Willkommen Gast. Bitte einloggen oder registrieren. Haben Sie Ihre Aktivierungs E-Mail übersehen?
23.02.2019, 19:09:44

.
Einloggen mit Benutzername, Passwort und Sitzungslänge

Mitglieder
  • Mitglieder insgesamt: 21590
  • Letzte: oncarlos
Statistiken
  • Beiträge insgesamt: 575427
  • Themen insgesamt: 46617
  • Heute online: 576
  • Am meisten online: 992
  • (17.11.2018, 20:17:55)
Benutzer Online

Autor Thema: [gelöst]  Error bei boot beheben  (Gelesen 376 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

[gelöst] Error bei boot beheben
« am: 04.02.2019, 11:07:27 »
weakbit@compaq6510b:~$ sudo uname -a
[sudo] Passwort für weakbit:
Linux compaq6510b 4.19.0-0.bpo.1-amd64 #1 SMP Debian 4.19.12-1~bpo9+1 (2018-12-30) x86_64 GNU/Linux
hardware:
weakbit@compaq6510b:/var/log/installer$ sudo dmidecode
[sudo] Passwort für weakbit:
# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.4 present.
25 structures occupying 1236 bytes.
Table at 0x000F2AA9.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Hewlett-Packard
Version: 68DDU Ver. F.16
Release Date: 08/09/2010
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 1024 kB
Characteristics:
PCI is supported
PC Card (PCMCIA) is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
3.5"/720 kB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
Smart battery is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 15.22
Firmware Revision: 113.46

Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Hewlett-Packard
Product Name: HP Compaq 6510b (GB867ET#ABD)
Version: F.16
Serial Number: CNU7240CK7
UUID: 35791AED-CF15-E011-0C90-6D990E299D29
Wake-up Type: Power Switch
SKU Number: GB867ET#ABD
Family: 103C_5336AN

Handle 0x0040, DMI type 126, 34 bytes
Inactive

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: Hewlett-Packard
Product Name: 30C0
Version: KBC Version 71.2E
Serial Number: Not Specified

Handle 0x0003, DMI type 3, 13 bytes
Chassis Information
Manufacturer: Hewlett-Packard
Type: Notebook
Lock: Not Present
Version: Not Specified
Serial Number: CNU7240CK7
Asset Tag: CNU7240CK7
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: External Interface Enabled

Handle 0x0041, DMI type 126, 32 bytes
Inactive

Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: U10
Type: Central Processor
Family: Pentium M
Manufacturer: Intel(R)
ID: FD 06 00 00 FF FB EB BF
Signature: Type 0, Family 6, Model 15, Stepping 13
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Core(TM)2 Duo CPU     T7100  @ 1.80GHz
Voltage: 1.1 V
External Clock: 200 MHz
Max Speed: 1800 MHz
Current Speed: 1800 MHz
Status: Populated, Enabled
Upgrade: None
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: Not Provided
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified

Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 64 kB
Maximum Size: 64 kB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: Unknown
System Type: Unified
Associativity: 4-way Set-associative

Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: External
Installed Size: 2048 kB
Maximum Size: 2048 kB
Supported SRAM Types:
Burst
Installed SRAM Type: Burst
Speed: Unknown
Error Correction Type: None
System Type: Unified
Associativity: 4-way Set-associative

Handle 0x0007, DMI type 9, 13 bytes
System Slot Information
Designation: PC CARD-Slot 0
Type: 32-bit PC Card (PCMCIA)
Current Usage: Available
Length: Short
ID: Adapter 0, Socket 0
Characteristics:
5.0 V is provided
3.3 V is provided
PC Card-16 is supported
Cardbus is supported
PME signal is supported

Handle 0x0008, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: 8

Handle 0x0009, DMI type 11, 5 bytes
OEM Strings
String 1: www.hp.com
String 2: ABS 70/71 79 7A 7B 7C

Handle 0x000A, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: No Error
Number Of Devices: 2

Handle 0x000B, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: SODIMM
Set: None
Locator: DIMM #1
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 667 MHz
Manufacturer: Hyundai Electronics     
Serial Number: 04004023
Asset Tag: Not Specified
Part Number: HYMP512S64CP8-Y5 

