIOS 1201    10/14/2008
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2405.463 MHz processor
[    0.004915] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.004917] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.004923] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[    0.004929] MTRR default type: uncachable
[    0.004930] MTRR fixed ranges enabled:
[    0.004932]   00000-9FFFF write-back
[    0.004933]   A0000-BFFFF uncachable
[    0.004934]   C0000-DFFFF write-protect
[    0.004935]   E0000-EFFFF write-through
[    0.004936]   F0000-FFFFF write-protect
[    0.004937] MTRR variable ranges enabled:
[    0.004939]   0 base 0C0000000 mask FC0000000 uncachable
[    0.004940]   1 base 000000000 mask E00000000 write-back
[    0.004941]   2 base 200000000 mask FC0000000 write-back
[    0.004942]   3 disabled
[    0.004943]   4 disabled
[    0.004944]   5 disabled
[    0.004944]   6 disabled
[    0.004945]   7 disabled
[    0.005868] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.005995] total RAM covered: 8192M
[    0.006629] Found optimal setting for mtrr clean up
[    0.006631]  gran_size: 64K    chunk_size: 64K    num_reg: 4     lose cover RAM: 0G
[    0.007508] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[    0.007514] last_pfn = 0xbff80 max_arch_pfn = 0x400000000
[    0.019563] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [(____ptrval____)]
[    0.024675] check: Scanning 1 areas for low memory corruption
[    0.024678] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[    0.024684] BRK [0x0c601000, 0x0c601fff] PGTABLE
[    0.024686] BRK [0x0c602000, 0x0c602fff] PGTABLE
[    0.024688] BRK [0x0c603000, 0x0c603fff] PGTABLE
[    0.024723] BRK [0x0c604000, 0x0c604fff] PGTABLE
[    0.024725] BRK [0x0c605000, 0x0c605fff] PGTABLE
[    0.024880] BRK [0x0c606000, 0x0c606fff] PGTABLE
[    0.024904] BRK [0x0c607000, 0x0c607fff] PGTABLE
[    0.024927] BRK [0x0c608000, 0x0c608fff] PGTABLE
[    0.024951] BRK [0x0c609000, 0x0c609fff] PGTABLE
[    0.025005] RAMDISK: [mem 0x30149000-0x3409bfff]
[    0.025017] ACPI: Early table checksum verification disabled
[    0.025102] ACPI: RSDP 0x00000000000FBCD0 000014 (v00 ACPIAM)
[    0.025106] ACPI: RSDT 0x00000000BFF80000 00003C (v01 A_M_I_ OEMRSDT  10000814 MSFT 00000097)
[    0.025113] ACPI: FACP 0x00000000BFF80200 000084 (v02 A_M_I_ OEMFACP  10000814 MSFT 00000097)
[    0.025120] ACPI: DSDT 0x00000000BFF80440 0090AA (v01 A0751  A0751077 00000077 INTL 20060113)
[    0.025124] ACPI: FACS 0x00000000BFF8E000 000040
[    0.025128] ACPI: APIC 0x00000000BFF80390 00006C (v01 A_M_I_ OEMAPIC  10000814 MSFT 00000097)
[    0.025132] ACPI: MCFG 0x00000000BFF80400 00003C (v01 A_M_I_ OEMMCFG  10000814 MSFT 00000097)
[    0.025136] ACPI: OEMB 0x00000000BFF8E040 000081 (v01 A_M_I_ AMI_OEM  10000814 MSFT 00000097)
[    0.025140] ACPI: HPET 0x00000000BFF894F0 000038 (v01 A_M_I_ OEMHPET  10000814 MSFT 00000097)
[    0.025144] ACPI: OSFR 0x00000000BFF89530 0000B0 (v01 A_M_I_ OEMOSFR  10000814 MSFT 00000097)
[    0.025156] ACPI: Local APIC address 0xfee00000
[    0.025248] No NUMA configuration found
[    0.025249] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[    0.025262] NODE_DATA(0) allocated [mem 0x23ffd2000-0x23fffcfff]
[    0.025595] Zone ranges:
[    0.025596]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.025597]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.025599]   Normal   [mem 0x0000000100000000-0x000000023fffffff]
[    0.025600]   Device   empty
[    0.025601] Movable zone start for each node
[    0.025604] Early memory node ranges
[    0.025606]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.025607]   node   0: [mem 0x0000000000100000-0x00000000bff7ffff]
[    0.025608]   node   0: [mem 0x0000000100000000-0x000000023fffffff]
[    0.025617] Zeroed struct page in unavailable ranges: 226 pages
[    0.025618] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
[    0.025620] On node 0 totalpages: 2096926
[    0.025621]   DMA zone: 64 pages used for memmap
[    0.025622]   DMA zone: 21 pages reserved
[    0.025623]   DMA zone: 3998 pages, LIFO batch:0
[    0.025747]   DMA32 zone: 12222 pages used for memmap
[    0.025748]   DMA32 zone: 782208 pages, LIFO batch:63
[    0.051528]   Normal zone: 20480 pages used for memmap
[    0.051530]   Normal zone: 1310720 pages, LIFO batch:63
[    0.093133] ACPI: PM-Timer IO Port: 0x808
[    0.093137] ACPI: Local APIC address 0xfee00000
[    0.093157] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.093160] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.093163] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.093164] ACPI: IRQ0 used by override.
