Willkommen Gast. Bitte einloggen oder registrieren. Haben Sie Ihre Aktivierungs E-Mail übersehen?
10.05.2021, 04:46:34

.
Einloggen mit Benutzername, Passwort und Sitzungslänge

Mitglieder
Statistiken
  • Beiträge insgesamt: 734351
  • Themen insgesamt: 59161
  • Heute online: 403
  • Am meisten online: 2287
  • (22.01.2020, 19:20:24)
Benutzer Online
Mitglieder: 0
Gäste: 332
Gesamt: 332

Autor Thema:  Logitech Lautsprecher ohne Sound / Mint Mate  (Gelesen 3950 mal)

0 Mitglieder und 1 Gast betrachten dieses Thema.

Re: Logitech Lautsprecher ohne Sound / Mint Mate
« Antwort #15 am: 09.09.2013, 22:14:43 »
jep, über die packetverwaltung hab ich den Begriff alsa-firmeware eingeben, und beide Pakete, alsa-firmeware alsa-firmeware-loader wurden angezeigt, so hab ich sie installiert und neugestartet

Re: Logitech Lautsprecher ohne Sound / Mint Mate
« Antwort #16 am: 09.09.2013, 22:15:45 »



HIER

rameshwara@rameshwara ~ $ cat /proc/asound/cards
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xf7adc000 irq 51

Re: Logitech Lautsprecher ohne Sound / Mint Mate
« Antwort #17 am: 09.09.2013, 22:17:40 »
Zeig auch mal bitte
uname -r
Was ich sonst auch noch versuchen würde, ist, den internen Soundchip mal versuchsweise im BIOS zu deaktivieren.

Re: Logitech Lautsprecher ohne Sound / Mint Mate
« Antwort #18 am: 09.09.2013, 22:21:27 »
rameshwara@rameshwara ~ $ uname -r
3.2.0-53-generic


Re: Logitech Lautsprecher ohne Sound / Mint Mate
« Antwort #19 am: 09.09.2013, 22:23:23 »
Also ich würde das mal versuchen mit der Deaktivierung des internen Chips.

Sonst fiele mir jetzt nur noch die Installation des Backport-Kernels von Raring ein als weiterer Versuch.

Ach ja, was noch interessant wäre, ist, ob sich mit
dmesgwas von dem Ding zeigt, wenn mal es mal abzieht und wieder dransteckt dann.
« Letzte Änderung: 09.09.2013, 22:32:29 von leonidas »

Re: Logitech Lautsprecher ohne Sound / Mint Mate
« Antwort #20 am: 09.09.2013, 23:25:38 »


Was ich sonst auch noch versuchen würde, ist, den internen Soundchip mal versuchsweise im BIOS zu deaktivieren.

ich hab eben mal das BIOS durchforstet, mein englisch is nicht so dolle, wie könnte der Chip im Bios heißen

Re: Logitech Lautsprecher ohne Sound / Mint Mate
« Antwort #21 am: 09.09.2013, 23:32:27 »
den Stecker von den Lautsprechern hab ich immer wieder mal abgezogen, auch mal einen anderen USB-Port probiert?...bringt nicht wirklich was...

jetzt auch mal den Code probiert, eine unendliche Liste an Daten die da ausgespuckt werden???
ich poste es einfach mal???