Handle 0x000C, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: No Error
Total Width: 64 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: SODIMM
Set: None
Locator: DIMM #2
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 975 MHz
Manufacturer: Samsung                 
Serial Number: 97B8C4F5
Asset Tag: Not Specified
Part Number: M4 70T5663QZ3-CF7

Handle 0x000D, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000BFFFFFFF
Range Size: 3 GB
Physical Array Handle: 0x000A
Partition Width: 2

Handle 0x000E, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x000B
Memory Array Mapped Address Handle: 0x000D
Partition Row Position: 1

Handle 0x000F, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x000BFFFFFFF
Range Size: 2 GB
Physical Device Handle: 0x000C
Memory Array Mapped Address Handle: 0x000D
Partition Row Position: 2

Handle 0x0010, DMI type 22, 26 bytes
Portable Battery
Location: Primary
Manufacturer: Hewlett-Packard
Manufacture Date: 10/19/2007
Serial Number: 05124       
Name: HP               
Chemistry: Lithium Ion
Design Capacity: 51000 mWh
Design Voltage: 10800 mV
SBDS Version: Not Specified
Maximum Error: Unknown
OEM-specific Information: 0x00000000

Handle 0x0011, DMI type 126, 26 bytes
Inactive

Handle 0x0012, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected

Handle 0x0085, DMI type 133, 34 bytes
OEM-specific Type
Header and Data:
85 22 85 00 01 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00
00 00
Strings:
               
No battery       

Handle 0x0086, DMI type 134, 34 bytes
OEM-specific Type
Header and Data:
86 22 86 00 01 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 00
00 00
Strings:
               
                 

Handle 0x0013, DMI type 144, 26 bytes
OEM-specific Type
Header and Data:
90 1A 13 00 FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF 00 00

Handle 0x0014, DMI type 127, 4 bytes
End Of Table

dmesg | grep -i error
weakbit@compaq6510b:/var/log/installer$ sudo dmesg|grep -i error
[sudo] Passwort für weakbit:
[    6.319208] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    8.929436] tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us
[   19.803251] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:34:pipe A] flip_done timed out
[   30.043292] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:34:pipe A] flip_done timed out
[   40.283266] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
[   51.035228] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
[   61.275270] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
[   71.515268] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
[   81.755309] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
[   91.995346] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
[  102.235268] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
[  113.243306] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
[  123.483251] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
[  133.727257] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
[  143.967293] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
[  154.207309] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
[  164.447292] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
[  273.759289] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
[  283.999303] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
[  294.239288] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out
[  304.731260] [drm:drm_atomic_helper_wait_for_flip_done [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
[  314.971292] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CRTC:41:pipe B] flip_done timed out
[  325.215319] [drm:drm_atomic_helper_wait_for_dependencies [drm_kms_helper]] *ERROR* [CONNECTOR:50:SVIDEO-1] flip_done timed out

wie bekomme ich nun diese errors weg?
Das 2GB RAM 975MHz und das alte 1GB RAM 667MHz ich hatte keinen zweiten 2GB Stein möchte aber einen bestellen. Kann sein das zwei
unterschiedlichen RAMs nicht zusammen passen. Den Akku werde ich auch nachkaufen das der alte Krenmpel perfekt ist.

Danke
weakbit
« Letzte Änderung: 05.02.2019, 20:53:38 von weakbit »

Re: Error bei boot beheben
« Antwort #1 am: 04.02.2019, 11:36:28 »
Hallo,

Ein inxi -Fzsagt bestimmt mehr aus!?