[    0.093166] ACPI: IRQ9 used by override.
[    0.093168] Using ACPI (MADT) for SMP configuration information
[    0.093170] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.093179] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.093197] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.093198] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.093199] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.093200] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.093202] PM: Registered nosave memory: [mem 0xbff80000-0xbff8dfff]
[    0.093202] PM: Registered nosave memory: [mem 0xbff8e000-0xbffdffff]
[    0.093203] PM: Registered nosave memory: [mem 0xbffe0000-0xbfffffff]
[    0.093204] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
[    0.093205] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.093206] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[    0.093206] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.093209] [mem 0xc0000000-0xfedfffff] available for PCI devices
[    0.093210] Booting paravirtualized kernel on bare hardware
[    0.093215] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.093231] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
[    0.093238] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.093998] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
[    0.094006] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.094007] pcpu-alloc:
  • 0 1 2 3

[    0.094041] Built 1 zonelists, mobility grouping on.  Total pages: 2064139
[    0.094043] Policy zone: Normal
[    0.094045] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-20-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=1
[    0.114063] Calgary: detecting Calgary via BIOS EBDA area
[    0.114066] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.185251] Memory: 8091780K/8387704K available (14339K kernel code, 2335K rwdata, 4444K rodata, 2584K init, 5196K bss, 295924K reserved, 0K cma-reserved)
[    0.185447] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.185460] Kernel/User page tables isolation: enabled
[    0.185494] ftrace: allocating 41561 entries in 163 pages
[    0.210260] rcu: Hierarchical RCU implementation.
[    0.210263] rcu:    RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.210264]    Tasks RCU enabled.
[    0.210265] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.210266] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.214123] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.214333] vt handoff: transparent VT on vt#1
[    0.214341] Console: colour dummy device 80x25
[    0.214346] printk: console [tty0] enabled
[    0.214369] ACPI: Core revision 20181213
[    0.214564] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.214573] hpet clockevent registered
[    0.214579] APIC: Switch to symmetric I/O mode setup
[    0.214943] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.234578] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x22ac600e710, max_idle_ns: 440795254584 ns
[    0.234594] Calibrating delay loop (skipped), value calculated using timer frequency.. 4810.92 BogoMIPS (lpj=9621852)
[    0.234596] pid_max: default: 32768 minimum: 301
[    0.234643] LSM: Security Framework initializing
[    0.234659] Yama: becoming mindful.
[    0.234681] AppArmor: AppArmor initialized
[    0.238260] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.240277] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.240381] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.240448] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.240804] mce: CPU supports 6 MCE banks
[    0.240815] mce: CPU0: Thermal monitoring enabled (TM2)
[    0.240818] process: using mwait in idle threads
[    0.240824] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.240825] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.240828] Spectre V2 : Mitigation: Full generic retpoline
[    0.240828] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.240829] Speculative Store Bypass: Vulnerable
[    0.240872] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.241047] Freeing SMP alternatives memory: 36K
[    0.250580] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU           @ 2.40GHz (family: 0x6, model: 0xf, stepping: 0x7)
[    0.250580] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[    0.250580] core: PEBS disabled due to CPU errata
[    0.250580] ... version:                2
[    0.250580] ... bit width:              40
[    0.250580] ... generic registers:      2
[    0.250580] ... value mask:             000000ffffffffff
[    0.250580] ... max period:             000000007fffffff
[    0.250580] ... fixed-purpose events:   3
[    0.250580] ... event mask:             0000000700000003
[    0.250580] rcu: Hierarchical SRCU implementation.
[    0.250580] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.250580] smp: Bringing up secondary CPUs ...