[    3.197294] Expanded resource reserved due to conflict with PCI Bus 0000:00
[    3.197296] Expanded resource reserved due to conflict with PCI Bus 0000:00
[    3.197298] reserve RAM buffer: 000000000009a800 - 000000000009ffff
[    3.197301] reserve RAM buffer: 00000000ddbffc00 - 00000000dfffffff
[    3.197402] NetLabel: Initializing
[    3.197403] NetLabel:  domain hash size = 128
[    3.197404] NetLabel:  protocols = UNLABELED CIPSOv4
[    3.197414] NetLabel:  unlabeled traffic allowed by default
[    3.197471] HPET: 8 timers in total, 5 timers will be used for per-cpu timer
[    3.197471] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0
[    3.197471] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    3.200224] hpet: hpet2 irq 40 for MSI
[    3.200256] hpet: hpet3 irq 41 for MSI
[    3.200256] Switching to clocksource hpet
[    3.206280] AppArmor: AppArmor Filesystem Enabled
[    3.206310] pnp: PnP ACPI init
[    3.206324] ACPI: bus type pnp registered
[    3.214617] pnp 00:00: [bus 00-ff]
[    3.214619] pnp 00:00: [io  0x0cf8-0x0cff]
[    3.214621] pnp 00:00: [io  0x0000-0x0cf7 window]
[    3.214623] pnp 00:00: [io  0x0d00-0xffff window]
[    3.214625] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    3.214626] pnp 00:00: [mem 0x000c0000-0x000effff window]
[    3.214628] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    3.214630] pnp 00:00: [mem 0xfc000000-0xfec00000 window]
[    3.214631] pnp 00:00: [mem 0xddd00000-0xf7ffffff window]
[    3.214633] pnp 00:00: [mem 0xfc000000-0xefffffff window]
[    3.214635] pnp 00:00: [mem 0xff980000-0xff980fff window]
[    3.214637] pnp 00:00: [mem 0xff97c000-0xff97ffff window]
[    3.214638] pnp 00:00: [mem 0xff970000-0xff9707ff window]
[    3.214640] pnp 00:00: [mem 0xfed20000-0xfed9ffff window]
[    3.214642] pnp 00:00: [mem 0xfeda6000-0xfeda6fff window]
[    3.214643] pnp 00:00: [mem 0xfeda7000-0xfeda7fff window]
[    3.214681] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[    3.218859] pnp 00:01: [io  0x0060]
[    3.218860] pnp 00:01: [io  0x0064]
[    3.218862] pnp 00:01: [io  0x0062-0x0063]
[    3.218863] pnp 00:01: [io  0x0065-0x006f]
[    3.218865] pnp 00:01: [io  0x00e0-0x00ef]
[    3.218866] pnp 00:01: [io  0x0800-0x085f]
[    3.218868] pnp 00:01: [io  0x0c00-0x0c7f]
[    3.218870] pnp 00:01: [io  0x0860-0x08ff]
[    3.218924] system 00:01: [io  0x0800-0x085f] has been reserved
[    3.218926] system 00:01: [io  0x0c00-0x0c7f] has been reserved
[    3.218928] system 00:01: [io  0x0860-0x08ff] has been reserved
[    3.218931] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    3.219207] pnp 00:02: [io  0x0080-0x009f]
[    3.219209] pnp 00:02: [io  0x0000-0x001f]
[    3.219210] pnp 00:02: [io  0x00c0-0x00df]
[    3.219212] pnp 00:02: [dma 4]
[    3.219235] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    3.219439] pnp 00:03: [io  0x00f0-0x00ff]
[    3.219449] pnp 00:03: [irq 13]
[    3.219469] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[    3.219662] pnp 00:04: [io  0x0061]
[    3.219684] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    3.219888] pnp 00:05: [io  0x0070-0x007f]
[    3.219893] pnp 00:05: [irq 8]
[    3.219915] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    3.236391] pnp 00:06: [io  0x0378-0x037f]
[    3.236393] pnp 00:06: [io  0x0778-0x077f]
[    3.236397] pnp 00:06: [irq 7]
[    3.236399] pnp 00:06: [dma 0 disabled]
[    3.237588] pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
[    3.243094] pnp 00:07: [io  0x03f8-0x03ff]
[    3.243099] pnp 00:07: [irq 4]
[    3.243494] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    3.262380] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[    3.262410] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[    3.262415] pnp: PnP ACPI: found 9 devices
[    3.262417] ACPI: ACPI bus type pnp unregistered
[    3.269105] PCI: max bus depth: 1 pci_try_num: 2
[    3.269134] pci 0000:00:1c.1: BAR 15: assigned [mem 0xfc000000-0xfc1fffff 64bit pref]
[    3.269137] pci 0000:00:1c.1: BAR 13: assigned [io  0x1000-0x1fff]
[    3.269140] pci 0000:00:1c.0: BAR 15: assigned [mem 0xfc200000-0xfc3fffff 64bit pref]
[    3.269143] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    3.269145] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    3.269148] pci 0000:00:01.0:   bridge window [mem 0xf7900000-0xf79fffff]
[    3.269152] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    3.269154] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    3.269158] pci 0000:00:1c.0:   bridge window [mem 0xf7800000-0xf78fffff]
[    3.269162] pci 0000:00:1c.0:   bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
[    3.269167] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    3.269169] pci 0000:00:1c.1:   bridge window [io  0x1000-0x1fff]
[    3.269173] pci 0000:00:1c.1:   bridge window [mem 0xf7700000-0xf77fffff]
[    3.269176] pci 0000:00:1c.1:   bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
[    3.269181] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[    3.269200] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.269203] pci 0000:00:01.0: setting latency timer to 64
[    3.269208] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.269211] pci 0000:00:1c.0: setting latency timer to 64
[    3.269219] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    3.269222] pci 0000:00:1c.1: setting latency timer to 64
[    3.269227] pci 0000:00:1e.0: setting latency timer to 64