Re: Error bei boot beheben
« Antwort #2 am: 04.02.2019, 11:58:07 »
hier scheint es eine Lösung zum "Error" zu geben
https://forum.ubuntuusers.de/topic/fehler-flip-done-timed-out-verlangsamt-boot/
Demnach liegt es wohl an der Grafik und nicht am RAM

Re: Error bei boot beheben
« Antwort #3 am: 04.02.2019, 21:11:36 »
@billyfox05 - DANKE!
erstaunlich an dem ist es gelegen aber wie kann man da draufkommen wenn man das so gut wie nie hat so ein Problem jetzt startet das Ding wieder ganz normal aber er hat noch ERRORs aber welche - hahaha

was das inxi -Fz bringe n soll gegenüber dem HW Ausdruck was ich gepostet habe weiß ich nicht aber bitte:

inxi -Fz steht nicht mal mehr drin -  :o
weakbit@compaq6510b:/var/log/installer$ sudo inxi -Fz
System:    Host: compaq6510b Kernel: 4.19.0-0.bpo.1-amd64 x86_64 (64 bit) Desktop: Xfce 4.12.3
           Distro: Debian GNU/Linux 9 (stretch)
Machine:   Device: laptop System: Hewlett-Packard product: HP Compaq 6510b (GB867ET#ABD) v: F.16
           Mobo: Hewlett-Packard model: 30C0 v: KBC Version 71.2E
           BIOS: Hewlett-Packard v: 68DDU Ver. F.16 date: 08/09/2010
Battery    C23B: charge: 645.5 Wh 6455300.0% condition: 0.0/0.0 Wh (100%)
CPU:       Dual core Intel Core2 Duo T7100 (-MCP-) cache: 2048 KB
           clock speeds: max: 1800 MHz 1: 931 MHz 2: 912 MHz
Graphics:  Card: Intel Mobile GM965/GL960 Integrated Graphics Controller (primary)
           Display Server: X.org 1.19.2 drivers: modesetting (unloaded: fbdev,vesa)
           tty size: 126x34 Advanced Data: N/A for root
Audio:     Card Intel 82801H (ICH8 Family) HD Audio Controller driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.19.0-0.bpo.1-amd64
Network:   Card-1: Intel PRO/Wireless 3945ABG [Golan] Network Connection driver: iwl3945
           IF: wlp16s0 state: up mac: <filter>
           Card-2: Broadcom Limited NetLink BCM5787M Gigabit Ethernet PCI Express driver: tg3
           IF: ens1 state: down mac: <filter>
Drives:    HDD Total Size: 250.1GB (3.0% used)
           ID-1: /dev/sda model: ST9250410AS size: 250.1GB
Partition: ID-1: / size: 226G used: 4.1G (2%) fs: ext4 dev: /dev/sda1
           ID-2: swap-1 size: 3.21GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
Sensors:   System Temperatures: cpu: 45.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 145 Uptime: 8 min Memory: 763.6/2995.2MB Client: Shell (sudo) inxi: 2.3.5



« Letzte Änderung: 04.02.2019, 21:24:14 von weakbit »

Re: Error bei boot beheben
« Antwort #4 am: 04.02.2019, 21:17:47 »
eventuell doch mal ein LINUX MINT installieren,
dann vielleicht ohne Errors.  ::) ;)

Re: Error bei boot beheben
« Antwort #5 am: 04.02.2019, 21:26:05 »
ich habe auch Linux Mint 18 auf meiner Everyday Maschine also das ist kein Thema das funktioniert ohne weiteres sehr gut aber der alte Rechner liegt mir am Herzen ich habe den geschenkt bekommen und jetzt tune ich den denn die Tastertur ist der Hammer man kann ur gut drauf schreiben.

Trotzdem Danke! kann man da eigneltich noch was tunen? Teile weglassen die das System nicht braucht. Bitte nicht sagen man kann auch ohne X11! ;D