[    0.250580] x86: Booting SMP configuration:
[    0.250580] .... node  #0, CPUs:      #1 #2 #3
[    0.258682] smp: Brought up 1 node, 4 CPUs
[    0.258682] smpboot: Max logical packages: 1
[    0.258682] smpboot: Total of 4 processors activated (19243.70 BogoMIPS)
[    0.263116] devtmpfs: initialized
[    0.263116] x86/mm: Memory block size: 128MB
[    0.263979] PM: Registering ACPI NVS region [mem 0xbff8e000-0xbffdffff] (335872 bytes)
[    0.263979] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.263979] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.263979] pinctrl core: initialized pinctrl subsystem
[    0.263979] RTC time: 14:42:41, date: 2019-07-12
[    0.263979] NET: Registered protocol family 16
[    0.263979] audit: initializing netlink subsys (disabled)
[    0.263979] audit: type=2000 audit(1562942561.048:1): state=initialized audit_enabled=0 res=1
[    0.263979] EISA bus registered
[    0.263979] cpuidle: using governor ladder
[    0.263979] cpuidle: using governor menu
[    0.263979] ACPI: bus type PCI registered
[    0.263979] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.263979] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.263979] PCI: not using MMCONFIG
[    0.263979] PCI: Using configuration type 1 for base access
[    0.268106] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.268106] ACPI: Added _OSI(Module Device)
[    0.268106] ACPI: Added _OSI(Processor Device)
[    0.268106] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.268106] ACPI: Added _OSI(Processor Aggregator Device)
[    0.268106] ACPI: Added _OSI(Linux-Dell-Video)
[    0.268106] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.268106] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.275920] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.279977] ACPI: Dynamic OEM Table Load:
[    0.279983] ACPI: SSDT 0xFFFF9EE5B615B000 0001D2 (v01 AMI    CPU1PM   00000001 INTL 20060113)
[    0.280508] ACPI: Dynamic OEM Table Load:
[    0.280513] ACPI: SSDT 0xFFFF9EE5B615B400 000143 (v01 AMI    CPU2PM   00000001 INTL 20060113)
[    0.283012] ACPI: Dynamic OEM Table Load:
[    0.283017] ACPI: SSDT 0xFFFF9EE5B60A5200 000143 (v01 AMI    CPU3PM   00000001 INTL 20060113)
[    0.283496] ACPI: Dynamic OEM Table Load:
[    0.283501] ACPI: SSDT 0xFFFF9EE5B60A4A00 000143 (v01 AMI    CPU4PM   00000001 INTL 20060113)
[    0.284059] ACPI: Interpreter enabled
[    0.284084] ACPI: (supports S0 S1 S3 S4 S5)
[    0.284085] ACPI: Using IOAPIC for interrupt routing
[    0.284127] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.284998] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.285016] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.285276] ACPI: Enabled 13 GPEs in block 00 to 3F
[    0.295546] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.295553] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.295559] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.295937] PCI host bridge to bus 0000:00
[    0.295940] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.295941] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.295943] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.295945] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.295947] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.295949] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.295959] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.296090] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[    0.296135] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.296272] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.296334] pci 0000:00:1a.0: reg 0x20: [io  0xb800-0xb81f]
[    0.296473] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.296515] pci 0000:00:1a.1: reg 0x20: [io  0xb880-0xb89f]
[    0.296656] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.296698] pci 0000:00:1a.2: reg 0x20: [io  0xbc00-0xbc1f]
[    0.296844] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.296865] pci 0000:00:1a.7: reg 0x10: [mem 0xfe7ffc00-0xfe7fffff]
[    0.296944] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.297063] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.297082] pci 0000:00:1b.0: reg 0x10: [mem 0xfe7f8000-0xfe7fbfff 64bit]
[    0.297150] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.297260] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.297333] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.297456] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.297528] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.297651] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[    0.297724] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.297847] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.297889] pci 0000:00:1d.0: reg 0x20: [io  0xb080-0xb09f]
[    0.298030] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.298071] pci 0000:00:1d.1: reg 0x20: [io  0xb400-0xb41f]
[    0.298213] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.298255] pci 0000:00:1d.2: reg 0x20: [io  0xb480-0xb49f]
[    0.298404] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.298425] pci 0000:00:1d.7: reg 0x10: [mem 0xfe7ff800-0xfe7ffbff]
[    0.298504] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.298621] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.298780] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.298859] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[    0.298864] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.298867] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[    0.298995] pci 0000:00:1f.2: [8086:2921] type 00 class 0x01018f