[    3.269230] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    3.269232] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    3.269234] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    3.269236] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
[    3.269237] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
[    3.269239] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfec00000]
[    3.269241] pci_bus 0000:00: resource 10 [mem 0xddd00000-0xf7ffffff]
[    3.269243] pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff]
[    3.269245] pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
[    3.269246] pci_bus 0000:00: resource 13 [mem 0xff970000-0xff9707ff]
[    3.269248] pci_bus 0000:00: resource 14 [mem 0xfed20000-0xfed9ffff]
[    3.269250] pci_bus 0000:00: resource 15 [mem 0xfeda6000-0xfeda6fff]
[    3.269252] pci_bus 0000:00: resource 16 [mem 0xfeda7000-0xfeda7fff]
[    3.269254] pci_bus 0000:01: resource 1 [mem 0xf7900000-0xf79fffff]
[    3.269256] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    3.269259] pci_bus 0000:02: resource 1 [mem 0xf7800000-0xf78fffff]
[    3.269261] pci_bus 0000:02: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref]
[    3.269264] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    3.269266] pci_bus 0000:03: resource 1 [mem 0xf7700000-0xf77fffff]
[    3.269269] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref]
[    3.269271] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
[    3.269274] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
[    3.269276] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[    3.269278] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff]
[    3.269281] pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff]
[    3.269283] pci_bus 0000:04: resource 9 [mem 0xfc000000-0xfec00000]
[    3.269286] pci_bus 0000:04: resource 10 [mem 0xddd00000-0xf7ffffff]
[    3.269288] pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff]
[    3.269290] pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff]
[    3.269293] pci_bus 0000:04: resource 13 [mem 0xff970000-0xff9707ff]
[    3.269295] pci_bus 0000:04: resource 14 [mem 0xfed20000-0xfed9ffff]
[    3.269298] pci_bus 0000:04: resource 15 [mem 0xfeda6000-0xfeda6fff]
[    3.269300] pci_bus 0000:04: resource 16 [mem 0xfeda7000-0xfeda7fff]
[    3.269333] NET: Registered protocol family 2
[    3.269448] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    3.270305] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    3.273299] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    3.273689] TCP: Hash tables configured (established 524288 bind 65536)
[    3.273691] TCP reno registered
[    3.273698] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    3.273729] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    3.273861] NET: Registered protocol family 1
[    3.273881] pci 0000:00:02.0: Boot video device
[    3.273903] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.273919] pci 0000:00:1a.0: PCI INT A disabled
[    3.273925] pci 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    3.273940] pci 0000:00:1a.1: PCI INT B disabled
[    3.273956] pci 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    3.273970] pci 0000:00:1a.2: PCI INT C disabled
[    3.273977] pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    3.274003] pci 0000:00:1a.7: PCI INT C disabled
[    3.274017] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.274032] pci 0000:00:1d.0: PCI INT A disabled
[    3.274038] pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    3.274053] pci 0000:00:1d.1: PCI INT B disabled
[    3.274064] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.274079] pci 0000:00:1d.2: PCI INT C disabled
[    3.274086] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.274109] pci 0000:00:1d.7: PCI INT A disabled
[    3.274119] PCI: CLS 64 bytes, default 64
[    3.274121] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    3.274123] Placing 64MB software IO TLB between ffff8800d9bfd000 - ffff8800ddbfd000
[    3.274125] software IO TLB at phys 0xd9bfd000 - 0xddbfd000
[    3.274133] Simple Boot Flag at 0x7a set to 0x80
[    3.274434] audit: initializing netlink socket (disabled)
[    3.274443] type=2000 audit(1378760794.268:1): initialized
[    3.291942] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    3.293863] VFS: Disk quotas dquot_6.5.2
[    3.293908] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    3.294314] fuse init (API version 7.17)
[    3.294395] msgmni has been set to 7577
[    3.294681] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    3.294704] io scheduler noop registered
[    3.294706] io scheduler deadline registered
[    3.294733] io scheduler cfq registered (default)
[    3.294816] pcieport 0000:00:01.0: setting latency timer to 64
[    3.294841] pcieport 0000:00:01.0: irq 45 for MSI/MSI-X
[    3.294879] pcieport 0000:00:1c.0: setting latency timer to 64
[    3.294910] pcieport 0000:00:1c.0: irq 46 for MSI/MSI-X
[    3.294958] pcieport 0000:00:1c.1: setting latency timer to 64
[    3.294988] pcieport 0000:00:1c.1: irq 47 for MSI/MSI-X
[    3.295055] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    3.295071] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    3.295115] intel_idle: MWAIT substates: 0x22220
[    3.295116] intel_idle: does not run on family 6 model 23
[    3.295173] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    3.295178] ACPI: Power Button [VBTN]
