0 Mitglieder und 2 Gäste betrachten dieses Thema.
Leerzeichen auf keinen Fall im systemrelevanten Usernamen! Und kein Großbuchstabe.https://wiki.ubuntuusers.de/Benutzer_und_Gruppen/#Namenskonventionen
Gilt diese Aussage auch für mögliche FP-Bezeichnungen?
desktop@mint-desktop ~ $ journalctl --since "15 min ago"-- Logs begin at Do 2019-03-07 11:04:52 CET, end at Do 2019-03-07 17:05:52 CET. --Mär 07 16:59:30 mint-desktop ll[12898]: libostree pull from 'flathub' for appstream2/x86_64 complete security: GPG: summary+commit http: TLS non-delta: meta: 2 content: 0 transfer: secs: 3 size: 791 BytesMär 07 16:59:34 mint-desktop ll[12898]: libostree pull from 'flathub' for appstream2/x86_64 complete security: GPG: summary+commit http: TLS non-delta: meta: 2 content: 1 transfer: secs: 3 size: 1,6 MBMär 07 16:59:34 mint-desktop dbus[1074]: [system] Activating via systemd: service name='org.freedesktop.Flatpak.SystemHelper' unit='flatpak-systeMär 07 16:59:34 mint-desktop systemd[1]: Starting flatpak system helper...Mär 07 16:59:34 mint-desktop dbus[1074]: [system] Successfully activated service 'org.freedesktop.Flatpak.SystemHelper'Mär 07 16:59:34 mint-desktop systemd[1]: Started flatpak system helper.Mär 07 17:00:14 mint-desktop dbus[1074]: [system] Activating service name='org.debian.apt' (using servicehelper)Mär 07 17:00:14 mint-desktop AptDaemon[13021]: INFO: Initializing daemonMär 07 17:00:14 mint-desktop org.debian.apt[1074]: 17:00:14 AptDaemon [INFO]: Initializing daemonMär 07 17:00:14 mint-desktop dbus[1074]: [system] Successfully activated service 'org.debian.apt'Mär 07 17:00:14 mint-desktop AptDaemon.PackageKit[13021]: INFO: Initializing PackageKit compat layerMär 07 17:00:14 mint-desktop org.debian.apt[1074]: /usr/lib/python3/dist-packages/aptdaemon/worker/pkworker.py:35: PyGIWarning: PackageKitGlib waMär 07 17:00:14 mint-desktop org.debian.apt[1074]: from gi.repository import PackageKitGlib as pkMär 07 17:00:14 mint-desktop org.debian.apt[1074]: 17:00:14 AptDaemon.PackageKit [INFO]: Initializing PackageKit compat layerMär 07 17:00:14 mint-desktop AptDaemon[13021]: INFO: RemovePackages() was called: 'dbus.Array([dbus.String('gnome-mahjongg')], signature=dbus.SigMär 07 17:00:14 mint-desktop org.debian.apt[1074]: 17:00:14 AptDaemon [INFO]: RemovePackages() was called: 'dbus.Array([dbus.String('gnome-mahjonMär 07 17:00:14 mint-desktop AptDaemon.Trans[13021]: INFO: Simulate was calledMär 07 17:00:14 mint-desktop org.debian.apt[1074]: 17:00:14 AptDaemon.Trans [INFO]: Simulate was calledMär 07 17:00:14 mint-desktop org.debian.apt[1074]: 17:00:14 AptDaemon.Worker [INFO]: Simulating trans: /org/debian/apt/transaction/4d0980a2fbfe4bMär 07 17:00:14 mint-desktop AptDaemon.Worker[13021]: INFO: Simulating trans: /org/debian/apt/transaction/4d0980a2fbfe4b588f205f4c21f5f847Mär 07 17:00:15 mint-desktop AptDaemon.Worker[13021]: INFO: Committing packages: dbus.Array([], signature=dbus.Signature('s')), dbus.Array([], siMär 07 17:00:15 mint-desktop org.debian.apt[1074]: 17:00:15 AptDaemon.Worker [INFO]: Committing packages: dbus.Array([], signature=dbus.SignatureMär 07 17:00:15 mint-desktop AptDaemon.Trans[13021]: INFO: Queuing transaction /org/debian/apt/transaction/4d0980a2fbfe4b588f205f4c21f5f847Mär 07 17:00:15 mint-desktop org.debian.apt[1074]: 17:00:15 AptDaemon.Trans [INFO]: Queuing transaction /org/debian/apt/transaction/4d0980a2fbfe4Mär 07 17:00:24 mint-desktop polkit-agent-helper-1[13026]: pam_ecryptfs: pam_sm_authenticate: /home/desktop is already mountedMär 07 17:00:24 mint-desktop polkitd(authority=local)[1202]: Operator of unix-session:c2 successfully authenticated as unix-user:desktop to gain Mär 07 17:00:24 mint-desktop AptDaemon.Worker[13021]: INFO: Processing