[    0.299010] pci 0000:00:1f.2: reg 0x10: [io  0xa000-0xa007]
[    0.299018] pci 0000:00:1f.2: reg 0x14: [io  0x9c00-0x9c03]
[    0.299025] pci 0000:00:1f.2: reg 0x18: [io  0x9880-0x9887]
[    0.299032] pci 0000:00:1f.2: reg 0x1c: [io  0x9800-0x9803]
[    0.299039] pci 0000:00:1f.2: reg 0x20: [io  0x9480-0x948f]
[    0.299046] pci 0000:00:1f.2: reg 0x24: [io  0x9400-0x940f]
[    0.299180] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.299197] pci 0000:00:1f.3: reg 0x10: [mem 0xfe7ff400-0xfe7ff4ff 64bit]
[    0.299216] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.299330] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[    0.299345] pci 0000:00:1f.5: reg 0x10: [io  0xb000-0xb007]
[    0.299353] pci 0000:00:1f.5: reg 0x14: [io  0xac00-0xac03]
[    0.299360] pci 0000:00:1f.5: reg 0x18: [io  0xa880-0xa887]
[    0.299367] pci 0000:00:1f.5: reg 0x1c: [io  0xa800-0xa803]
[    0.299374] pci 0000:00:1f.5: reg 0x20: [io  0xa480-0xa48f]
[    0.299381] pci 0000:00:1f.5: reg 0x24: [io  0xa400-0xa40f]
[    0.299554] pci 0000:01:00.0: [1002:67b1] type 00 class 0x030000
[    0.299593] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.299610] pci 0000:01:00.0: reg 0x18: [mem 0xcf800000-0xcfffffff 64bit pref]
[    0.299621] pci 0000:01:00.0: reg 0x20: [io  0xc000-0xc0ff]
[    0.299633] pci 0000:01:00.0: reg 0x24: [mem 0xfe880000-0xfe8bffff]
[    0.299644] pci 0000:01:00.0: reg 0x30: [mem 0xfe8c0000-0xfe8dffff pref]
[    0.299653] pci 0000:01:00.0: enabling Extended Tags
[    0.299749] pci 0000:01:00.0: supports D1 D2
[    0.299751] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.299809] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[    0.299879] pci 0000:01:00.1: [1002:aac8] type 00 class 0x040300
[    0.299913] pci 0000:01:00.1: reg 0x10: [mem 0xfe8fc000-0xfe8fffff 64bit]
[    0.299969] pci 0000:01:00.1: enabling Extended Tags
[    0.300039] pci 0000:01:00.1: supports D1 D2
[    0.300140] pci 0000:00:01.0: ASPM: current common clock configuration is broken, reconfiguring
[    0.300167] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.300169] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.300172] pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.300176] pci 0000:00:01.0:   bridge window [mem 0xcf800000-0xdfffffff 64bit pref]
[    0.300218] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.300227] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.300314] pci 0000:03:00.0: [197b:2363] type 00 class 0x010601
[    0.300429] pci 0000:03:00.0: reg 0x24: [mem 0xfeafe000-0xfeafffff]
[    0.300442] pci 0000:03:00.0: reg 0x30: [mem 0xfeae0000-0xfeaeffff pref]
[    0.300501] pci 0000:03:00.0: PME# supported from D3hot
[    0.300600] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[    0.300629] pci 0000:03:00.1: reg 0x10: [io  0xdc00-0xdc07]
[    0.300641] pci 0000:03:00.1: reg 0x14: [io  0xd880-0xd883]
[    0.300654] pci 0000:03:00.1: reg 0x18: [io  0xd800-0xd807]
[    0.300667] pci 0000:03:00.1: reg 0x1c: [io  0xd480-0xd483]
[    0.300680] pci 0000:03:00.1: reg 0x20: [io  0xd400-0xd40f]
[    0.300815] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.300825] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.300828] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.300832] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.300892] pci 0000:02:00.0: [1969:1048] type 00 class 0x020000
[    0.300923] pci 0000:02:00.0: reg 0x10: [mem 0xfe9c0000-0xfe9fffff 64bit]
[    0.300972] pci 0000:02:00.0: reg 0x30: [mem 0xfe9a0000-0xfe9bffff pref]
[    0.301032] pci 0000:02:00.0: PME# supported from D3hot D3cold
[    0.301112] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.301121] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.301126] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.301146] pci_bus 0000:05: extended config space not accessible
[    0.301180] pci 0000:05:03.0: [1106:3044] type 00 class 0x0c0010
[    0.301196] pci 0000:05:03.0: reg 0x10: [mem 0xfebff800-0xfebfffff]
[    0.301206] pci 0000:05:03.0: reg 0x14: [io  0xec00-0xec7f]
[    0.301274] pci 0000:05:03.0: supports D2
[    0.301276] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold
[    0.301365] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.301368] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.301372] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.301377] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.301379] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.301381] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.301382] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.301384] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[    0.302297] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    0.302393] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    0.302487] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.302585] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[    0.302679] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    0.302774] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    0.302868] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[    0.302962] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    0.303092] SCSI subsystem initialized
[    0.303092] libata version 3.00 loaded.