[    3.295219] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    3.295222] ACPI: Power Button [PWRF]
[    3.296782] Monitor-Mwait will be used to enter C-1 state
[    3.434207] ERST: Table is not found!
[    3.434209] GHES: HEST is not enabled!
[    3.434273] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    3.454625] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    3.576492] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    3.576573] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    3.596650] 0000:00:03.3: ttyS4 at I/O 0xecb8 (irq = 17) is a 16550A
[    3.597030] Linux agpgart interface v0.103
[    3.597102] agpgart-intel 0000:00:00.0: Intel Q45/Q43 Chipset
[    3.597177] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    3.598002] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    3.598118] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    3.599392] brd: module loaded
[    3.600079] loop: module loaded
[    3.600194] ahci 0000:00:1f.2: version 3.0
[    3.600203] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.600241] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
[    3.600248] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[    3.600298] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl RAID mode
[    3.600300] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio ems sxs
[    3.600304] ahci 0000:00:1f.2: setting latency timer to 64
[    3.632540] scsi0 : ahci
[    3.632625] scsi1 : ahci
[    3.632694] scsi2 : ahci
[    3.632760] scsi3 : ahci
[    3.632825] scsi4 : ahci
[    3.632889] scsi5 : ahci
[    3.632927] ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 48
[    3.632930] ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 48
[    3.632932] ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 48
[    3.632934] ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 48
[    3.632936] ata5: DUMMY
[    3.632938] ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 48
[    3.633016] pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.633035] pata_acpi 0000:00:03.2: setting latency timer to 64
[    3.633045] pata_acpi 0000:00:03.2: PCI INT C disabled
[    3.633072] ata_generic 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.633086] ata_generic 0000:00:03.2: setting latency timer to 64
[    3.633327] scsi6 : ata_generic
[    3.633384] scsi7 : ata_generic
[    3.633417] ata7: PATA max UDMA/100 cmd 0xfe80 ctl 0xfe90 bmdma 0xfef0 irq 18
[    3.633419] ata8: PATA max UDMA/100 cmd 0xfea0 ctl 0xfeb0 bmdma 0xfef8 irq 18
[    3.633650] Fixed MDIO Bus: probed
[    3.633666] tun: Universal TUN/TAP device driver, 1.6
[    3.633668] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    3.633720] PPP generic driver version 2.4.2
[    3.633809] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.633824] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    3.633837] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    3.633840] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    3.633884] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    3.633909] ehci_hcd 0000:00:1a.7: debug port 1
[    3.637804] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    3.637817] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xf7ada000
[    3.652020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    3.652192] hub 1-0:1.0: USB hub found
[    3.652198] hub 1-0:1.0: 6 ports detected
[    3.652264] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.652273] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    3.652276] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.652311] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    3.652332] ehci_hcd 0000:00:1d.7: debug port 1
[    3.656205] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    3.656216] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980000
[    3.672020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.672172] hub 2-0:1.0: USB hub found
[    3.672178] hub 2-0:1.0: 6 ports detected
[    3.672249] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.672259] uhci_hcd: USB Universal Host Controller Interface driver
[    3.672274] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.672280] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    3.672282] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    3.672319] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    3.672346] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[    3.672447] hub 3-0:1.0: USB hub found
[    3.672450] hub 3-0:1.0: 2 ports detected
[    3.672499] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    3.672505] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    3.672507] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    3.672544] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    3.672571] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[    3.672670] hub 4-0:1.0: USB hub found
[    3.672673] hub 4-0:1.0: 2 ports detected
[    3.672720] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    3.672726] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    3.672728] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    3.672767] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    3.672786] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
[    3.672884] hub 5-0:1.0: USB hub found
[    3.672887] hub 5-0:1.0: 2 ports detected