LG
weakbit

hier einmal die Liste aus dem Xorg.0.log file
/var/log/Xorg.0.log
weakbit@compaq6510b:/etc/default$ sudo cat /var/log/Xorg.0.log
[sudo] Passwort für weakbit:
[    23.664]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[    23.664] X Protocol Version 11, Revision 0
[    23.664] Build Operating System: Linux 4.9.0-8-amd64 x86_64 Debian
[    23.664] Current Operating System: Linux compaq6510b 4.19.0-0.bpo.1-amd64 #1 SMP Debian 4.19.12-1~bpo9+1 (2018-12-30) x86_64
[    23.664] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-0.bpo.1-amd64 root=UUID=82e347e1-43e6-4460-b4c0-d53eb13b75a8 ro quiet splash video=SVIDEO-1:d
[    23.664] Build Date: 03 November 2018  03:09:11AM
[    23.664] xorg-server 2:1.19.2-1+deb9u5 (https://www.debian.org/support)
[    23.664] Current version of pixman: 0.34.0
[    23.664] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    23.664] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    23.664] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb  4 21:16:12 2019
[    23.779] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    23.812] (==) No Layout section.  Using the first Screen section.
[    23.812] (==) No screen section available. Using defaults.
[    23.812] (**) |-->Screen "Default Screen Section" (0)
[    23.812] (**) |   |-->Monitor "<default monitor>"
[    23.813] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    23.813] (==) Automatically adding devices
[    23.813] (==) Automatically enabling devices
[    23.813] (==) Automatically adding GPU devices
[    23.813] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    23.859] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    23.859] Entry deleted from font path.
[    23.955] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[    23.955] (==) ModulePath set to "/usr/lib/xorg/modules"
[    23.956] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    23.956] (II) Loader magic: 0x55d5a73e8e00
[    23.956] (II) Module ABI versions:
[    23.956] X.Org ANSI C Emulation: 0.4
[    23.956] X.Org Video Driver: 23.0
[    23.956] X.Org XInput driver : 24.1
[    23.956] X.Org Server Extension : 10.0
[    23.957] (++) using VT number 7