[    0.303092] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.303092] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.303092] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.303092] vgaarb: loaded
[    0.303092] ACPI: bus type USB registered
[    0.303092] usbcore: registered new interface driver usbfs
[    0.303092] usbcore: registered new interface driver hub
[    0.303092] usbcore: registered new device driver usb
[    0.303092] pps_core: LinuxPPS API ver. 1 registered
[    0.303092] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.303092] PTP clock support registered
[    0.303092] EDAC MC: Ver: 3.0.0
[    0.303092] PCI: Using ACPI for IRQ routing
[    0.307125] PCI: pci_cache_line_size set to 64 bytes
[    0.307188] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.307190] e820: reserve RAM buffer [mem 0xbff80000-0xbfffffff]
[    0.314582] NetLabel: Initializing
[    0.314582] NetLabel:  domain hash size = 128
[    0.314582] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.314582] NetLabel:  unlabeled traffic allowed by default
[    0.315325] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.315329] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.315333] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.318640] clocksource: Switched to clocksource tsc-early
[    0.338685] VFS: Disk quotas dquot_6.6.0
[    0.338710] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.338895] AppArmor: AppArmor Filesystem Enabled
[    0.338940] pnp: PnP ACPI init
[    0.339080] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.339087] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.339184] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.339457] system 00:02: [io  0x0290-0x0297] has been reserved
[    0.339463] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.339715] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.339717] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.339719] system 00:03: [io  0x0480-0x04bf] has been reserved
[    0.339722] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.339724] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.339726] system 00:03: [mem 0xfed50000-0xfed8ffff] has been reserved
[    0.339729] system 00:03: [mem 0xffa00000-0xffafffff] has been reserved
[    0.339731] system 00:03: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.339733] system 00:03: [mem 0xffe00000-0xffefffff] has been reserved
[    0.339736] system 00:03: [mem 0xfff00000-0xfffffffe] has been reserved
[    0.339741] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.340158] pnp 00:04: [dma 0 disabled]
[    0.340240] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.340365] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.340368] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.340374] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.340465] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.340562] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[    0.340568] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.340862] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.340865] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.340867] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.340869] system 00:08: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.340875] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.341082] pnp: PnP ACPI: found 9 devices
[    0.349132] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.349152] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.349156] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 400000 add_align 100000
[    0.349164] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.349171] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.349174] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.349189] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[    0.349194] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.349199] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.349201] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.349204] pci 0000:00:1c.5: BAR 13: assigned [io  0x2000-0x2fff]
[    0.349207] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.349210] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.349213] pci 0000:00:01.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.349216] pci 0000:00:01.0:   bridge window [mem 0xcf800000-0xdfffffff 64bit pref]
[    0.349220] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.349222] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.349227] pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc03fffff]
[    0.349230] pci 0000:00:1c.0:   bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.349235] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.349238] pci 0000:00:1c.4:   bridge window [io  0xd000-0xdfff]
[    0.349242] pci 0000:00:1c.4:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.349245] pci 0000:00:1c.4:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.349250] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.349253] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.349257] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.349260] pci 0000:00:1c.5:   bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.349266] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.349268] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.349272] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.349280] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.349281] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.349283] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.349285] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.349287] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xffffffff window]
[    0.349289] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.349290] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.349292] pci_bus 0000:01: resource 2 [mem 0xcf800000-0xdfffffff 64bit pref]
[    0.349294] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.349296] pci_bus 0000:04: resource 1 [mem 0xc0000000-0xc03fffff]
[    0.349297] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.349299] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.349301] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.349303] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[    0.349305] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.349306] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.349308] pci_bus 0000:02: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
[    0.349310] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.349312] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.349313] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.349315] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.349317] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.349319] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.349320] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xffffffff window]
[    0.349435] NET: Registered protocol family 2
[    0.349674] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.349738] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.349940] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.350239] TCP: Hash tables configured (established 65536 bind 65536)
[    0.350301] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.350386] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.350539] NET: Registered protocol family 1
[    0.350547] NET: Registered protocol family 44
[    0.351899] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.351911] pci 0000:01:00.1: Linked as a consumer to 0000:01:00.0
[    0.351920] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue
[    0.351925] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue
[    0.351935] PCI: CLS 32 bytes, default 64
[    0.352051] Unpacking initramfs...