[    3.672935] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.672941] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.672943] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.672985] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    3.673006] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[    3.673105] hub 6-0:1.0: USB hub found
[    3.673108] hub 6-0:1.0: 2 ports detected
[    3.673156] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    3.673161] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.673164] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.673200] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    3.673219] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[    3.673323] hub 7-0:1.0: USB hub found
[    3.673326] hub 7-0:1.0: 2 ports detected
[    3.673374] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.673379] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.673381] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.673417] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    3.673437] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[    3.673536] hub 8-0:1.0: USB hub found
[    3.673539] hub 8-0:1.0: 2 ports detected
[    3.673627] usbcore: registered new interface driver libusual
[    3.673654] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    3.676538] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.676543] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.676645] mousedev: PS/2 mouse device common for all mice
[    3.676755] rtc_cmos 00:05: RTC can wake from S4
[    3.676842] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    3.676863] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
[    3.676927] device-mapper: uevent: version 1.0.3
[    3.676981] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    3.676988] cpuidle: using governor ladder
[    3.676989] cpuidle: using governor menu
[    3.676991] EFI Variables Facility v0.08 2004-May-17
[    3.677178] TCP cubic registered
[    3.677260] NET: Registered protocol family 10
[    3.677638] NET: Registered protocol family 17
[    3.677641] Registering the dns_resolver key type
[    3.677734] PM: Hibernation image not present or could not be loaded.
[    3.677744] registered taskstats version 1
[    3.682480]   Magic number: 13:985:145
[    3.682503] ata_port ata2: hash matches
[    3.682505]  ata2: hash matches
[    3.682579] rtc_cmos 00:05: setting system clock to 2013-09-09 21:06:34 UTC (1378760794)
[    3.682595] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.682596] EDD information not available.
[    3.952030] ata4: SATA link down (SStatus 0 SControl 300)
[    3.952050] ata3: SATA link down (SStatus 0 SControl 300)
[    3.952069] ata6: SATA link down (SStatus 0 SControl 300)
[    3.952086] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.952107] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.955892] ata2.00: ATAPI: HL-DT-ST DVD-ROM DH20N, A102, max UDMA/100
[    3.956795] ata2.00: configured for UDMA/100
[    3.963641] ata1.00: ATA-8: KINGSTON SV300S37A120G, 506ABBF0, max UDMA/133
[    3.963646] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.974016] ata1.00: configured for UDMA/133
[    3.974163] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SV300S3 506A PQ: 0 ANSI: 5
[    3.974282] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    3.974304] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.974332] sd 0:0:0:0: [sda] Write Protect is off
[    3.974334] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.974356] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.975024]  sda: sda1 sda2 < sda5 >
[    3.975339] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.978868] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-ROM DH20N    A102 PQ: 0 ANSI: 5
[    3.981633] sr0: scsi3-mmc drive: 12x/48x cd/rw xa/form2 cdda tray
[    3.981636] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.981777] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.981845] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.148187] Freeing unused kernel memory: 924k freed
[    4.148402] Write protecting the kernel read-only data: 12288k
[    4.152587] Freeing unused kernel memory: 1588k freed
[    4.156039] Freeing unused kernel memory: 1188k freed
[    4.167782] udevd[99]: starting version 175
[    4.200756] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[    4.200759] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[    4.200795] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    4.200804] e1000e 0000:00:19.0: setting latency timer to 64
[    4.200888] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
[    4.268278] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.272046] Refined TSC clocksource calibration: 2925.644 MHz.
[    4.272051] Switching to clocksource tsc
[    4.372015] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[    4.400285] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:25:64:ae:da:ef
[    4.400287] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[    4.400321] e1000e 0000:00:19.0: eth0: MAC: 8, PHY: 8, PBA No: 2011FF-0FF
[    4.548611] usb 4-1: config index 0 descriptor too short (expected 233, got 217)
[    4.548616] usb 4-1: config 1 has an invalid descriptor of length 1, skipping remainder of the config
[    4.548621] usb 4-1: config 1 has 1 interface, different from the descriptor's value: 3
[    4.609584] Adding 4059132k swap on /dev/sda5.  Priority:-1 extents:1 across:4059132k SS
[    4.616695] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    4.621385] udevd[321]: starting version 175