[    23.957] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    23.958] (II) xfree86: Adding drm device (/dev/dri/card0)
[    23.966] (--) PCI:*(0:0:2:0) 8086:2a02:103c:30c0 rev 12, Mem @ 0xe4600000/1048576, 0xd0000000/268435456, I/O @ 0x00004000/8, BIOS @ 0x????????/131072
[    23.966] (--) PCI: (0:0:2:1) 8086:2a03:103c:30c0 rev 12, Mem @ 0xe4700000/1048576
[    23.966] (II) LoadModule: "glx"
[    24.018] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    24.246] (II) Module glx: vendor="X.Org Foundation"
[    24.246] compiled for 1.19.2, module version = 1.0.0
[    24.246] ABI class: X.Org Server Extension, version 10.0
[    24.246] (==) Matched modesetting as autoconfigured driver 0
[    24.246] (==) Matched fbdev as autoconfigured driver 1
[    24.246] (==) Matched vesa as autoconfigured driver 2
[    24.246] (==) Assigned the driver to the xf86ConfigLayout
[    24.246] (II) LoadModule: "modesetting"
[    24.246] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    24.269] (II) Module modesetting: vendor="X.Org Foundation"
[    24.270] compiled for 1.19.2, module version = 1.19.2
[    24.270] Module class: X.Org Video Driver
[    24.270] ABI class: X.Org Video Driver, version 23.0
[    24.270] (II) LoadModule: "fbdev"
[    24.270] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    24.310] (II) Module fbdev: vendor="X.Org Foundation"
[    24.310] compiled for 1.19.0, module version = 0.4.4
[    24.310] Module class: X.Org Video Driver
[    24.310] ABI class: X.Org Video Driver, version 23.0
[    24.310] (II) LoadModule: "vesa"
[    24.310] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    24.312] (II) Module vesa: vendor="X.Org Foundation"
[    24.312] compiled for 1.19.0, module version = 2.3.4
[    24.312] Module class: X.Org Video Driver
[    24.312] ABI class: X.Org Video Driver, version 23.0
[    24.312] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    24.312] (II) FBDEV: driver for framebuffer: fbdev
[    24.312] (II) VESA: driver for VESA chipsets: vesa
[    24.332] (II) modeset(0): using drv /dev/dri/card0
[    24.332] (WW) Falling back to old probe method for fbdev
[    24.332] (II) Loading sub module "fbdevhw"
[    24.332] (II) LoadModule: "fbdevhw"
[    24.332] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    24.369] (II) Module fbdevhw: vendor="X.Org Foundation"
[    24.369] compiled for 1.19.2, module version = 0.0.2
[    24.369] ABI class: X.Org Video Driver, version 23.0
[    24.369] (WW) Falling back to old probe method for vesa
[    24.369] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    24.369] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    24.369] (==) modeset(0): RGB weight 888
[    24.369] (==) modeset(0): Default visual is TrueColor
[    24.369] (II) Loading sub module "glamoregl"
[    24.369] (II) LoadModule: "glamoregl"
[    24.369] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    24.630] (II) Module glamoregl: vendor="X.Org Foundation"
[    24.630] compiled for 1.19.2, module version = 1.0.0
[    24.630] ABI class: X.Org ANSI C Emulation, version 0.4
[    24.630] (II) glamor: OpenGL accelerated X.org driver based.
[    25.308] (II) glamor: EGL version 1.4 (DRI2):
[    25.569] (II) modeset(0): glamor initialized
[    25.570] (II) modeset(0): Output LVDS-1 has no monitor section
[    25.579] (II) modeset(0): Output VGA-1 has no monitor section
[    25.579] (II) modeset(0): Output SVIDEO-1 has no monitor section
[    25.579] (II) modeset(0): EDID for output LVDS-1
[    25.579] (II) modeset(0): Manufacturer: SEC  Model: 4542  Serial#: 0
[    25.579] (II) modeset(0): Year: 2006  Week: 0
[    25.579] (II) modeset(0): EDID Version: 1.3
[    25.579] (II) modeset(0): Digital Display Input
[    25.579] (II) modeset(0): Max Image Size [cm]: horiz.: 30  vert.: 19
[    25.579] (II) modeset(0): Gamma: 2.20
[    25.579] (II) modeset(0): No DPMS capabilities specified
[    25.579] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    25.579] (II) modeset(0): First detailed timing is preferred mode
[    25.579] (II) modeset(0): redX: 0.580 redY: 0.340   greenX: 0.310 greenY: 0.550
[    25.579] (II) modeset(0): blueX: 0.155 blueY: 0.155   whiteX: 0.313 whiteY: 0.329
[    25.579] (II) modeset(0): Manufacturer's mask: 0
[    25.579] (II) modeset(0): Supported detailed timing:
[    25.579] (II) modeset(0): clock: 68.9 MHz   Image Size:  303 x 190 mm
[    25.579] (II) modeset(0): h_active: 1280  h_sync: 1292  h_sync_end 1356 h_blank_end 1408 h_border: 0
[    25.579] (II) modeset(0): v_active: 800  v_sync: 803  v_sync_end 806 v_blanking: 816 v_border: 0
[    25.579] (II) modeset(0): Unknown vendor-specific block f
[    25.579] (II) modeset(0):  SAMSUNG
[    25.579] (II) modeset(0):  LTN141W1-L04
[    25.579] (II) modeset(0): EDID (in hex):
[    25.579] (II) modeset(0): 00ffffffffffff004ca3424500000000
[    25.579] (II) modeset(0): 00100103801e13780a87f594574f8c27
[    25.579] (II) modeset(0): 27505400000001010101010101010101
[    25.579] (II) modeset(0): 010101010101ee1a0080502010300c40
[    25.579] (II) modeset(0): 33002fbe100000190000000f00000000
[    25.579] (II) modeset(0): 00000000002387026401000000fe0053
[    25.579] (II) modeset(0): 414d53554e470a2020202020000000fe
[    25.580] (II) modeset(0): 004c544e31343157312d4c30340a0061
[    25.580] (II) modeset(0): Printing probed modes for output LVDS-1
[    25.580] (II) modeset(0): Modeline "1280x800"x60.0   68.94  1280 1292 1356 1408  800 803 806 816 -hsync -vsync (49.0 kHz eP)
[    25.580] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    25.580] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    25.580] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    25.580] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    25.580] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    25.580] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    25.580] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    25.580] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    25.580] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    25.580] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    25.580] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    25.580] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    25.580] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[    25.580] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    25.580] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    25.580] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[    25.580] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    25.580] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    25.580] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[    25.580] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[    25.580] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[    25.580] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    25.580] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    25.580] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    25.580] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    25.589] (II) modeset(0): EDID for output VGA-1