[    1.466327] Freeing initrd memory: 64844K
[    1.466333] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.466335] software IO TLB: mapped [mem 0xbbf80000-0xbff80000] (64MB)
[    1.466696] check: Scanning for low memory corruption every 60 seconds
[    1.467630] Initialise system trusted keyrings
[    1.467644] Key type blacklist registered
[    1.467772] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.470238] zbud: loaded
[    1.470984] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.471364] fuse init (API version 7.28)
[    1.531807] Key type asymmetric registered
[    1.531809] Asymmetric key parser 'x509' registered
[    1.531828] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    1.531940] io scheduler mq-deadline registered
[    1.532367] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[    1.532592] pcieport 0000:00:1c.5: enabling device (0106 -> 0107)
[    1.532716] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.532800] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    1.532801] vesafb: scrolling: redraw
[    1.532803] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.532818] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 8128k, total 8128k
[    1.533005] Console: switching to colour frame buffer device 240x67
[    1.533055] fb0: VESA VGA frame buffer device
[    1.533072] intel_idle: does not run on family 6 model 15
[    1.533200] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.533211] ACPI: Power Button [PWRB]
[    1.533262] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.533278] ACPI: Power Button [PWRF]
[    1.533860] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.554285] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.558202] Linux agpgart interface v0.103
[    1.561882] loop: module loaded
[    1.562154] ata_piix 0000:00:1f.2: version 2.13
[    1.562289] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    1.563768] scsi host0: ata_piix
[    1.563974] scsi host1: ata_piix
[    1.564054] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[    1.564057] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[    1.564200] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.565550] scsi host2: ata_piix
[    1.565691] scsi host3: ata_piix
[    1.565746] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[    1.565749] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[    1.565963] libphy: Fixed MDIO Bus: probed
[    1.565964] tun: Universal TUN/TAP device driver, 1.6
[    1.566037] PPP generic driver version 2.4.2
[    1.566109] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.566126] ehci-pci: EHCI PCI platform driver
[    1.566269] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.566277] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.566288] ehci-pci 0000:00:1a.7: debug port 1
[    1.570179] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    1.570192] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[    1.582619] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.582698] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    1.582701] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.582704] usb usb1: Product: EHCI Host Controller
[    1.582707] usb usb1: Manufacturer: Linux 5.0.0-20-generic ehci_hcd
[    1.582709] usb usb1: SerialNumber: 0000:00:1a.7
[    1.582924] hub 1-0:1.0: USB hub found
[    1.582933] hub 1-0:1.0: 6 ports detected
[    1.583228] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.583234] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.583244] ehci-pci 0000:00:1d.7: debug port 1
[    1.587145] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    1.587156] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[    1.602629] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.602715] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    1.602718] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.602721] usb usb2: Product: EHCI Host Controller
[    1.602724] usb usb2: Manufacturer: Linux 5.0.0-20-generic ehci_hcd
[    1.602727] usb usb2: SerialNumber: 0000:00:1d.7
[    1.602920] hub 2-0:1.0: USB hub found
[    1.602927] hub 2-0:1.0: 6 ports detected
[    1.603130] ehci-platform: EHCI generic platform driver
[    1.603142] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.603145] ohci-pci: OHCI PCI platform driver
[    1.603158] ohci-platform: OHCI generic platform driver
[    1.603169] uhci_hcd: USB Universal Host Controller Interface driver
[    1.603262] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.603268] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.603274] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.603300] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    1.603352] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    1.603355] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.603356] usb usb3: Product: UHCI Host Controller
[    1.603358] usb usb3: Manufacturer: Linux 5.0.0-20-generic uhci_hcd
[    1.603360] usb usb3: SerialNumber: 0000:00:1a.0
[    1.603519] hub 3-0:1.0: USB hub found
[    1.603527] hub 3-0:1.0: 2 ports detected
[    1.603731] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.603737] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.603743] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.603772] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    1.603822] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    1.603824] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.603825] usb usb4: Product: UHCI Host Controller
[    1.603827] usb usb4: Manufacturer: Linux 5.0.0-20-generic uhci_hcd
[    1.603829] usb usb4: SerialNumber: 0000:00:1a.1
[    1.603988] hub 4-0:1.0: USB hub found
[    1.603995] hub 4-0:1.0: 2 ports detected
[    1.604190] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.604196] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.604202] uhci_hcd 0000:00:1a.2: detected 2 ports
[    1.604219] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    1.604270] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    1.604272] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.604274] usb usb5: Product: UHCI Host Controller
[    1.604275] usb usb5: Manufacturer: Linux 5.0.0-20-generic uhci_hcd
[    1.604277] usb usb5: SerialNumber: 0000:00:1a.2
[    1.604436] hub 5-0:1.0: USB hub found
[    1.604444] hub 5-0:1.0: 2 ports detected
[    1.604634] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.604640] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.604646] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.604662] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    1.604711] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    1.604713] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.604715] usb usb6: Product: UHCI Host Controller