[    4.657447] mei: module is from the staging directory, the quality is unknown, you have been warned.
[    4.657699] mei 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.657706] mei 0000:00:03.0: setting latency timer to 64
[    4.657763] mei 0000:00:03.0: irq 50 for MSI/MSI-X
[    4.662862] lp: driver loaded but no devices found
[    4.694018] [drm] Initialized drm 1.1.0 20060810
[    4.694295] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    4.738175] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    4.738181] i915 0000:00:02.0: setting latency timer to 64
[    4.764135] parport_pc 00:06: reported by Plug and Play ACPI
[    4.764190] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[    4.771469] ip_tables: (C) 2000-2006 Netfilter Core Team
[    4.777180] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    4.798641] i915 0000:00:02.0: irq 51 for MSI/MSI-X
[    4.798645] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    4.798647] [drm] Driver supports precise vblank timestamp query.
[    4.798713] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.804818] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    4.806396] wmi: Mapper loaded
[    4.828042] usb 8-1: new low-speed USB device number 2 using uhci_hcd
[    4.866396] lp0: using parport0 (interrupt-driven).
[    4.872380] ppdev: user-space parallel port driver
[    4.880520] Bluetooth: Core ver 2.16
[    4.880555] NET: Registered protocol family 31
[    4.880557] Bluetooth: HCI device and connection manager initialized
[    4.880559] Bluetooth: HCI socket layer initialized
[    4.880561] Bluetooth: L2CAP socket layer initialized
[    4.880567] Bluetooth: SCO socket layer initialized
[    4.904620] Bluetooth: RFCOMM TTY layer initialized
[    4.904624] Bluetooth: RFCOMM socket layer initialized
[    4.904626] Bluetooth: RFCOMM ver 1.11
[    4.979270] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.979273] Bluetooth: BNEP filters: protocol multicast
[    4.980545] cannot find UAC_HEADER
[    4.980563] snd-usb-audio: probe of 4-1:1.0 failed with error -5
[    4.988144] usbcore: registered new interface driver snd-usb-audio
[    5.003003] fbcon: inteldrmfb (fb0) is primary device
[    5.003063] Console: switching to colour frame buffer device 240x75
[    5.003094] fb0: inteldrmfb frame buffer device
[    5.003095] drm: registered panic notifier
[    5.003162] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    5.003202] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.003266] snd_hda_intel 0000:00:1b.0: irq 52 for MSI/MSI-X
[    5.003314] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    5.023862] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    5.082173] init: failsafe main process (632) killed by TERM signal
[    5.176473] input: Dell WMI hotkeys as /devices/virtual/input/input2
[    5.256166] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
[    5.286815] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
[    5.286990] generic-usb 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:1d.2-1/input0
[    5.312073] e1000e 0000:00:19.0: irq 49 for MSI/MSI-X
[    5.312492] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.312743] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.328054] usb 8-2: new full-speed USB device number 3 using uhci_hcd
[    5.329663] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input4
[    5.329811] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:1d.2-1/input1
[    5.329833] usbcore: registered new interface driver usbhid
[    5.329835] usbhid: USB HID core driver
[    5.504969] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input5
[    5.505130] generic-usb 0003:09DA:9090.0003: input,hiddev0,hidraw2: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:1d.2-2/input0
[    5.506794] input: A4TECH USB Device as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input6
[    5.506877] generic-usb 0003:09DA:9090.0004: input,hidraw3: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:1d.2-2/input1
[    6.138340] init: plymouth-stop pre-start process (1298) terminated with status 1
[    6.892891] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[    6.892895] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[    6.893228] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   17.432011] eth0: no IPv6 routers present
[   36.060634] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:87:57:f9:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[  161.124709] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:87:57:f9:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[  286.188654] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:87:57:f9:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[  411.252731] [UFW BLOCK] IN=eth0 OUT= MAC=01:00:5e:00:00:01:00:1f:3f:87:57:f9:08:00 SRC=192.168.2.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x80 TTL=1 ID=0 DF PROTO=2
[  506.320060] usb 4-1: USB disconnect, device number 2
[  510.644023] usb 4-1: new full-speed USB device number 3 using uhci_hcd
[  510.820245] usb 4-1: config index 0 descriptor too short (expected 233, got 217)
[  510.820250] usb 4-1: config 1 has an invalid descriptor of length 1, skipping remainder of the config
[  510.820254] usb 4-1: config 1 has 1 interface, different from the descriptor's value: 3
[  510.854262] cannot find UAC_HEADER
[  510.854278] snd-usb-audio: probe of 4-1:1.0 failed with error -5