[    25.589] (II) modeset(0): EDID for output SVIDEO-1
[    25.589] (II) modeset(0): Output LVDS-1 connected
[    25.589] (II) modeset(0): Output VGA-1 disconnected
[    25.589] (II) modeset(0): Output SVIDEO-1 disconnected
[    25.589] (II) modeset(0): Using exact sizes for initial modes
[    25.589] (II) modeset(0): Output LVDS-1 using initial mode 1280x800 +0+0
[    25.589] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    25.589] (==) modeset(0): DPI set to (96, 96)
[    25.589] (II) Loading sub module "fb"
[    25.589] (II) LoadModule: "fb"
[    25.589] (II) Loading /usr/lib/xorg/modules/libfb.so
[    25.616] (II) Module fb: vendor="X.Org Foundation"
[    25.616] compiled for 1.19.2, module version = 1.0.0
[    25.616] ABI class: X.Org ANSI C Emulation, version 0.4
[    25.616] (II) UnloadModule: "fbdev"
[    25.616] (II) Unloading fbdev
[    25.617] (II) UnloadSubModule: "fbdevhw"
[    25.617] (II) Unloading fbdevhw
[    25.617] (II) UnloadModule: "vesa"
[    25.617] (II) Unloading vesa
[    25.617] (==) Depth 24 pixmap format is 32 bpp
[    25.859] (==) modeset(0): Backing store enabled
[    25.859] (==) modeset(0): Silken mouse enabled
[    25.859] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    25.907] (==) modeset(0): DPMS enabled
[    25.907] (II) modeset(0): [DRI2] Setup complete
[    25.907] (II) modeset(0): [DRI2]   DRI driver: i965
[    25.907] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    25.907] (--) RandR disabled
[    25.913] (II) SELinux: Disabled on system
[    25.924] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    25.924] (II) AIGLX: enabled GLX_ARB_create_context
[    25.924] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    25.924] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    25.924] (II) AIGLX: enabled GLX_INTEL_swap_event
[    25.924] (II) AIGLX: enabled GLX_SGI_swap_control
[    25.924] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    25.924] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    25.924] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    25.924] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    25.924] (II) AIGLX: Loaded and initialized i965
[    25.924] (II) GLX: Initialized DRI2 GL provider for screen 0
[    25.936] (II) modeset(0): Damage tracking initialized
[    25.936] (II) modeset(0): Setting screen physical size to 338 x 211
[    26.333] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    26.333] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    26.333] (II) LoadModule: "libinput"
[    26.333] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    26.404] (II) Module libinput: vendor="X.Org Foundation"
[    26.404] compiled for 1.19.0, module version = 0.23.0
[    26.404] Module class: X.Org XInput Driver
[    26.404] ABI class: X.Org XInput driver, version 24.1
[    26.404] (II) Using input driver 'libinput' for 'Power Button'
[    26.404] (**) Power Button: always reports core events
[    26.404] (**) Option "Device" "/dev/input/event4"
[    26.404] (**) Option "_source" "server/udev"
[    26.405] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    26.405] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    26.424] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input12/event4"
[    26.424] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    26.424] (**) Option "xkb_model" "pc105"
[    26.424] (**) Option "xkb_layout" "de"
[    26.469] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    26.469] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    26.470] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[    26.470] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    26.470] (II) Using input driver 'libinput' for 'Video Bus'
[    26.470] (**) Video Bus: always reports core events
[    26.470] (**) Option "Device" "/dev/input/event6"
[    26.470] (**) Option "_source" "server/udev"
[    26.471] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[    26.471] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[    26.488] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event6"
[    26.488] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    26.488] (**) Option "xkb_model" "pc105"
[    26.488] (**) Option "xkb_layout" "de"
[    26.490] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[    26.490] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[    26.491] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    26.491] (II) No input driver specified, ignoring this device.
[    26.491] (II) This device may have been added with another device file.
[    26.493] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    26.493] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    26.493] (II) Using input driver 'libinput' for 'Sleep Button'
[    26.493] (**) Sleep Button: always reports core events
[    26.493] (**) Option "Device" "/dev/input/event2"
[    26.493] (**) Option "_source" "server/udev"
[    26.494] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[    26.494] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[    26.508] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input10/event2"
[    26.508] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    26.508] (**) Option "xkb_model" "pc105"
[    26.508] (**) Option "xkb_layout" "de"
[    26.509] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[    26.509] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[    26.510] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[    26.510] (II) No input driver specified, ignoring this device.
[    26.510] (II) This device may have been added with another device file.
[    26.511] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event8)