transaction /org/debian/apt/transaction/4d0980a2fbfe4b588f205f4c21f5f847Mär 07 17:00:24 mint-desktop org.debian.apt[1074]: 17:00:24 AptDaemon.Worker [INFO]: Processing transaction /org/debian/apt/transaction/4d0980a2fMär 07 17:00:28 mint-desktop AptDaemon.Worker[13021]: INFO: Finished transaction /org/debian/apt/transaction/4d0980a2fbfe4b588f205f4c21f5f847Mär 07 17:00:28 mint-desktop org.debian.apt[1074]: /usr/lib/python3/dist-packages/aptdaemon/progress.py:491: Warning: Source ID 40 was not found Mär 07 17:00:28 mint-desktop org.debian.apt[1074]: GLib.source_remove(id)Mär 07 17:00:28 mint-desktop org.debian.apt[1074]: /usr/lib/python3/dist-packages/aptdaemon/progress.py:491: Warning: Source ID 41 was not found Mär 07 17:00:28 mint-desktop org.debian.apt[1074]: GLib.source_remove(id)Mär 07 17:00:28 mint-desktop org.debian.apt[1074]: 17:00:28 AptDaemon.Worker [INFO]: Finished transaction /org/debian/apt/transaction/4d0980a2fbfMär 07 17:04:55 mint-desktop smartd[1089]: Device: /dev/sdc [SAT], SMART Usage Attribute: 194 Temperature_Celsius changed from 112 to 111Mär 07 17:05:27 mint-desktop dbus[1074]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'Mär 07 17:05:28 mint-desktop kernel: chromium-browse[13691]: segfault at 7f6811b961c0 ip 00007f6811b961c0 sp 00007ffc1069a958 error 14 in libGLESMär 07 17:05:28 mint-desktop gnome-keyring-daemon[1699]: asked to register item /org/freedesktop/secrets/collection/login/1, but it's already regMär 07 17:05:29 mint-desktop gnome-keyring-daemon[1699]: asked to register item /org/freedesktop/secrets/collection/login/1, but it's already regMär 07 17:05:52 mint-desktop dbus[1074]: [system] Failed to activate service 'org.bluez': timed out
desktop@mint-desktop ~ $ dmesg | tail[13685.228594] ata6.00: failed command: READ DMA EXT[13685.228599] ata6.00: cmd 25/00:08:00:08:1b/00:00:12:00:00/e0 tag 21 dma 4096 in res 61/04:08:00:08:1b/00:00:12:00:00/e0 Emask 0x1 (device error)[13685.228602] ata6.00: status: { DRDY DF ERR }[13685.228604] ata6.00: error: { ABRT }[13685.229229] ata6.00: failed to enable AA (error_mask=0x1)[13685.230171] ata6.00: failed to enable AA (error_mask=0x1)[13685.230176] ata6.00: configured for UDMA/133 (device error ignored)[13685.230226] ata6: EH complete[21667.650113] chromium-browse[13691]: segfault at 7f6811b961c0 ip 00007f6811b961c0 sp 00007ffc1069a958 error 14 in libGLESv2.so[7f6811b62000+1ff000]
desktop@mint-desktop ~ $ sudo smartctl -a /dev/sdd[sudo] Passwort für desktop: smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.15.0-42-generic] (local build)Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org=== START OF INFORMATION SECTION ===Model Family: Western Digital GreenDevice Model: WDC WD20EZRX-00DC0B0Serial Number: WD-WMC1T1445592LU WWN Device Id: 5 0014ee 0ae261b20Firmware Version: 80.00A80User Capacity: 2.000.398.934.016 bytes [2,00 TB]Sector Sizes: 512 bytes logical, 4096 bytes physicalDevice is: In smartctl database [for details use: -P show]ATA Version is: ACS-2 (minor revision not indicated)SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)Local Time is: Thu Mar 7 17:10:25 2019 CETSMART support is: Available - device has SMART capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled.Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run.Total time to complete Offline data collection: (28020) seconds.Offline data collectioncapabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported.SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer.Error logging capability: (0x01) Error logging supported. General Purpose Logging supported.Short self-test routine recommended polling time: ( 2) minutes.Extended self-test routinerecommended polling time: ( 283) minutes.Conveyance self-test routinerecommended polling time: ( 5) minutes.SCT capabilities: (0x70b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported.SMART Attributes Data Structure revision number: 16Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 68 3 Spin_Up_Time 0x0027 178 178 021 Pre-fail Always - 6066 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1223 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 6783 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1203192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 623193 Load_Cycle_Count 0x0032 197 197 000 Old_age Always - 11592194 Temperature_Celsius 0x0022 113 101 000 Old_age Always - 37196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0SMART Error Log Version: 1Warning: ATA error count 15998 inconsistent with error log pointer 4ATA Error Count: 15998 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX]Powered_Up_Time is measured from power on, and printed asDDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,SS=sec, and sss=millisec. It "wraps" after 49.710 days.Error 15998 occurred at disk power-on lifetime: 6690 hours (278 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 02 00 00 00 a0 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ef 10 02 00 00 00 a0 08 05:21:40.595 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 a0 08 05:21:40.595 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 05:21:40.595 SET FEATURES [Set transfer mode] ef 10 02 00 00 00 a0 08 05:21:40.594 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 a0 08 05:21:40.594 IDENTIFY DEVICEError 15997 occurred at disk power-on lifetime: 6690 hours (278 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 46 00 00 00 a0 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ef 03 46 00 00 00 a0 08 05:21:40.595 SET FEATURES [Set transfer mode] ef 10 02 00 00 00 a0 08 05:21:40.594 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 a0 08 05:21:40.594 IDENTIFY DEVICE ef 10 02 00 00 00 a0 08 05:21:40.571 SET FEATURES [Enable SATA feature]Error 15996 occurred at disk power-on lifetime: 6690 hours (278 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 02 00 00 00 a0 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ef 10 02 00 00 00 a0 08 05:21:40.594 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 a0 08 05:21:40.594 IDENTIFY DEVICE ef 10 02 00 00 00 a0 08 05:21:40.571 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 a0 08 05:21:40.571 IDENTIFY DEVICEError 15995 occurred at disk power-on lifetime: 6690 hours (278 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 02 00 00 00 a0 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ef 10 02 00 00 00 a0 08 05:21:40.571 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 a0 08 05:21:40.571 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 05:21:40.571 SET FEATURES [Set transfer mode] ef 10 02 00 00 00 a0 08 05:21:40.570 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 a0 08 05:21:40.570 IDENTIFY DEVICEError 15994 occurred at disk power-on lifetime: 6690 hours (278 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 46 00 00 00 a0 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ef 03 46 00 00 00 a0 08 05:21:40.571 SET FEATURES [Set transfer mode] ef 10 02 00 00 00 a0 08 05:21:40.570 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 a0 08 05:21:40.570 IDENTIFY DEVICE ef 10 02 00 00 00 a0 08 05:21:40.547 SET FEATURES [Enable SATA feature]SMART Self-test log structure revision number 1Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error# 1 Short offline Completed without error 00% 6597 -SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testingSelective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.