Re: Logitech Lautsprecher ohne Sound / Mint Mate
« Antwort #22 am: 10.09.2013, 00:09:54 »


Was ich sonst auch noch versuchen würde, ist, den internen Soundchip mal versuchsweise im BIOS zu deaktivieren.

ich hab eben mal das BIOS durchforstet, mein englisch is nicht so dolle, wie könnte der Chip im Bios heißen


OK, hab im BIOS ne Funktion gefunden die Audio heißt, hab den Haken rausgemacht - den USB-Stecker gezogen, nochmal rein, dann hab ich noch mal in die Audio-Einstellungen geschaut und die Lautsprecher von Logitech sind gefunden  ;)
DANKE
« Letzte Änderung: 10.09.2013, 00:19:25 von Ramesh »

chakko

  • Gast
Re: Logitech Lautsprecher ohne Sound / Mint Mate
« Antwort #23 am: 10.09.2013, 01:44:08 »
OK, hab im BIOS ne Funktion gefunden die Audio heißt, hab den Haken rausgemacht - den USB-Stecker gezogen, nochmal rein, dann hab ich noch mal in die Audio-Einstellungen geschaut und die Lautsprecher von Logitech sind gefunden  ;)
DANKE

Sowas blödes... normalerweise ist es kein Problem 2 oder mehr Soundkarten im System zu haben. Habe selbst den Onboardchip und eine Soundbar aktiv auf meinem Laptop. Naja, hauptsache es läuft, und so ist es ja auch sauberer, wenn nur die Lautsprecher funzen. :)

Re: Logitech Lautsprecher ohne Sound / Mint Mate
« Antwort #24 am: 15.01.2015, 19:30:48 »
Hi Leute,
bei mir hat das so funktioniert (Linux Mint 17.1 KDE):
man geht auf's Hauptmenue waehlt Systemeinstellungen dann Mutimedia
markiert "Audio-Wiedergabe" links und schiebt rechts "USB AUDIO Anaog
Stereo" ganz nach oben
Dann wird der Sound auf die Boxen geleitet. Es koennte sein, dass dein Sound daadurch auf die Boxen geleitet wurde, weil nur noch ein Audiogeraet da war
MfG
Holger