[    1.604717] usb usb6: Manufacturer: Linux 5.0.0-20-generic uhci_hcd
[    1.604719] usb usb6: SerialNumber: 0000:00:1d.0
[    1.604878] hub 6-0:1.0: USB hub found
[    1.604887] hub 6-0:1.0: 2 ports detected
[    1.605090] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.605096] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.605102] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.605127] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    1.605179] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    1.605181] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.605183] usb usb7: Product: UHCI Host Controller
[    1.605184] usb usb7: Manufacturer: Linux 5.0.0-20-generic uhci_hcd
[    1.605186] usb usb7: SerialNumber: 0000:00:1d.1
[    1.605351] hub 7-0:1.0: USB hub found
[    1.605358] hub 7-0:1.0: 2 ports detected
[    1.605549] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.605558] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.605564] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.605580] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    1.605629] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    1.605632] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.605633] usb usb8: Product: UHCI Host Controller
[    1.605635] usb usb8: Manufacturer: Linux 5.0.0-20-generic uhci_hcd
[    1.605637] usb usb8: SerialNumber: 0000:00:1d.2
[    1.605795] hub 8-0:1.0: USB hub found
[    1.605802] hub 8-0:1.0: 2 ports detected
[    1.605988] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    1.605989] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.606495] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.606665] mousedev: PS/2 mouse device common for all mice
[    1.606967] rtc_cmos 00:01: RTC can wake from S4
[    1.607141] rtc_cmos 00:01: registered as rtc0
[    1.607184] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.607194] i2c /dev entries driver
[    1.607312] device-mapper: uevent: version 1.0.3
[    1.607426] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    1.607471] platform eisa.0: Probing EISA bus 0
[    1.607473] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.607475] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.607477] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.607479] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.607481] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.607483] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.607484] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.607486] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.607488] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.607490] platform eisa.0: EISA: Detected 0 cards
[    1.607572] ledtrig-cpu: registered to indicate activity on CPUs
[    1.607928] NET: Registered protocol family 10
[    1.615899] Segment Routing with IPv6
[    1.615927] NET: Registered protocol family 17
[    1.616011] Key type dns_resolver registered
[    1.616409] RAS: Correctable Errors collector initialized.
[    1.616466] microcode: sig=0x6f7, pf=0x10, revision=0x6a
[    1.616538] microcode: Microcode Update Driver: v2.2.
[    1.616557] sched_clock: Marking stable (1616253970, 274957)->(1801295537, -184766610)
[    1.616919] registered taskstats version 1
[    1.616932] Loading compiled-in X.509 certificates
[    1.619382] Loaded X.509 cert 'Build time autogenerated kernel key: b2727d876519a4357898ca573c5417d35b884960'
[    1.619406] zswap: loaded using pool lzo/zbud
[    1.626992] Key type big_key registered
[    1.626995] Key type trusted registered
[    1.630765] Key type encrypted registered
[    1.630778] AppArmor: AppArmor sha1 policy hashing enabled
[    1.630795] ima: No TPM chip found, activating TPM-bypass!
[    1.630799] ima: Allocated hash algorithm: sha1
[    1.630807] No architecture policies found
[    1.630820] evm: Initialising EVM extended attributes:
[    1.630821] evm: security.selinux
[    1.630822] evm: security.SMACK64
[    1.630822] evm: security.SMACK64EXEC
[    1.630823] evm: security.SMACK64TRANSMUTE
[    1.630824] evm: security.SMACK64MMAP
[    1.630825] evm: security.apparmor
[    1.630825] evm: security.ima
[    1.630826] evm: security.capability
[    1.630827] evm: HMAC attrs: 0x1
[    1.631324]   Magic number: 11:77:738
[    1.631478] rtc_cmos 00:01: setting system clock to 2019-07-12T14:42:42 UTC (1562942562)
[    1.887878] ata2: SATA link down (SStatus 0 SControl 300)
[    1.892227] ata4: SATA link down (SStatus 0 SControl 300)
[    1.938614] usb 2-2: new high-speed USB device number 2 using ehci-pci
[    2.046692] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.049012] ata1.00: ATA-10: WDC WD10EZEX-60WN4A0, 01.01A01, max UDMA/100
[    2.049016] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.050720] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.051570] ata1.00: configured for UDMA/100
[    2.051753] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EZEX-60W 1A01 PQ: 0 ANSI: 5
[    2.052006] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.052054] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.052057] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.052078] sd 0:0:0:0: [sda] Write Protect is off
[    2.052081] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.052126] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.063865]  sda: sda1
[    2.064463] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.070753] ata3.00: ATAPI: HL-DT-ST DVD-RAM GH15L, RA04, max UDMA/100
[    2.094729] ata3.00: configured for UDMA/100
[    2.126614] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    2.210260] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH15L    RA04 PQ: 0 ANSI: 5
[    2.334294] usb 3-1: New USB device found, idVendor=046d, idProduct=089d, bcdDevice= 1.00
[    2.334297] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.358948] usb 2-2: New USB device found, idVendor=0bda, idProduct=0181, bcdDevice=81.97
[    2.358952] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.358954] usb 2-2: Product: USB2.0-CRW
[    2.358957] usb 2-2: Manufacturer: Generic
[    2.358960] usb 2-2: SerialNumber: 20060413092100000
[    2.380075] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.380077] cdrom: Uniform CD-ROM driver Revision: 3.20

Nicht den Textinhalt hier hochladen, die komplette Datei  besser anhängen. Die Ausgabe scheint auch unvollständig zu sein, bereits bei Zeitstempel ...