desktop@mint-desktop ~ $ sudo smartctl -a /dev/sdesmartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.15.0-42-generic] (local build)Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org=== START OF INFORMATION SECTION ===Model Family: Western Digital GreenDevice Model: WDC WD20EZRX-00DC0B0Serial Number: WD-WMC1T1216440LU WWN Device Id: 5 0014ee 058d08878Firmware Version: 80.00A80User Capacity: 2.000.398.934.016 bytes [2,00 TB]Sector Sizes: 512 bytes logical, 4096 bytes physicalDevice is: In smartctl database [for details use: -P show]ATA Version is: ACS-2 (minor revision not indicated)SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)Local Time is: Thu Mar 7 17:10:39 2019 CETSMART support is: Available - device has SMART capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled.Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run.Total time to complete Offline data collection: (27720) seconds.Offline data collectioncapabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported.SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer.Error logging capability: (0x01) Error logging supported. General Purpose Logging supported.Short self-test routine recommended polling time: ( 2) minutes.Extended self-test routinerecommended polling time: ( 280) minutes.Conveyance self-test routinerecommended polling time: ( 5) minutes.SCT capabilities: (0x70b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported.SMART Attributes Data Structure revision number: 16Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 174 174 021 Pre-fail Always - 6275 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2308 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 7050 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1001192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 475193 Load_Cycle_Count 0x0032 196 196 000 Old_age Always - 12368194 Temperature_Celsius 0x0022 112 101 000 Old_age Always - 38196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0SMART Error Log Version: 1Warning: ATA error count 6652 inconsistent with error log pointer 1ATA Error Count: 6652 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX]Powered_Up_Time is measured from power on, and printed asDDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,SS=sec, and sss=millisec. It "wraps" after 49.710 days.Error 6652 occurred at disk power-on lifetime: 7048 hours (293 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 02 00 00 00 a0 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ef 10 02 00 00 00 a0 08 03:48:11.155 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 a0 08 03:48:11.155 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 03:48:11.155 SET FEATURES [Set transfer mode] ef 10 02 00 00 00 a0 08 03:48:11.154 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 a0 08 03:48:11.154 IDENTIFY DEVICEError 6651 occurred at disk power-on lifetime: 7048 hours (293 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 46 00 00 00 a0 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ef 03 46 00 00 00 a0 08 03:48:11.155 SET FEATURES [Set transfer mode] ef 10 02 00 00 00 a0 08 03:48:11.154 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 a0 08 03:48:11.154 IDENTIFY DEVICE ef 10 02 00 00 00 a0 08 03:48:11.135 SET FEATURES [Enable SATA feature]Error 6650 occurred at disk power-on lifetime: 7048 hours (293 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 02 00 00 00 a0 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ef 10 02 00 00 00 a0 08 03:48:11.154 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 a0 08 03:48:11.154 IDENTIFY DEVICE ef 10 02 00 00 00 a0 08 03:48:11.135 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 a0 08 03:48:11.135 IDENTIFY DEVICEError 6649 occurred at disk power-on lifetime: 7048 hours (293 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 02 00 00 00 a0 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ef 10 02 00 00 00 a0 08 03:48:11.135 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 a0 08 03:48:11.135 IDENTIFY DEVICE ef 03 46 00 00 00 a0 08 03:48:11.135 SET FEATURES [Set transfer mode] ef 10 02 00 00 00 a0 08 03:48:11.134 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 a0 08 03:48:11.134 IDENTIFY DEVICEError 6648 occurred at disk power-on lifetime: 7048 hours (293 days + 16 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 61 46 00 00 00 a0 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ef 03 46 00 00 00 a0 08 03:48:11.135 SET FEATURES [Set transfer mode] ef 10 02 00 00 00 a0 08 03:48:11.134 SET FEATURES [Enable SATA feature] ec 00 00 00 00 00 a0 08 03:48:11.134 IDENTIFY DEVICE ef 10 02 00 00 00 a0 08 03:48:11.111 SET FEATURES [Enable SATA feature]SMART Self-test log structure revision number 1Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error# 1 Short offline Completed without error 00% 6853 -SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testingSelective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.
sudo -H krusader