[    26.511] (II) No input driver specified, ignoring this device.
[    26.511] (II) This device may have been added with another device file.
[    26.512] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event9)
[    26.512] (II) No input driver specified, ignoring this device.
[    26.512] (II) This device may have been added with another device file.
[    26.513] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[    26.513] (II) No input driver specified, ignoring this device.
[    26.513] (II) This device may have been added with another device file.
[    26.514] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event13)
[    26.514] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[    26.514] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[    26.514] (**) Logitech USB Optical Mouse: always reports core events
[    26.514] (**) Option "Device" "/dev/input/event13"
[    26.514] (**) Option "_source" "server/udev"
[    26.515] (II) input device 'Logitech USB Optical Mouse', /dev/input/event13 is tagged by udev as: Mouse
[    26.515] (II) Device 'Logitech USB Optical Mouse' set to 1000 DPI
[    26.516] (II) input device 'Logitech USB Optical Mouse', /dev/input/event13 is a pointer caps
[    26.552] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb5/5-2/5-2:1.0/0003:046D:C05A.0001/input/input21/event13"
[    26.552] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[    26.552] (**) Option "AccelerationScheme" "none"
[    26.553] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[    26.553] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    26.553] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    26.554] (II) input device 'Logitech USB Optical Mouse', /dev/input/event13 is tagged by udev as: Mouse
[    26.554] (II) Device 'Logitech USB Optical Mouse' set to 1000 DPI
[    26.554] (II) input device 'Logitech USB Optical Mouse', /dev/input/event13 is a pointer caps
[    26.555] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
[    26.555] (II) No input driver specified, ignoring this device.
[    26.555] (II) This device may have been added with another device file.
[    26.556] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    26.556] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    26.556] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    26.556] (**) AT Translated Set 2 keyboard: always reports core events
[    26.556] (**) Option "Device" "/dev/input/event0"
[    26.556] (**) Option "_source" "server/udev"
[    26.557] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    26.557] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    26.588] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    26.588] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[    26.588] (**) Option "xkb_model" "pc105"
[    26.588] (**) Option "xkb_layout" "de"
[    26.590] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    26.590] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    26.591] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[    26.591] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    26.591] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[    26.591] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    26.591] (**) Option "Device" "/dev/input/event1"
[    26.591] (**) Option "_source" "server/udev"
[    26.592] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    26.592] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    26.640] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event1"
[    26.640] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[    26.641] (**) Option "AccelerationScheme" "none"
[    26.641] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[    26.641] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    26.641] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    26.642] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is tagged by udev as: Touchpad
[    26.642] (II) input device 'SynPS/2 Synaptics TouchPad', /dev/input/event1 is a touchpad
[    26.643] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    26.643] (II) No input driver specified, ignoring this device.
[    26.644] (II) This device may have been added with another device file.
[    26.645] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[    26.645] (II) No input driver specified, ignoring this device.
[    26.645] (II) This device may have been added with another device file.
[    26.646] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    26.646] (II) No input driver specified, ignoring this device.
[    26.646] (II) This device may have been added with another device file.
[    26.647] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[    26.647] (II) No input driver specified, ignoring this device.
[    26.647] (II) This device may have been added with another device file.
[    26.649] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event12)
[    26.649] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    26.649] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[    26.649] (**) HP WMI hotkeys: always reports core events
[    26.649] (**) Option "Device" "/dev/input/event12"
[    26.649] (**) Option "_source" "server/udev"
[    26.650] (II) input device 'HP WMI hotkeys', /dev/input/event12 is tagged by udev as: Keyboard
[    26.650] (II) input device 'HP WMI hotkeys', /dev/input/event12 is a keyboard
[    26.664] (**) Option "config_info" "udev:/sys/devices/virtual/input/input20/event12"
[    26.664] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 12)
[    26.664] (**) Option "xkb_model" "pc105"
[    26.664] (**) Option "xkb_layout" "de"
[    26.665] (II) input device 'HP WMI hotkeys', /dev/input/event12 is tagged by udev as: Keyboard
[    26.665] (II) input device 'HP WMI hotkeys', /dev/input/event12 is a keyboard
[    43.689] (II) modeset(0): EDID vendor "SEC", prod id 17730
[    43.689] (II) modeset(0): Printing DDC gathered Modelines:
[    43.689] (II) modeset(0): Modeline "1280x800"x0.0   68.94  1280 1292 1356 1408  800 803 806 816 -hsync -vsync (49.0 kHz eP)
[    44.120] (II) modeset(0): EDID vendor "SEC", prod id 17730
[    44.120] (II) modeset(0): Printing DDC gathered Modelines:
[    44.120] (II) modeset(0): Modeline "1280x800"x0.0   68.94  1280 1292 1356 1408  800 803 806 816 -hsync -vsync (49.0 kHz eP)
« Letzte Änderung: 04.02.2019, 21:38:00 von weakbit »