[    2.380077] cdrom: Uniform CD-ROM driver Revision: 3.20... ist schon Schluss. Es fehlt also einiges und eine längere Pause ist so auch nicht erkennbar.

Ob der Grafiktreiber hier korrekt ist, würde ich einfach mit einer aktuellen Live-Version direkt von USB-Stick gegenprüfen und dann abfragen:
inxi -FMöglicherweise ist dein System ja stärker beschädigt. Wenn das System beim einfach Verschieben von Grafiksymbolen abstürzt, liegt das sehr wahrscheinlich an der Grafikkarte/Treiber.

Ein Livesystem mit einem LM19 habe ich auf einer anderen Festplatte. Ich werde es mal überprüfen und berichten.

Aber was meinst Du was der "ehtron" mit dem hier meinte: so wie du das bescheibst wird auch das netzteil gern genommen..

Habe jetzt mal die Gegenprüfung gemacht. Aber es war das System LM18/3.

peter@peter-P5K ~ $ inxi-F
inxi-F: Befehl nicht gefunden.
peter@peter-P5K ~ $ inxi -F
System:    Host: peter-P5K Kernel: 4.15.0-51-generic x86_64 (64 bit)
           Desktop: Cinnamon 3.6.7  Distro: Linux Mint 18.3 Sylvia
Machine:   Mobo: ASUSTeK model: P5K v: Rev 1.xx
           Bios: American Megatrends v: 1201 date: 10/14/2008
CPU:       Quad core Intel Core2 Quad (-MCP-) cache: 4096 KB
           clock speeds: max: 2394 MHz 1: 1603 MHz 2: 1603 MHz 3: 1605 MHz
           4: 1615 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Hawaii PRO [Radeon R9 290/390]
           Display Server: X.Org 1.18.4 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1920x1080@60.00hz
           GLX Renderer: AMD HAWAII (DRM 2.50.0 / 4.15.0-51-generic, LLVM 6.0.0)
           GLX Version: 3.0 Mesa 18.0.5
Audio:     Card-1 Advanced Micro Devices [AMD/ATI] Hawaii HDMI Audio [Radeon R9 290/290X / 390/390X]
           driver: snd_hda_intel
           Card-2 Intel 82801I (ICH9 Family) HD Audio Controller
           driver: snd_hda_intel
           Card-3 Logitech QuickCam E2500 series driver: USB Audio
           Sound: Advanced Linux Sound Architecture v: k4.15.0-51-generic
Network:   Card: Qualcomm Atheros Attansic L1 Gigabit Ethernet driver: atl1
           IF: enp2s0 state: up speed: 100 Mbps duplex: full
           mac: 00:1e:8c:b4:9f:8c
Drives:    HDD Total Size: 160.0GB (9.2% used)
           ID-1: /dev/sda model: Hitachi_HDS72101 size: 160.0GB
Partition: ID-1: / size: 139G used: 6.0G (5%) fs: ext4 dev: /dev/dm-0
           ID-2: /boot size: 472M used: 135M (31%) fs: ext2 dev: /dev/sda1
           ID-3: swap-1 size: 8.59GB used: 0.00GB (0%) fs: swap dev: /dev/dm-1
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 40.0C mobo: 43.0C gpu: 36.0
           Fan Speeds (in rpm): cpu: 975 psu: 0 sys-1: 0 sys-2: 1371
Info:      Processes: 207 Uptime: 4 min Memory: 663.9/7976.5MB
           Client: Shell (bash) inxi: 2.2.35

Aktuell wäre jetzt eher ein Buntu 19.04 und nicht ein auf Buntu 16.04 basierendes Mint 18.x, auch wenn ein neuerer Kernel installiert ist → https://wiki.ubuntuusers.de/Downloads/Disco_Dingo/

Vielleicht schon bekannt, nur als Info, vielleicht hilfreich:

Die verwendete Grafikkarte Hawaii PRO [Radeon R9 290/390] wird von amdgpu unterstützt, was aus den folgenden links hervorgeht:

https://wiki.archlinux.org/index.php/AMDGPU#Enable_Southern_Islands_(SI)_and_Sea_Islands_(CIK)_support

https://www.x.org/wiki/RadeonFeature/#index5h2

https://wiki.ubuntuusers.de/Grafikkarten/AMD/radeon/

Die Karte gehört zu den "Sea Islands"