Re: Error bei boot beheben
« Antwort #6 am: 04.02.2019, 21:32:32 »
Off-Topic:
Zitat
… denn die Tastertur ist der Hammer man kann ur gut drauf schreiben.
Hat aber kein Komma, oder? :D Schade eigentlich, die machen Sätze verständlicher. :-*

Re: Error bei boot beheben
« Antwort #7 am: 04.02.2019, 21:38:52 »
für was brauchst Du ein ,  :P

Re: Error bei boot beheben
« Antwort #8 am: 04.02.2019, 21:47:36 »
Du solltest dir dringend abgewöhnen, vor alles wahllos ein sudo zu setzen! Das kann auch mal ins Auge gehen.
uname und cat brauchen niemals ein sudo.

Re: Error bei boot beheben
« Antwort #9 am: 04.02.2019, 22:03:38 »
@toffifee Du meinst
weakbit@compaq6510b:/$ sudo rm .*
zum Beispiel. Ich habe geglaubt das man die System log files nur als sudo anschauen darf - OK ich habe was gelernt - DANKE nochmal!
Das wusste ich nicht normal brauche ich das sudo so gut wie nie bin ja neu hier.
« Letzte Änderung: 04.02.2019, 22:09:14 von weakbit »

Re: Error bei boot beheben
« Antwort #10 am: 04.02.2019, 22:13:02 »
Zitat
normal brauche ich das sudo so gut wie nie
..Du hast es vor "Alles" gesetzt!

Ich empfehle Dir einen Blick hier hinein:

https://wiki.ubuntuusers.de/sudo/
« Letzte Änderung: 04.02.2019, 22:22:05 von Hollex »

Re: Error bei boot beheben
« Antwort #11 am: 04.02.2019, 22:45:47 »
Off-Topic:
für was brauchst Du ein , 
Ein Komma kann Leben retten:
Komm wir essen Opa!
Komm wir essen, Opa!

Re: Error bei boot beheben
« Antwort #12 am: 05.02.2019, 10:52:35 »
Ein Komma kann Leben retten:
Oder Glauben erschüttern....
"Der Mensch denkt, Gott lenkt. - Der Mensch, denkt Gott, lenkt." :)

Im Ernst: gerade wenn man keine Erfahrung hat, probiert man Befehle immer zunächst ohne sudo. Erst wenn Rootrechte angefordert werden, nimmt man es - wenn man weiß was man tut. Ich empfehle dir den genannten Link unbedingt mal zu lesen.

Re: Error bei boot beheben
« Antwort #13 am: 05.02.2019, 15:07:51 »
Beistriche werden vollkommen überbewertet. Geld wird ja auch überbewertet.

Re: Error bei boot beheben
« Antwort #14 am: 05.02.2019, 17:18:48 »
@weakbit
Ob Komma oder Beistriche überbewertet werden - oder nicht  ;D
Setzt du das Thema bitte noch auf "gelöst" - WIE ? - siehe oben im Menü "Hilfe"